Find Research outputs

热加工与快速凝固对 Ni-Co-Al 三元合金微观组织演变的影响

Translated title of the contribution: Effects of thermal processing and rapid solidification on the microstructural evolution in Ni-Co-Al ternary alloysLi, B., Zhou, F., Cui, Y., Li, M., Zhou, Y. & Wang, J., Jul 2024, In: Jinshu Rechuli/Heat Treatment of Metals. 49, 7, p. 231-240 10 p.

Research output: Contribution to journal › Article › peer-review

热力耦合作用下钛合金动态相变行为研究进展

Translated title of the contribution: Research progress of dynamic phase transformation behavior of titanium alloy under thermo-mechanical coupling processFan, J., Lai, M., Tang, B., Kou, H. & Li, J., 1 Jun 2020, In: Hangkong Cailiao Xuebao/Journal of Aeronautical Materials. 40, 3, p. 25-44 20 p.

Research output: Contribution to journal › Review article › peer-review

5 Scopus citations

热力耦合下不同加筋壁板稳定性分析

Translated title of the contribution: Stability Analysis of Different Stiffened Plates in Thermal-Mechanical Coupling EnvironmentsMa, L., Ma, Y. & Qin, Q., 1 Feb 2020, In: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University. 38, 1, p. 40-47 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Scopus citations

热伴流中甲烷射流的自燃特性研究

Translated title of the contribution: Auto-Ignition Behavior in Methane Jet-in-Hot-Coflow FlamesZou, Q., Song, E., Lei, Q. & Fan, W., 2023, In: Ranshao Kexue Yu Jishu/Journal of Combustion Science and Technology. 29, 2, p. 143-149 7 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

点火方式对空桶型旋转爆震燃烧室起爆特性的影响

Translated title of the contribution: Effects of ignition on initiation characteristics of hollow rotating detonation combustorZhao, M., Wang, K., Wang, Z., Zhu, Y., Yu, X. & Fan, W., 25 Jan 2022, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 43, 1, 124870.

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

点火具装药状态对其工作过程能量释放特性的影响规律

Translated title of the contribution: Influence of the Charge State of the Igniter on the its Energy Release Characteristics during Its Working ProcessTian, X. T., Li, Y. X., Xiao, B., Wang, S. Z., Ma, Y. F., Liu, P. I. & Yan, Q. L., 25 Oct 2023, In: Hanneng Cailiao/Chinese Journal of Energetic Materials. 31, 10, p. 1013-1025 13 p.

Research output: Contribution to journal › Article › peer-review

点火位置对两相旋转爆震波起爆特性影响的实验研究

Translated title of the contribution: Experimental Study on Effects of Ignition Positions on Initiation Characteristics of Two-Phase Rotating Detonation WavesZhao, M. H., Wang, K., Wang, Z. C., Jiao, Z. T. & Fan, W., Apr 2023, In: Tuijin Jishu/Journal of Propulsion Technology. 44, 4, 2202046.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

点渲染方式对量化点云主观质量的影响及算法优化

Translated title of the contribution: Impact of Point Rendering Methods on the Subjective Quality of Quantization Point Clouds and Algorithm OptimizationChen, Z., Yin, Y., Feng, Y. & Wan, S., Apr 2024, In: Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University. 58, 4, p. 32-40 9 p.

Research output: Contribution to journal › Article › peer-review

炭素の固溶がチタン積層造形合金の結晶組織形成に及ぼす影響

Translated title of the contribution: Carbon Solid Solution Effect on Microstructures of Laser Powder Bed Fusion Prepared Ti AlloysKariya, S., Ichikawa, E., Ammarueda, I., Umeda, J., Chen, B., Bahador, A. & Kondoh, K., Oct 2024, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 71, 10, p. 517-523 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

火箭基组合循环发动机热结构技术研究进展

Translated title of the contribution: Thermal structure technology development of rocket based combined cycle engineQin, F., Zhao, Z., He, G., Jing, T., Sun, X. & Wei, X., 15 Jun 2024, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 45, 11, 529572.

Research output: Contribution to journal › Review article › peer-review

火箭冲压组合发动机亚燃模态流道匹配特性分析

Translated title of the contribution: Analysis on Matching Relationship in Full Flowpath of Rocket Based Combined Cycle Engine at Ramjet ModeYan, D. K., He, G. Q., Qin, F., Shi, L. & Wang, Y. J., 1 Jul 2018, In: Tuijin Jishu/Journal of Propulsion Technology. 39, 7, p. 1464-1471 8 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

火箭冲压组合动力研究进展

Translated title of the contribution: Research Progress of Rocket Based Combined Cycle EnginesWang, Y. J., He, G. Q., Qin, F., Wei, X. G. & Zhang, D., 30 Oct 2019, In: Yuhang Xuebao/Journal of Astronautics. 40, 10, p. 1125-1133 9 p.

Research output: Contribution to journal › Review article › peer-review

14 Scopus citations

火电机组锅炉受热面合金烟气腐蚀与应力协同作用失效行为研究进展

Translated title of the contribution: Research progress in failure behavior of alloys for hot-section components in thermal power plant boilers under synergism of fireside corrosion and stressYang, X., Xu, Y., Huang, J., Dang, Y., Lu, J. & Li, W., 20 May 2022, In: Cailiao Gongcheng/Journal of Materials Engineering. 50, 5, p. 100-111 12 p.

Research output: Contribution to journal › Review article › peer-review

3 Scopus citations

火星固体上升器最优推力条件及制导方法

Translated title of the contribution: Optimal thrust conditions and guidance for Mars solid ascent vehiclesZhang, Q., Yang, Y., Tang, S., Yue, X. & Xu, Z., 15 Sep 2023, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 44, 17, 328155.

Research output: Contribution to journal › Article › peer-review

激波主导流动下壁板的热气动弹性稳定性理论分析

Translated title of the contribution: Aeroelastic Stability Analysis of Heated Flexible Panel in Shock-Dominated FlowsYe, L. & Ye, Z., 18 Mar 2018, In: Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics. 50, 2, p. 221-232 12 p.

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

激光选区熔化成形高强钛合金研究现状及展望

Translated title of the contribution: Research Status and Prospects of High-Strength Titanium Alloys Fabricated by Selective Laser MeltingMa, Y., Fan, J., Tang, L., Zhai, H., Zhang, Z., Chen, B., Wang, J., Tang, B., Kou, H. & Li, J., Jan 2025, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 54, 1, p. 280-292 13 p.

Research output: Contribution to journal › Review article › peer-review

激光选区熔化 Ti6Al4V 合金的工艺参数优化

Translated title of the contribution: Process parameters optimization of Ti6Al4V fabricated by selective laser meltingFeng, E. H., Wang, X. Q., Han, X., Zhou, Z. W., Kang, N., Wang, Q. Z., Zhao, C. L. & Lin, X., Dec 2022, In: Fenmo Yejin Jishu/Powder Metallurgy Technology. 40, 6, p. 555-563 9 p.

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

激光选区熔化 Al-Si 合金组织特征及腐蚀行为研究进展

Translated title of the contribution: Research Progress on Microstructure and Corrosion Behavior of Selective Laser Melted Al-Si AlloysGuo, L., Wang, W., Yang, H. & Liu, W., Mar 2024, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 53, 3, p. 870-881 12 p.

Research output: Contribution to journal › Article › peer-review

激光诱导击穿光谱技术识别航空合金牌号

Translated title of the contribution: Recognition of aerial alloy grades by laser-induced breakdown spectroscopyFeng, Z. Q., Zhang, D. C., Cui, M. C., Yang, R. Q., Ding, J. & Zhu, J. F., Dec 2020, In: Yejin Fenxi/Metallurgical Analysis. 40, 12, p. 99-104 6 p.

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

激光立体成形TC4钛合金的热-力场演化

Translated title of the contribution: Thermo-stress Field Evolution of TC4 Titanium Alloy by LSFLu, X., Ma, L., Lin, X. & Zheng, Y., 25 May 2020, In: Zhongguo Jixie Gongcheng/China Mechanical Engineering. 31, 10, p. 1246-1252 7 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

激光立体成形Inconel 718镍基高温合金δ相析出规律

Translated title of the contribution: δ Phase Precipitation of Inconel 718 Ni-Based Superalloy Fabricated by Laser Solid FormingLiu, F., Lü, F., Ren, H., Wang, X. & Lin, X., 10 Dec 2018, In: Zhongguo Jiguang/Chinese Journal of Lasers. 45, 12, 1202009.

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

激光稳频技术在大气探测激光雷达中的应用研究进展

Translated title of the contribution: Review of Laser Frequency Stabilization Technology in Atmospheric Detection LidarHuang, C., Zhang, S. Z., Wang, J. & Chang, J. H., Feb 2023, In: Jiliang Xuebao/Acta Metrologica Sinica. 44, 2, p. 186-194 9 p.

Research output: Contribution to journal › Review article › peer-review

2 Scopus citations

激光熔覆修复 GH4169 合金各向异性拉伸性能

Translated title of the contribution: Anisotropic tensile properties of GH4169 alloy repaired by laser direct energy depositionFan, Z., Yang, W., Zeng, Y., Zhao, Z. & Li, L., 25 Apr 2024, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 45, 8, 429129.

Research output: Contribution to journal › Article › peer-review

激光熔覆 WC 增强金属基涂层的研究进展

Translated title of the contribution: Progress in Laser Cladding of Tungsten Carbide Reinforced Metal-based CoatingsLi, Z., Zeng, Y., Xu, M. & Wang, J., Dec 2024, In: Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous Alloys. 44, 12, p. 1697-1705 9 p.

Research output: Contribution to journal › Article › peer-review

激光武器发射转塔尺寸对飞机作战效能的影响

Translated title of the contribution: Effect of Laser Weapon Turret Size on Aircraft Combat EffectivenessYun, Q., Song, B. & Pei, Y., Dec 2020, In: Advances in Aeronautical Science and Engineering. 11, 6, p. 819-826 8 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

激光无线能量传输下阵列电池优化输出特性研究

Translated title of the contribution: RESEARCH ON OPTIMIZED OUTPUT CHARACTERISTICS OF PHOTOVOLTAIC CELL ARRAY UNDER LASER WIRELESS POWER TRANSMISSIONMeng, X., Zhang, P., Hou, Y. & Liu, C., Feb 2025, In: Taiyangneng Xuebao/Acta Energiae Solaris Sinica. 46, 2, p. 367-373 7 p.

Research output: Contribution to journal › Article › peer-review

激光强化后7050凹槽铝板的残余应力分布规律研究

Translated title of the contribution: Study on Residual Stress Distribution of 7050 Aluminum Sheet with Groove after Laser Shock PeeningDu, Y., Ma, Y., Gou, L., Guo, C., Li, B. & Li, G., 1 Aug 2019, In: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University. 37, 4, p. 643-649 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

激光定向能量沉积 Inconel 718 合金高频窄脉冲电化学后处理行为研究

Translated title of the contribution: Study on High-Frequency Narrow Pulse Electrochemical Post-Processing Behavior of Inconel 718 Alloy by Laser Directed Energy DepositionGeng, J., Wu, L., Guo, P., Wang, H., Lin, X., Zhang, Y., Yang, G. & Huang, W., 25 May 2024, In: Zhongguo Jiguang/Chinese Journal of Lasers. 51, 10, 1002318.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Scopus citations

激光多次熔凝Zr₅₅Cu₃₀Al₁₀Ni₅非晶合金的晶化形态与演化机理

Translated title of the contribution: Crystallization Morphology and Evolution Mechanism of Laser Multiple Remelting of Zr₅₅Cu₃₀Al₁₀Ni₅ Metallic GlassYang, G., Lin, X. & Lu, X., 11 Dec 2019, In: Jinshu Xuebao/Acta Metallurgica Sinica. 55, 12, p. 1544-1550 7 p.

Research output: Contribution to journal › Article › peer-review

激光增材制造超高温氧化物共晶陶瓷研究进展

Translated title of the contribution: Research Progress on Ultrahigh Temperature Oxide Eutectic Ceramics by Laser Additive ManufacturingLiu, H., Su, H., Shen, Z., Jiang, H., Zhao, D., Liu, Y., Zhang, J., Liu, L. & Fu, H., Mar 2022, In: Wuji Cailiao Xuebao/Journal of Inorganic Materials. 37, 3, p. 255-266 12 p.

Research output: Contribution to journal › Review article › peer-review

Open Access

8 Scopus citations

激光增材制造多孔 GH4169 高温合金孔结构与性能研究

Translated title of the contribution: Pore structure and performance of porous GH4169 superalloys preparedby laser additive manufacturingLiang, J., Bai, X., Xu, J., Zhang, L., Wu, W. & Wang, J., Aug 2023, In: Fenmo Yejin Jishu/Powder Metallurgy Technology. 41, 4, p. 356-362+371

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

激光增材制造Ti6Al4V-Inconel718功能梯度材料的成分变化和微观结构演变

Translated title of the contribution: Compositional Changes and Microstructure Evolution of Ti6Al4V-Inconel718 Functionally Graded Materials by Laser Additive ManufacturingHuang, J., Sun, Z., Chang, H., Chang, L., Xing, F. & Zhou, L., 1 Aug 2020, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 49, 8, p. 2813-2819 7 p.

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

激光增材制造Nb合金化GH4169合金组织分析

Translated title of the contribution: Microstructure of Nb Alloyed GH4169 Superalloy Prepared by Laser Additive ManufacturingRen, H., Liu, F., Lin, X. & Chen, J., 1 Oct 2019, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 48, 10, p. 3289-3296 8 p.

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

激光冲击对Ti834合金残余应力及显微组织的影响

Translated title of the contribution: Effect of Laser Shock Processing on Residual Stress and Microstructure of Ti834 Titanium AlloyZan, Y., Jia, W., Zhao, H., Mao, X., Fan, J. & Zhou, L., 1 Nov 2019, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 48, 11, p. 3535-3540 6 p.

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

激光冲击Ti834合金强化层显微组织演变

Translated title of the contribution: Microstructure Evolution of Ti834 Alloy Subjected to Laser Shock Processing in Strengthening LayerZan, Y., Jia, W., Zhao, H., Fan, J., Mao, X. & Zhou, L., 1 Jan 2020, In: Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 49, 1, p. 343-348 6 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

潜航员认知效能驱动的作业舒适度评价方法

Translated title of the contribution: Evaluation method for operating comfort based on cognitive efficiency of oceanautsZhu, M., Chen, D., Ye, C. & Wang, J., 30 Jun 2022, In: Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology. 54, 6, p. 1-11 11 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

潜射航行体肩部通气流体动力特性数值研究

Translated title of the contribution: Numerical investigation on fluid dynamic characteristics around shoulder ventilation of submarine-launched vehicleGao, S., Shi, Y. & Pan, G., Jun 2021, In: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University. 39, 3, p. 463-470 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

8 Scopus citations

潜伏式武器水下减速着陆运动仿真

Translated title of the contribution: Simulation on Underwater Landing Motion of Latent WeaponLian, Y., Wang, X. & Song, B., 1 Sep 2019, In: Dandao Xuebao/Journal of Ballistics. 31, 3, p. 79-85 7 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

满足增益相位裕度的自动驾驶仪结构化H_∞综合

Translated title of the contribution: Autopilot Structured H_∞ Synthesis for Satisfying Gain and Phase Margin ConstraintsMa, X., Yan, J., Fu, W. & Chen, K., 1 Apr 2019, In: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University. 37, 2, p. 211-217 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

滚筒催化红外,热风联合干燥核桃的贮藏特性

Translated title of the contribution: Storage properties of walnuts dried by drum catalytic infrared-hot airQu, W. J., Fan, W., Ma, H. L., Shi, J. L., Jiang, Q. H. & Pan, Z. L., Jun 2021, In: Food and Machinery. 37, 6, p. 168-173 and 240

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

滚压强化表面状态特征的疲劳演化及抗疲劳机制研究进展

Translated title of the contribution: Fatigue evolution and anti-fatigue mechanism of surface characteristics induced by deep rolling: A reviewHan, K., Zhang, D., Yao, C., Tan, L. & Zhou, Z., 25 Oct 2021, In: Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica. 42, 10, 524302.

Research output: Contribution to journal › Review article › peer-review

4 Scopus citations

滚动轴承游隙振荡的试验研究

Translated title of the contribution: Experimental research on clearance oscillation phenomenon of rolling bearingsLiu, Z., Liao, M., Cao, M., Deng, W., Zheng, K., Yang, H. & Zhao, Y., 1 Oct 2022, In: Zhendong yu Chongji/Journal of Vibration and Shock. 41, 20, p. 100-111 12 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

滚动轴承波纹度对齿轮动态传递误差的影响

Translated title of the contribution: Influence of Rolling Bearing Waviness on Gear Dynamic Transmission ErrorLiu, J., Li, J., Zhang, L., Ran, Z. & Zhang, X., Feb 2024, In: Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis. 44, 1, p. 142-146 5 p.

Research output: Contribution to journal › Article › peer-review

滑油射流冲击旋转壁面的流动换热数值模拟研究

Translated title of the contribution: Numerical Study of Flow and Heat Transfer Characteristics of Oil Jet Impingement on Rotating WallLi, Y. J., Xu, W. P., Liu, Z. X., Lyu, Y. G. & Ren, S. X., Jan 2022, In: Tuijin Jishu/Journal of Propulsion Technology. 43, 1, p. 240-247 8 p.

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

溶液旋涂法制备 Bi_xY_3–xFe₅O₁₂ 薄膜的自旋输运特性

Translated title of the contribution: Spin transport properties of Bi_xY_3–xFe₅O₁₂ thin films prepared by spin coatingTian, Y. Y., Wang, S. H., Luo, D. B., Wei, X. Y. & Jin, K. X., 5 Jan 2023, In: Wuli Xuebao/Acta Physica Sinica. 72, 1, 017201.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

源致内波引起的声场扰动及其检测方法

Translated title of the contribution: Acoustic field fluctuation caused by source-generated internal waves and its detection methodHe, Z. Y., Lei, B. & Yang, Y. X., 2023, In: Wuli Xuebao/Acta Physica Sinica. 72, 14, 144301.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Scopus citations

湿热环境对双搭接复合材料接头剪切性能影响

Translated title of the contribution: Hygrothermal aging effects on double lap shear joints of composite laminatesGao, X., Zang, Y., Xu, F., Zhang, X., Feng, W., Cheng, W. & Jia, Y., 15 Oct 2021, In: Yingyong Lixue Xuebao/Chinese Journal of Applied Mechanics. 38, 5, p. 2042-2048 7 p.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

湿热环境下纤维增强树脂基复合材料疲劳性能研究进展

Translated title of the contribution: Fatigue performance of fiber reinforced polymer composites under hygrothermal environment-A reviewDu, Y. & Ma, Y., Feb 2022, In: Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica. 39, 2, p. 431-445 15 p.

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

湿热环境下碳纤维环氧树脂复合材料拉伸性能研究

Translated title of the contribution: Effect of hygrothermal environment on tensile properties of carbon fiber epoxy resin compositesDu, Y. & Ma, Y., Feb 2022, In: Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University. 40, 1, p. 33-39 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Scopus citations

温間圧延加工を施した超急冷凝固 Ti-Si 粉末合金の結晶組織形成と強化機構

Translated title of the contribution: Microstructures Formation and Strengthening Mechanism of Ultra-Rapidly Solidified Powder Metallurgy Ti-Si Alloys via Hot Rolling ProcessKariya, S., Hayashi, Y., Issariyapat, A., Umeda, J., Moon, S. K., Chen, B., Li, S. & Kondoh, K., Oct 2024, In: Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 71, 10, p. 499-509 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Filters for Research output

Search results