No photo of 宗德 方

View Scopus Profile

Fang Zongde

Professor

Calculated based on number of publications stored in Pure and citations from Scopus
1985 …2025

Research activity per year

  • 300 Article
  • 53 Conference contribution
  • 2 Conference article
Filter
Conference contribution

Search results

  • 2018

    Calculation of Tooth Surface Equation for Spiral Bevel Gears Based on Vector Transformation

    Gu, J. G., Xue, J., Xing, D. & Fang, Z., Sep 2018, Proceedings of 2018 International Computers, Signals and Systems Conference, ICOMSSC 2018. Institute of Electrical and Electronics Engineers Inc., p. 712-716 5 p. 8941769. (Proceedings of 2018 International Computers, Signals and Systems Conference, ICOMSSC 2018).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2014

    Analysis of power-split for the transmission system based on deformation compatibility

    Yang, X. F., Fang, Z. D., Zhang, Y. Z. & Han, Y. F., 2014, Machinery Electronics and Control Engineering III. p. 291-294 4 p. (Applied Mechanics and Materials; vol. 441).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Mechanism synthesis of a transformable wheel-legged robot

    Tian, H. B., Fang, Z. D. & Li, A. M., 2014, Machine Tool Technology, Mechatronics and Information Engineering. Wang, Z., Guo, L., Tan, J., Yang, D., Yang, D., Yang, K., Yang, D., Yang, D. & Yang, D. (eds.). Trans Tech Publications Ltd, p. 242-246 5 p. (Applied Mechanics and Materials; vol. 644-650).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Optimal speed synchronization control for clutchless AMT systems in electric vehicles with preview actions

    Zhu, X., Zhang, H., Xi, J., Wang, J. & Fang, Z., 2014, 2014 American Control Conference, ACC 2014. Institute of Electrical and Electronics Engineers Inc., p. 4611-4616 6 p. 6858849. (Proceedings of the American Control Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    34 Scopus citations

  • The influence caused by each assembly misalignment on the HGT hypoid gear's meshing performance

    Wang, X., Fang, Z. D. & Li, S. J., 2014, Mechanical, Electronic and Engineering Technologies, ICMEET 2014. Trans Tech Publications, p. 122-126 5 p. (Applied Mechanics and Materials; vol. 538).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2013

    Mathematical model of Klingelnberg cyclo-palloid hypoid gear

    Du, J. F., Fang, Z. D., Xu, M., Zhao, X. L. & Feng, Y. M., 2013, Energy Research and Power Engineering. p. 572-576 5 p. (Applied Mechanics and Materials; vol. 341-342).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Modeling of helical gear power tri-branching transmission based on loaded tooth contact analysis

    Yang, X. F., Fang, Z. D., Zhang, Y. Z. & Han, Y. F., 2013, Advanced Materials Design and Mechanics II. p. 543-546 4 p. (Applied Mechanics and Materials; vol. 372).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Multi-objective topology optimization for bevel gear and geometrical reconstruction

    Bian, X., Fang, Z., Qin, K., Lian, L. & Zhang, B., 2013, Advances in Mechatronics and Control Engineering. p. 139-142 4 p. (Applied Mechanics and Materials; vol. 278-280).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Optimal design of modified cylindrical gear based on minimum flash temperature of tooth surfaces

    Jiang, J. K., Fang, Z. D. & Xian-Long, P., 2013, Engineering Solutions for Manufacturing Processes. p. 573-577 5 p. (Advanced Materials Research; vol. 655-657).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Research on the ECAS system model and control strategy

    Zhang, X. J., Li, H. Y., Fang, Z. D., Wang, M. T., Pan, J. W. & Li, C., 2013, Mechanics and Mechatronics. p. 654-660 7 p. (Applied Mechanics and Materials; vol. 419).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The herringbone gear box modal analysis and experimental study

    Wang, F. & Fang, Z. D., 2013, Applied Mechanics, Materials and Mechanical Engineering. p. 328-331 4 p. (Applied Mechanics and Materials; vol. 387).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2012

    Analysis for obstacle negotiation capability of wheel-legged robot

    Tian, H., Fang, Z., Meng, F. & Yang, X., 2012, Manufacturing Science and Technology. p. 183-189 7 p. (Advanced Materials Research; vol. 383-390).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Finite element analysis of mechanical characteristics on the composite rubber suspension of heavy vehicle

    Pang, H., Li, H. Y., Fang, Z. D. & Zhu, X. Y., 2012, Frontiers of Manufacturing and Design Science II. p. 1702-1706 5 p. (Applied Mechanics and Materials; vol. 121-126).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Load tooth contact analysis for double-crowned face gear

    Peng, X., Fang, Z. & Jiang, J., 2012, Advances in Engineering Design and Optimization III. p. 517-520 4 p. (Applied Mechanics and Materials; vol. 201-202).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Mathematical model of spherical gears with helix traces

    Su, J. & Fang, Z., 2012, Material Science and Engineering Technology. p. 398-401 4 p. (Advanced Materials Research; vol. 462).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nonlinear dynamic analysis of helical gear considering meshing impact

    Wang, F., Fang, Z. & Li, S., 2012, Advances in Engineering Design and Optimization III. p. 135-138 4 p. (Applied Mechanics and Materials; vol. 201-202).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • Time-verying mesh stiffness of gear pair based on loaded tooth contact analysis

    Du, J., Fang, Z. & Dong, H., 2012, Proceedings - 2012 3rd International Conference on Digital Manufacturing and Automation, ICDMA 2012. p. 979-982 4 p. 6298679. (Proceedings - 2012 3rd International Conference on Digital Manufacturing and Automation, ICDMA 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations
  • 2011

    Advanced tooth surface modification for spiral bevel gears

    Su, J., Fang, Z. & Cai, X., 2011, Advances in Power Transmission Science and Technology. p. 148-151 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A method to analyze the power flow of helical gears power dual-branching transmission

    Wang, B., Fang, Z., Li, J. & Yang, X., 2011, 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings. p. 22-25 4 p. 5768467. (2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Analysis of load sharing behavior in herringbone gears power branching transmission system

    Yang, X., Fang, Z., Wang, B. & Du, J., 2011, Advances in Power Transmission Science and Technology. p. 305-308 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • A study on spiral bevel gear fault detection using artificial neural networks and wavelet transform

    Fu, B. & Fang, Z., 2011, Advances in Power Transmission Science and Technology. p. 214-217 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    5 Scopus citations

  • Modeling and Power Flow Analysis for Herringbone Gears Power Dual-Branching Transmission System

    Yang, X., Zhu, Y., Fang, Z. & Gu, J., 2011, Intelligent Computing and Information Science: International Conference, ICIIS 2011 Chongqing, China, January 8-9, 2011 Proceedings, Part II. Chen, R. (ed.). PART 2 ed. p. 7-15 9 p. (Communications in Computer and Information Science; vol. 135, no. PART 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Precise modeling of arc cylinder-gears with tooth root fillet

    Cui, Y., Fang, Z., Su, J. & Liu, Y., 2011, Advances in Power Transmission Science and Technology. p. 871-874 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Research on meshing characteristics for face gear with arcuate tooth

    Cai, X., Fang, Z. & Su, J., 2011, Advances in Power Transmission Science and Technology. p. 39-42 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Research on vibration reduction performance of holey straight bevel gear

    Xiaoyuan, Z., Zongde, F. & Wei, L., 2011, 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings. p. 4371-4374 4 p. 5768853. (2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Stiffness matching and ride comfort optimization of heavy vehicle's suspension based on ADAMS

    Pang, H., Li, H., Fang, Z. & Wang, J., 2011, Frontiers of Manufacturing and Design Science. p. 1734-1738 5 p. (Applied Mechanics and Materials; vol. 44-47).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations

  • Structural topology optimization for forced vibration problem using level set method

    Shu, L., Wang, M. Y., Fang, Z. & Ma, Z., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 633-642 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Study on ultrasonic lapping system of spiral bevel gear

    Yang, J., Wei, B., Deng, X. & Fang, Z., 2011, Advances in Power Transmission Science and Technology. p. 424-427 4 p. (Applied Mechanics and Materials; vol. 86).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2010

    A DSP-based integrated starter/generator controller for single-axle parallel hybrid powertrain

    Xinjie, J., Shengjin, L. & Zongde, F., 2010, ICSPS 2010 - Proceedings of the 2010 2nd International Conference on Signal Processing Systems. p. V2228-V2232 5555287. (ICSPS 2010 - Proceedings of the 2010 2nd International Conference on Signal Processing Systems; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Comparison experiment for two kinds of hypoid gear drives

    Yang, H., Wang, X. & Fang, Z., 2010, Information Technology for Manufacturing Systems. Trans Tech Publications Ltd, p. 1385-1390 6 p. (Applied Mechanics and Materials; vol. 20-23).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Manufacturing process for circular-arc curvilinear cylindrical gears with predesigned fourth order transmission error

    Su, J. & Fang, Z., 2010, Advances in Engineering Design and Optimization. p. 623-627 5 p. (Applied Mechanics and Materials; vol. 37-38).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • Research on machining face gears using a CNC hobbing machine

    Zhao, N., Guo, H., Fang, Z. & Gao, H., 2010, Manufacturing Science and Engineering I. p. 3761-3764 4 p. (Advanced Materials Research; vol. 97-101).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • Study on optimum meshing efficiency for spiral bevel gears in mixed elasto-hydrodynamic lubrication

    Gu, J., Fang, Z. & Shen, S., 2010, Advances in Engineering Design and Optimization. p. 1321-1326 6 p. (Applied Mechanics and Materials; vol. 37-38).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Test research for effects of the cab suspension system on heavy vehicle ride comfort

    Pang, H., Li, H., Fang, Z., Gu, Y. & Gao, C., 2010, 2010 2nd International Conference on Computational Intelligence and Natural Computing, CINC 2010. p. 113-116 4 p. 5643879. (2010 2nd International Conference on Computational Intelligence and Natural Computing, CINC 2010; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • The control strategy of electronic differential for EV with four in-wheel motors

    Zhou, Y., Li, S., Zhou, X. & Fang, Z., 2010, 2010 Chinese Control and Decision Conference, CCDC 2010. p. 4190-4195 6 p. 5498381. (2010 Chinese Control and Decision Conference, CCDC 2010).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    27 Scopus citations

  • The design and computerized simulation of high tooth contact ratio of face gear drive with helical pinion

    Fu, B., Fang, Z. & Shen, Y., 2010, Proceedings - 2010 International Conference on Digital Manufacturing and Automation, ICDMA 2010. p. 643-647 5 p. 5701489. (Proceedings - 2010 International Conference on Digital Manufacturing and Automation, ICDMA 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The optimum design of gear transmission based on MATLAB

    Yang, X., Li, J., Fang, Z. & Wang, C., 2010, 2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010. p. 925-928 4 p. 5458679. (2010 International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    3 Scopus citations

  • The research on generation of arc face-gears

    Cui, Y., Fang, Z., Su, J., Cai, X. & Wang, L., 2010, Advances in Engineering Design and Optimization. p. 1553-1557 5 p. (Applied Mechanics and Materials; vol. 37-38).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Topology-bundary optimization of coupled structural-acoustic systems

    Shu, L., Fang, Z. & Zhengdong, M., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. American Society of Mechanical Engineers (ASME), p. 471-478 8 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations
  • 2009

    Control strategy for ABS of Ev with independently controlled four in-wheel motors

    Zhou, Y., Li, S., Fang, Z. & Zhou, Q., 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications, ICIEA 2009. p. 2471-2476 6 p. 5138647. (2009 4th IEEE Conference on Industrial Electronics and Applications, ICIEA 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    12 Scopus citations

  • Experimental study on different ignition system matching different spark plug gap

    Gu, Y. & Zongde, F., 2009, Proceedings of the 2009 International Conference on Computational Intelligence and Natural Computing, CINC 2009. 1 ed. p. 305-308 4 p. 5231133. (Proceedings of the 2009 International Conference on Computational Intelligence and Natural Computing, CINC 2009; no. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    4 Scopus citations

  • Optimization design model research of double front axle steering mechanisms in dump trucks

    Gu, Y. & Fang, Z., 2009, Proceedings of the 2nd International Conference on Transportation Engineering, ICTE 2009. American Society of Civil Engineers (ASCE), p. 3827-3832 6 p. (Proceedings of the 2nd International Conference on Transportation Engineering, ICTE 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2008

    Application of modified geometry of face-gear drive with double crowned helical pinion

    Shen, Y. B., Fang, Z. D., Zhao, N., Guo, H. & Zeng, X. C., 2008, Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance. CSREA Press, p. 579-588 10 p. (Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    6 Scopus citations

  • Loaded tooth contact analysis of modified helical face gears

    Zhao, N., Guo, H., Fang, Z., Shen, Y. & Wei, B., 2008, Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach Based on Computational Tools. CSREA Press, p. 345-354 10 p. (Global Design to Gain a Competitive Edge: An Holistic and Collaborative Design Approach Based on Computational Tools).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations

  • Optimization design of flapping mechanism and wings for flapping-wing MAVs

    Liu, L., Fang, Z. & He, Z., 2008, Intelligent Robotics and Applications - First International Conference, ICIRA 2008, Proceedings. PART 1 ed. Springer Verlag, p. 245-255 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5314 LNAI, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    11 Scopus citations

  • Simplification rules and linear temporal inference of workflow models based on fuzzy-timing colored Petri nets

    Pang, H. & Fang, Z., 2008, Proceedings of the 2008 12th International Conference on Computer Supported Cooperative Work in Design, CSCWD. p. 677-682 6 p. 4537059. (Proceedings of the 2008 12th International Conference on Computer Supported Cooperative Work in Design, CSCWD; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • The theory and application study on optimal fuel economy shift schedule

    Niu, Q., Fang, Z., Wang, K. & Zhang, G., 2008, Proceedings of the 2008 International Symposium on Computational Intelligence and Design, ISCID 2008. IEEE Computer Society, p. 179-184 6 p. 4725485. (Proceedings of the 2008 International Symposium on Computational Intelligence and Design, ISCID 2008; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations
  • 2007

    An experimental investigation into the design of vehicle fuzzy active suspension

    Farong, K. & Zongde, F., 2007, Proceedings of the IEEE International Conference on Automation and Logistics, ICAL 2007. p. 959-963 5 p. 4338705. (Proceedings of the IEEE International Conference on Automation and Logistics, ICAL 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    16 Scopus citations

  • Design information reuse for free-form shape and the distributed design reuse system architecture

    Li, A. M., Fang, Z. D. & Zhang, G. S., 2007, Proceedings of the 2007 International Conference on Wavelet Analysis and Pattern Recognition, ICWAPR '07. Institute of Electrical and Electronics Engineers Inc., p. 1477-1482 6 p. 4421683. (Proceedings of the 2007 International Conference on Wavelet Analysis and Pattern Recognition, ICWAPR '07; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Free-form feature surface design based on wavelet multiresolution analysis

    Aimin, L., Zongde, F., Guosheng, Z. & Rui, Z., 2007, Proceedings of 2007 10th IEEE International Conference on Computer Aided Design and Computer Graphics, CAD/Graphics 2007. p. 529-532 4 p. 4407947. (Proceedings of 2007 10th IEEE International Conference on Computer Aided Design and Computer Graphics, CAD/Graphics 2007).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review