力学与土木建筑学院

2025

A comprehensive study on dynamic responses of the whole aero-engine system and design of variable stiffness brackets

Zhang, W., Lu, K., Zhang, Y., Chen, J., Fu, D., Yang, Y. & Fu, C., 4月 2025, 在: Aerospace Science and Technology. 159, 110010.

科研成果: 期刊稿件 › 文章 › 同行评审

Adaptive ensemble model-based approach for estimating failure probability function using global error measures with application in reliability optimization

Song, H., Lin, H., Zhou, C., Li, L. & Yue, Z., 15 6月 2025, 在: Engineering Structures. 333, 120166.

科研成果: 期刊稿件 › 文章 › 同行评审

Advancing the mechanical performance of chemically complex alloys through strategically engineered bamboo-inspired multi-stage heterostructures

Cui, Z., Si, D., Zhang, J., Gao, Q., Gong, J., Wang, X., Song, K., Han, X., Zhang, K., Mu, Y., Jia, Y., Şopu, D., Zhang, Z., Ramasamy, P., Qiao, J., Song, W., Wang, G., Zhang, L. & Eckert, J., 1 8月 2025, 在: Composites Part B: Engineering. 302, 112547.

科研成果: 期刊稿件 › 文章 › 同行评审

Aerodynamic and wake characteristics for full-scale and model-scale 5 MW wind turbines using data-driven modal decomposition

Zhang, X., Tao, M., Zhang, M., Zhu, R., Wang, S., Li, B., Liu, B. & Xie, Z., 15 2月 2025, 在: Ocean Engineering. 318, 120131.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

A hybrid single-loop approach combining the target beta-hypersphere sampling and active learning Kriging for reliability-based design optimization

Hu, H., Wang, P., Chang, H., Yang, R., Yang, W. & Li, L., 6月 2025, 在: Aerospace Science and Technology. 161, 110136.

科研成果: 期刊稿件 › 文章 › 同行评审

A multi-scale constitutive model for AlSi10Mg alloy fabricated via laser powder bed fusion

Lei, M., Aditya, R., Liu, L., See Wu, M., Wang, J., Zhou, K. & Yao, Y., 1 1月 2025, 在: International Journal of Solids and Structures. 306, 113111.

科研成果: 期刊稿件 › 文章 › 同行评审

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

Wang, Y. & Yao, Y., 1月 2025, 在: Acta Mechanica. 236, 1, 页码 241-257 17 页码, 111091.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

A new fully decoupled strategy for reliability optimization based on adaptive Kriging with improved efficient global optimization and weighted K-means clustering

Song, H., Lin, H., Zhou, C., Li, L. & Yue, Z., 15 3月 2025, 在: Mechanical Systems and Signal Processing. 227, 112402.

科研成果: 期刊稿件 › 文章 › 同行评审

Anomalous high-temperature oxidation behavior of SiC coatings on C_f/SiC Composites: Degradation mechanisms and microstructural evolution from 1200 °C to 1400 °C

Cai, X., Lin, H., Sun, Z., Zhang, L., Jiang, S., Meng, N., Wen, Z., Feng, T., Sun, S. & Yue, Z., 15 8月 2025, 在: Composites Part B: Engineering. 303, 112605.

科研成果: 期刊稿件 › 文章 › 同行评审

A non-probabilistic reliability-based design optimization method via dimensional decomposition-aided Chebyshev metamodel

Zhao, H., Fu, C., Zhang, Y., Wan, Z. & Lu, K., 10月 2025, 在: Reliability Engineering and System Safety. 262, 111208.

科研成果: 期刊稿件 › 文章 › 同行评审

A NURBS-based level set method for the manufacturing-oriented thermal buckling optimization of curvilinear fiber composite panels with cut-outs

Ding, H., Sun, R., Tian, H., Hu, Y., Zhang, X. & Xu, B., 15 3月 2025, 在: Computer Methods in Applied Mechanics and Engineering. 437, 117789.

科研成果: 期刊稿件 › 文章 › 同行评审

A random interval coupling-based active learning Kriging with meta-model importance sampling method for hybrid reliability analysis under small failure probability

Dong, S., Li, L., Yuan, T., Yu, X., Wang, P. & Jia, F., 1 6月 2025, 在: Computer Methods in Applied Mechanics and Engineering. 441, 117992.

科研成果: 期刊稿件 › 文章 › 同行评审

A trimmed-NURBS-based thermal buckling isogeometric analysis framework for the variable stiffness plate with complex cutouts

Ding, H., Qian, B., Hu, Y., Wang, C., Zhang, X., Sun, R. & Xu, B., 1月 2025, 在: Advances in Engineering Software. 199, 103803.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Bilateral wear analysis of crowned spline coupling subject to angular misalignment

Chen, Z., Dong, Q., Li, T., Xie, Z. & Zhao, B., 1 6月 2025, 在: Engineering Failure Analysis. 174, 109524.

科研成果: 期刊稿件 › 文章 › 同行评审

Bio-inspired structures for energy harvesting self-powered sensing and smart monitoring

Cui, Y., Luo, H., Yang, T., Qin, W. & Jing, X., 1 4月 2025, 在: Mechanical Systems and Signal Processing. 228, 112459.

科研成果: 期刊稿件 › 文献综述 › 同行评审

1 引用（Scopus）

Characterization and localization of fatigue damage in nickel-based superalloys using nonlinear ultrasonic harmonic method

Wang, J. J., Zhang, Y. M., Ren, H. R., Yang, Y. Q., Wen, Z. X. & Yue, Z. F., 4月 2025, 在: International Journal of Fatigue. 193, 108785.

科研成果: 期刊稿件 › 文章 › 同行评审

Characterization of Electromigration-induced degradation in Micro Bumps Via On-Chip Embedded Temperature Sensors Under High Current Density

Pu, Z., Wang, Y., Cao, L., Qiao, J. & Sun, X., 2025, (已接受/待刊) 在: IEEE Transactions on Components, Packaging and Manufacturing Technology. 0b00006493fc5d3c.

科研成果: 期刊稿件 › 文章 › 同行评审

Coatings for Advanced Devices

Long, X., 2月 2025, 在: Coatings. 15, 2, 219.

科研成果: 期刊稿件 › 社论

开放访问

1 引用（Scopus）

Comprehensive analysis on the regulation and optimization of thrust bearing with pad cavity

Xie, Z., Sun, Y., Yang, M., Han, R., Gao, W., Zhao, B., Dong, Q., Zhang, X. & Xu, F., 1 3月 2025, 在: Physics of Fluids. 37, 3, 033117.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Compressive stress-strain relationship of limestone calcined clay cement-based UHPC matrix

Fan, K., Du, P. & Yao, Y., 7月 2025, 在: Case Studies in Construction Materials. 22, e04274.

科研成果: 期刊稿件 › 文章 › 同行评审

开放访问

1 引用（Scopus）

Constructing a new methodology for teaching internal friction of amorphous solids: models, experiments and simulations

Qiao, J. C. & Pineda, E., 31 5月 2025, 在: European Journal of Physics. 46, 3, 035501.

科研成果: 期刊稿件 › 文章 › 同行评审

Correlation Analysis Between Porosity and Mechanical Properties of Porous Sintered Nanosilver Based on Indentation Response

Long, X., Ding, X., Mou, T., Zhang, F., Dong, R., Zhu, J., Shen, Z., Iyela, P. M., Yan, W., Liu, J., Geng, X. & Chang, C., 3月 2025, 在: Journal of Materials Engineering and Performance. 34, 6, 页码 4564-4572 9 页码, 109137.

科研成果: 期刊稿件 › 文章 › 同行评审

Corrigendum to “Thermophysical Properties of Zr₆₅Cu_17.5Ni₁₀Al_7.5 Bulk Metallic Glass” [Journal of Non-Crystalline Solids 652 (2025) 123400](S002230932500016X)(10.1016/j.jnoncrysol.2025.123400)

Sergiienko, R. A., Sharma, A., Shcheretskyi, O. A., Zadorozhnyy, V. Y., Shcheretskyi, V. O., Myslyvchenko, O. M., Verkhovliuk, A. M., Stepashkin, A. A. & Qiao, J. C., 15 5月 2025, 在: Journal of Non-Crystalline Solids. 656, 123477.

科研成果: 期刊稿件 › 评论/辩论

Cyclic Mechanical Behavior, Damage-Coupled Constitutive Model, and Remaining Life Prediction Model of QCr0.8 at High Temperature

Wang, J., Yu, J., Wen, Z., Xu, X., Shi, Y. & Yue, Z., 5月 2025, 在: Fatigue and Fracture of Engineering Materials and Structures. 48, 5, 页码 2176-2190 15 页码

科研成果: 期刊稿件 › 文章 › 同行评审

Cyclic Mechanical Behavior, Damage-Coupled Constitutive Model, and Remaining Life Prediction Model of QCr0.8 at High Temperature

Wang, J., Yu, J., Wen, Z., Xu, X., Shi, Y. & Yue, Z., 2025, (已接受/待刊) 在: Fatigue and Fracture of Engineering Materials and Structures.

科研成果: 期刊稿件 › 文章 › 同行评审

Deciphering the α relaxation and the anelastic-to-plastic transition in the deep glassy state

Hao, Q., Xing, G., Pineda, E., Fusco, C., Chazeau, L., Pelletier, J. M., Wang, Y., Yang, Y. & Qiao, J., 3月 2025, 在: Science China: Physics, Mechanics and Astronomy. 68, 3, 234611.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Deep Neural Networks and Proper Orthogonal Decomposition-Based Parameterized Reduced-Order Model and its Application in Transonic Axial-Flow Compressor Blade

Tan, C., Gao, H., Li, L. & Li, H., 2025, (已接受/待刊) 在: Flow, Turbulence and Combustion.

科研成果: 期刊稿件 › 文章 › 同行评审

Design and aerodynamic analysis of a morphing joined-wing aircraft with transonic flight capability

Guo, X., Wang, Z., Lu, K. & Cao, D., 4月 2025, 在: Aerospace Science and Technology. 159, 109966.

科研成果: 期刊稿件 › 文章 › 同行评审

Dynamic research on nonlinear vibration mechanism and control method for marine parallel propulsion system

Xu, J., Hou, Y., Tao, Y., Liu, X., Xie, Z., Yang, Y., Ta, N. & Rao, Z., 15 4月 2025, 在: Ocean Engineering. 323, 120556.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Effect investigation of interaction between upstream wake and film cooling on the flowfield dynamics of high-pressure turbine blade

Tan, C., Gao, H., Du, H., Yang, M., Yang, G., Zhao, D. & Li, L., 1 10月 2025, 在: Applied Thermal Engineering. 276, 127008.

科研成果: 期刊稿件 › 文章 › 同行评审

Effect of creep behavior on the Ni-based single crystal blade structure under abrupt loading conditions

Yang, Y., Wen, Z., Pei, H., Shi, L., Xiao, J. & Yue, Z., 7月 2025, 在: Thin-Walled Structures. 212, 113221.

科研成果: 期刊稿件 › 文章 › 同行评审

Effect of curvature radius on leading edge cooling performance of double wall turbine blade

Tang, Z., Li, L., Li, H., Zhang, Z., Bao, Y. & Xie, G., 4月 2025, 在: International Journal of Thermal Sciences. 210, 109621.

科研成果: 期刊稿件 › 文章 › 同行评审

Effect of thickness on fatigue crack initiation of nickel-based single crystal superalloy micro notched specimens at 850 °C

Wang, J., Wu, W., Xu, X., Wen, Z. & Yue, Z., 13 5月 2025, 在: Engineering Fracture Mechanics. 320, 111054.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Energy-state-dependent mechanical and structural heterogeneity in metallic glasses probed by nanoindentation

Fu, S. Q., Duan, Y. J., Tao, K., Song, K. K., Wang, Y. J., Pineda, E., He, Q. F., Zhang, Z. Q., Yang, Y. & Qiao, J. C., 1 8月 2025, 在: International Journal of Mechanical Sciences. 299, 110427.

科研成果: 期刊稿件 › 文章 › 同行评审

Enhanced tensile properties of 3D printed soft–hard composites due to Poisson's ratio mismatch: Experimental and numerical study

Sun, P., Yang, W., Zhang, Y., Zhang, B., Fan, Z. & Li, L., 15 6月 2025, 在: Composites Part B: Engineering. 299, 112413.

科研成果: 期刊稿件 › 文章 › 同行评审

Evaluation of multi-mode shared combustor with different flame holder designs for an innovative turbo-ramjet combined cycle engine

Zhang, K., Yu, X., Zhang, D., Guo, J. & Qin, F., 15 5月 2025, 在: Energy. 323, 135875.

科研成果: 期刊稿件 › 文章 › 同行评审

Experimental and damage-coupled crystal plasticity constitutive study for solder ball under shear tests

Liu, L., Yu, H., Li, Y., He, Z., Huang, S., Cai, Z., He, X. & Yao, Y., 11 3月 2025, 在: Engineering Fracture Mechanics. 316, 110898.

科研成果: 期刊稿件 › 文章 › 同行评审

Exploring porosity effects of on mechanical behavior of sintered nanosilver for double-sided cooling packaging of high-power devices: a multiscale modeling

Long, X., Zhao, X., Chong, K., Su, Y., Siow, K. S., Wang, Z., Jia, F. & Wan, X., 2 1月 2025, 在: Soldering and Surface Mount Technology. 37, 1, 页码 37-49 13 页码

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Fatigue fracture mechanism and life prediction of nickel-based single crystal superalloy with film cooling holes considering initial manufacturing damage

Li, F., Wen, Z., Luo, L., Ren, X., Li, Y., Pei, H. & Yue, Z., 8月 2025, 在: International Journal of Fatigue. 197, 108902.

科研成果: 期刊稿件 › 文章 › 同行评审

6 引用（Scopus）

Fatigue life prediction of film-cooling Hole specimens with initial damage

Li, F., Wen, Z., Luo, L., Ren, X. & Yue, Z., 1 1月 2025, 在: International Journal of Mechanical Sciences. 285, 109789.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Fatigue notch strengthening effect of nickel-based single crystal superalloys under different stress ratios

Wang, J., Xu, X., Lu, H., Zhang, L., Lian, Y., Wen, Z. & Yue, Z., 1 1月 2025, 在: European Journal of Mechanics, A/Solids. 109, 105471.

科研成果: 期刊稿件 › 文章 › 同行评审

4 引用（Scopus）

Fire resistance performance of clinker-free cementitious materials produced from phosphorus slag, calcium carbide slag, desulfurization gypsum, and metakaolin

Fan, K., Cui, S. & Yao, Y., 14 3月 2025, 在: Construction and Building Materials. 467, 140400.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

First Principles Study on Effect of Al-O Element Aggregation on Oxidation of a Ni-based Single Crystal Superalloy

Pei, H., Xiao, J., Li, W., Yu, H., Wen, Z. & Yue, Z., 2025, 在: Journal of the Chinese Society of Corrosion and Protection. 45, 1, 页码 173-181 9 页码

科研成果: 期刊稿件 › 文章 › 同行评审

Fluid-structure interaction analysis of a novel water-lubricated bearing with particle-dynamic effect: Theory and experiment

Xie, Z., Tian, Y., Liu, S., Ma, W., Gao, W., Du, P. & Zhao, B., 4月 2025, 在: Tribology International. 204, 110474.

科研成果: 期刊稿件 › 文章 › 同行评审

13 引用（Scopus）

Fractal analysis of limestone damage under successive impact by shield disc cutters

Zou, B., Yin, J., Zhang, W. & Long, X., 12 6月 2025, 在: Engineering Fracture Mechanics. 322, 111163.

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

Global–local collaborative optimization method based on parametric sensitivity analysis and application to optimization of compressor blade

Bao, Y., Li, H., Zhao, Y., Li, L., Zhang, Z. & Tang, Z., 1月 2025, 在: Structural and Multidisciplinary Optimization. 68, 1, 19.

科研成果: 期刊稿件 › 文章 › 同行评审

Harnessing vibration energy by inverted fork harvester with electromagnetic and piezoelectric effects

He, Q., Qin, W., Shang, M., Wang, H. & Pan, J., 15 4月 2025, 在: Mechanical Systems and Signal Processing. 229, 112549.

科研成果: 期刊稿件 › 文章 › 同行评审

Harvesting both wind energy and vibration energy by a zigzag structure with hybrid magnetic and piezoelectric effects

Pan, J., Zhang, X., Cheng, Y., Zhang, J. & Qin, W., 1 1月 2025, 在: Mechanical Systems and Signal Processing. 224, 112066.

科研成果: 期刊稿件 › 文章 › 同行评审

2 引用（Scopus）

Heterogeneity-induced thermal mismatch in BGA interconnects: Insights from mechanical-thermal finite element modeling

Chu, L., Shi, J. & Long, X., 5月 2025, 在: Microelectronics Reliability. 168, 115703.

科研成果: 期刊稿件 › 文章 › 同行评审

Hierarchical design of self-standing FeNi-based metallic glass by in-situ surface amorphous oxide construction for durable and efficient oxygen evolution

Liang, S. X., Sun, L., Loza, K., Zerebecki, S., Jia, Z., Yang, Y., Qiao, J., Zhang, L. C. & Reichenberger, S., 15 1月 2025, 在: Applied Surface Science. 679, 161269.

科研成果: 期刊稿件 › 文章 › 同行评审

3 引用（Scopus）

力学与土木建筑学院

科研成果

搜索结果