Research on the key technology of product design on basis of Six Sigma

Miao Wang; Suihuai Yu; Qing Feng; Jianjie Chu

doi:10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma

Miao Wang, Suihuai Yu, Qing Feng, Jianjie Chu

机电学院

Northwestern Polytechnical University Xian

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

源语言	英语
主期刊名	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
页	344-348
页数	5
DOI	https://doi.org/10.1109/CAIDCD.2010.5681340
出版状态	已出版 - 2010
活动	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 - Yiwu, 中国期限: 17 11月 2010 → 19 11月 2010

出版系列

姓名	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
卷	1

会议

会议	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
国家/地区	中国
市	Yiwu
时期	17/11/10 → 19/11/10

访问文件

10.1109/CAIDCD.2010.5681340

其它文件与链接

链接到 Scopus 的出版物

引用此

Wang, M., Yu, S., Feng, Q., & Chu, J. (2010). Research on the key technology of product design on basis of Six Sigma. 在 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 (页码 344-348). 文章 5681340 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010; 卷 1). https://doi.org/10.1109/CAIDCD.2010.5681340

Wang, Miao ; Yu, Suihuai ; Feng, Qing 等. / Research on the key technology of product design on basis of Six Sigma. 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. 页码 344-348 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010).

@inproceedings{0fd1515e3cac49e69cb05bf6a6b07fff,

title = "Research on the key technology of product design on basis of Six Sigma",

abstract = "Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.",

keywords = "DFSS, Filing cabinet, Product design, Six Sigma",

author = "Miao Wang and Suihuai Yu and Qing Feng and Jianjie Chu",

year = "2010",

doi = "10.1109/CAIDCD.2010.5681340",

language = "英语",

isbn = "9781424479719",

series = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010",

pages = "344--348",

booktitle = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010",

note = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 ; Conference date: 17-11-2010 Through 19-11-2010",

}

Wang, M, Yu, S, Feng, Q & Chu, J 2010, Research on the key technology of product design on basis of Six Sigma. 在 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010., 5681340, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010, 卷 1, 页码 344-348, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010, Yiwu, 中国, 17/11/10. https://doi.org/10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma. / Wang, Miao; Yu, Suihuai; Feng, Qing 等.
2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. 页码 344-348 5681340 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010; 卷 1).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Research on the key technology of product design on basis of Six Sigma

AU - Wang, Miao

AU - Yu, Suihuai

AU - Feng, Qing

AU - Chu, Jianjie

PY - 2010

Y1 - 2010

N2 - Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

AB - Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

KW - DFSS

KW - Filing cabinet

KW - Product design

KW - Six Sigma

UR - http://www.scopus.com/inward/record.url?scp=79951626903&partnerID=8YFLogxK

U2 - 10.1109/CAIDCD.2010.5681340

DO - 10.1109/CAIDCD.2010.5681340

M3 - 会议稿件

AN - SCOPUS:79951626903

SN - 9781424479719

T3 - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

SP - 344

EP - 348

BT - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

T2 - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Y2 - 17 November 2010 through 19 November 2010

ER -

Wang M, Yu S, Feng Q, Chu J. Research on the key technology of product design on basis of Six Sigma. 在 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. 页码 344-348. 5681340. (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010). doi: 10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma

摘要

出版系列

会议

访问文件

其它文件与链接

指纹

引用此