School of Materials Sience and Engineering

2024

Effect of secondary orientation on the microstructures in thin-walled castings of nickel-based single-crystal superalloys

Xu, H., Huang, T., Zhang, C., Zhang, J. & Liu, L., 2024, In: Journal of Physics: Conference Series. 2686, 1, 012002.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Long wave instability of aircraft wake vortex under shear crosswind

Xu, Z., Li, D., Cai, J. & Han, J., 2024, In: ICAS Proceedings.

Research output: Contribution to journal › Conference article › peer-review

MEASUREMENTS OF T-S WAVES DUE TO ACOUSTIC DISTURBANCES IN EXPERIMENTS

Cao, Z., Li, P. & Li, D., 2024, In: ICAS Proceedings.

Research output: Contribution to journal › Conference article › peer-review

Research on efficient active T-S wave generation method in boundary layer

Li, P., Cao, Z. & Li, D., 2024, In: ICAS Proceedings.

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Study of the scavenge pump performance for two-phase flow in an aircraft engine lubrication system

Wu, N., Hu, J. P., Lyu, Y. G., Wang, J., Tan, Y. & Liu, Z. X., 2024, In: ICAS Proceedings.

Research output: Contribution to journal › Conference article › peer-review

2021

Development of processing maps for DC cast 7065 aluminum alloy

He, K., Tan, Z., Zheng, X., Zhang, X., Chen, B. & Zhou, K., 12 Apr 2021, In: Journal of Physics: Conference Series. 1865, 3, 032060.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Flow Stress Behavior and Microstructural Evolution of DC Cast 7065 Aluminum Alloy during Hot Compression Deformation

He, K., Tan, Z., Zheng, X., Zhang, X., Chen, B. & Zhou, K., 28 Apr 2021, In: Journal of Physics: Conference Series. 1885, 3, 032067.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Numerical simulation of energy distribution of turbulent vortices in atmosphere effects on aircraft wake vortices

Zhou, J., Li, D., Zhang, Z. & Pan, W., 4 Mar 2021, In: Journal of Physics: Conference Series. 1828, 1, 012167.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Scopus citations

Simulation of Tensile Deformation Behavior of PM-SiC_p/2014Al Composite Based on RVE

Yang, C., Wang, Y., Fan, J., Wu, Y., Jiao, H. & Li, F., 12 Apr 2021, In: IOP Conference Series: Earth and Environmental Science. 719, 2, 022096.

Research output: Contribution to journal › Conference article › peer-review

Open Access

The influence of grid scale on the tail vortex capture of aircraft

Zhang, Z., Li, D. & Zhou, J., 4 Mar 2021, In: Journal of Physics: Conference Series. 1828, 1, 012173.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2020

An Acoustic Discrimination Method for Impact Load Based on Artificial Neural Network

Wang, Z., Ma, L., Zhan, Q., Li, Q. & Li, F., 24 Mar 2020, In: IOP Conference Series: Earth and Environmental Science. 455, 1, 012032.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Exploring the influence of pre/post-aging on springback in Al-Mg-Si alloy tube bending

Ma, J., Ha, T., Blindheim, J., Welo, T., Ringen, G. & Li, H., 2020, In: Procedia Manufacturing. 47, p. 774-780 7 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

10 Scopus citations

Preparation and characterization of CdZnTe particle detectors

Bao, L., Zha, G., Li, J. & Jie, W., 4 Dec 2020, In: Journal of Physics: Conference Series. 1635, 1, 012093.

Research output: Contribution to journal › Conference article › peer-review

Open Access

4 Scopus citations

2019

Mushy-zone microstructure and concentration variation of Co-93wt.%Sb hyperperitectic alloy under TGZM effect

Li, X., Li, S., Dou, L., Hongqiang, W. & Xueqing, C., 2019, In: Procedia Manufacturing. 37, p. 24-29 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Preparation of particles reinforced Aluminum matrix composites by In-Situ synthesized Al-Ti intermetallics

Cui, W. Y., Wang, W. J., Yan, X. J., Wan, Q., Jiang, R. J. & Li, F. G., 11 Mar 2019, In: IOP Conference Series: Materials Science and Engineering. 479, 1, 012076.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Solidification of niobium-silicide-based alloys during laser additive manufacturing process

Allen, A., Douglas, A. C., Feitosa, L. M., Qian, H., Li, J., Dong, H. B., Lin, X. & Li, Y., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012006.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Scopus citations

2018

Characterization and the improved Arrhenius model of 0Cr11Ni₂MoVNb steel during hot deformation process

Fu, J., Li, F. & Li, Y., 13 Jul 2018, In: IOP Conference Series: Materials Science and Engineering. 382, 2, 022027.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Scopus citations

Characterization of damage and toughness of 5052 aluminum alloy based on continuum damage mechanics

Xue, F. & Li, F., 13 Dec 2018, In: IOP Conference Series: Materials Science and Engineering. 452, 2, 022046.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Development and application of CATIA-based interference simulation system for tube bending

Li, G. J., Huang, D., Guo, X. X., Ma, J. & Li, H., 3 Aug 2018, In: IOP Conference Series: Materials Science and Engineering. 392, 6, 062048.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Effects of intermediate annealing on the microstructure and transport properties of Bi-2223 wires and tapes

Ma, X., Zhang, S., Yu, Z., Liu, G., Zheng, H., Li, C., Li, J. & Zhang, P., 26 Jul 2018, In: Journal of Physics: Conference Series. 1054, 1, 012041.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Establishment of hot processing map and work hardening mechanism of 0Cr11Ni₂MoVNb stainless steel during hot compression process

Fu, J., Li, F. & Li, Y., 13 Jul 2018, In: IOP Conference Series: Materials Science and Engineering. 382, 2, 022029.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Scopus citations

Influence of mandrel parameters on cross-sectional deformation of H96 double-ridged rectangular tube with ridge groove fillers in H-typed rotary draw bending

Sun, X., Liu, C., Liu, Y. & Li, H., 2018, In: Procedia Manufacturing. 15, p. 812-819 8 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

4 Scopus citations

Research on the cross-scale thermal characteristics prediction method of integrated thermal protection materials for hypersonic vehicle

Liu, L., Shi, Y., Zhang, L., Yang, X., Wei, D. & Xiao, G., 2018, In: International Heat Transfer Conference. 2018-August, p. 8661-8669 9 p.

Research output: Contribution to journal › Conference article › peer-review

2017

A modified Johnson-Cook model of as-quenched AA2219 considering negative to positive strain rate sensitivities over a wide temperature range

Li, Z. X., Zhan, M., Fan, X. G. & Tan, J. Q., 2017, In: Procedia Engineering. 207, p. 155-160 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

11 Scopus citations

A unique spinning method for grain refinement: Repetitive shear spinning

Wang, X. X., Zhan, M., Fu, M. W., Guo, J., Xu, R. Q. & Lei, X. P., 2017, In: Procedia Engineering. 207, p. 1725-1730 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

6 Scopus citations

Effect of strain reversal on microstructure and mechanical properties of Ti-6Al-4V alloy under cyclic torsion deformation

Ma, X., Li, F., Mao, X., Yuan, S. & Wang, J., 2017, In: Procedia Engineering. 207, p. 1469-1474 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

4 Scopus citations

Formation mechanism, prediction and control of the forming defects in transitional region during local loading forming of Ti-alloy rib-web component

Gao, P. F., Fan, X. G., Zhan, M., Lei, Z. N. & Cai, Y., 2017, In: Procedia Engineering. 207, p. 472-477 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Scopus citations

Microstructure evolution in near isothermal forming of titanium alloy component

Meng, M., Fan, X. G., Gao, P. F., Guo, L. G., Zhan, M. & Wei, K., 2017, In: Procedia Engineering. 207, p. 2173-2178 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

3 Scopus citations

Study of factors affecting simulation of static recrystallization of Ni-based superalloy through cellular automaton model

Zhang, F., Liu, D., Yang, Y., Wang, J. & Zheng, Y., 2017, In: Procedia Engineering. 207, p. 2131-2136 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

12 Scopus citations

2016

A method of quantitative characterization for the component of C/C composites based on the PLM video

Li, Y. X., Qi, L. H., Song, Y. S. & Li, H. J., 27 Jul 2016, In: IOP Conference Series: Materials Science and Engineering. 137, 1, 012016.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Springback prediction of titanium tube bending considering Bauschinger effect and Young's modulus variation

Ma, J., Yang, H., Li, H., Tao, Z. J. & Li, G. J., 1 Sep 2016, In: Journal of Physics: Conference Series. 734, 3, 032113.

Research output: Contribution to journal › Conference article › peer-review

Open Access

12 Scopus citations

Whole process modeling of joining of flareless AA 6061-T4 tube by extrusion-bulging forming using a polyurethane elastomer medium

Yang, J. C., Li, H., Yang, H. & Li, G. J., 1 Sep 2016, In: Journal of Physics: Conference Series. 734, 3, 032115.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

2015

Atomic investigation of steady-state dendrite tips by using phase-field crystal method

Tang, S., Li, J., Wang, Z. & Wang, J., 11 Jun 2015, In: IOP Conference Series: Materials Science and Engineering. 84, 1, 012070.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Oxidation behaviour and mechansim of MoSi₂-CrSi₂-SiC-Si coating for carbon/carbon composites from room temperature to 1873 K

Feng, T., Li, H. J., Hu, M. H. & Li, L., 4 Nov 2015, In: MATEC Web of Conferences. 30, 03002.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region

Wang, K., Luan, B. F., Li, M. Q. & Liu, Q., 7 Aug 2015, In: IOP Conference Series: Materials Science and Engineering. 89, 1, 012047.

Research output: Contribution to journal › Conference article › peer-review

Open Access

Test methods for investigation of reusable launch vehicle materials under severe environment

Luan, X., Cheng, L., Zhao, D., Zhang, Y. & Liu, X., 2 Nov 2015, In: MATEC Web of Conferences. 29, 00010.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2014

Modelling of wrinkling in NC bending of thin-walled tubes with large diameters under multi-die constraints using hybrid method

Liu, N., Yang, H., Li, H., Zhan, M., Tao, Z. & Hu, X., 2014, In: Procedia Engineering. 81, p. 2171-2176 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

11 Scopus citations

Some advances in plastic forming technologies of titanium alloys

Yang, H., Gao, P. F., Fan, X. G., Li, H. W., Sun, Z. C., Li, H., Guo, L. G., Zhan, M. & Liu, Y. L., 2014, In: Procedia Engineering. 81, p. 44-53 10 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access