Research on the key technology of product design on basis of Six Sigma

Miao Wang; Suihuai Yu; Qing Feng; Jianjie Chu

doi:10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma

Miao Wang, Suihuai Yu, Qing Feng, Jianjie Chu

School of Mechanical Engineering

Northwestern Polytechnical University Xian

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

Original language	English
Title of host publication	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
Pages	344-348
Number of pages	5
DOIs	https://doi.org/10.1109/CAIDCD.2010.5681340
State	Published - 2010
Event	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 - Yiwu, China Duration: 17 Nov 2010 → 19 Nov 2010

Publication series

Name	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
Volume	1

Conference

Conference	2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010
Country/Territory	China
City	Yiwu
Period	17/11/10 → 19/11/10

Keywords

DFSS
Filing cabinet
Product design
Six Sigma

Access to Document

10.1109/CAIDCD.2010.5681340

Cite this

Wang, M., Yu, S., Feng, Q., & Chu, J. (2010). Research on the key technology of product design on basis of Six Sigma. In 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 (pp. 344-348). Article 5681340 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010; Vol. 1). https://doi.org/10.1109/CAIDCD.2010.5681340

Wang, Miao ; Yu, Suihuai ; Feng, Qing et al. / Research on the key technology of product design on basis of Six Sigma. 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. pp. 344-348 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010).

@inproceedings{0fd1515e3cac49e69cb05bf6a6b07fff,

title = "Research on the key technology of product design on basis of Six Sigma",

abstract = "Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.",

keywords = "DFSS, Filing cabinet, Product design, Six Sigma",

author = "Miao Wang and Suihuai Yu and Qing Feng and Jianjie Chu",

year = "2010",

doi = "10.1109/CAIDCD.2010.5681340",

language = "英语",

isbn = "9781424479719",

series = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010",

pages = "344--348",

booktitle = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010",

note = "2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010 ; Conference date: 17-11-2010 Through 19-11-2010",

}

Wang, M, Yu, S, Feng, Q & Chu, J 2010, Research on the key technology of product design on basis of Six Sigma. in 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010., 5681340, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010, vol. 1, pp. 344-348, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010, Yiwu, China, 17/11/10. https://doi.org/10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma. / Wang, Miao; Yu, Suihuai; Feng, Qing et al.
2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. p. 344-348 5681340 (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Research on the key technology of product design on basis of Six Sigma

AU - Wang, Miao

AU - Yu, Suihuai

AU - Feng, Qing

AU - Chu, Jianjie

PY - 2010

Y1 - 2010

N2 - Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

AB - Through researching the key technology of product design, this paper put Six Sigma, which is a brand-new management mode, into new product design. It applies the DFSS to improve the product design flow, and also uses some research methods, such as flow chart, Pareto Chart, KANO, etc., to preliminarily construct the DFSS which is used in product designing. It offers a certain reference in promoting the correct development of product design and the improvement of design flow, enhance the efficiency of product development and improve the quality of design. It verifies the practical significance of Six Sigma in approaching or avoiding risks happening in new product development by actual design cases.

KW - DFSS

KW - Filing cabinet

KW - Product design

KW - Six Sigma

UR - http://www.scopus.com/inward/record.url?scp=79951626903&partnerID=8YFLogxK

U2 - 10.1109/CAIDCD.2010.5681340

DO - 10.1109/CAIDCD.2010.5681340

M3 - 会议稿件

AN - SCOPUS:79951626903

SN - 9781424479719

T3 - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

SP - 344

EP - 348

BT - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

T2 - 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Y2 - 17 November 2010 through 19 November 2010

ER -

Wang M, Yu S, Feng Q, Chu J. Research on the key technology of product design on basis of Six Sigma. In 2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010. 2010. p. 344-348. 5681340. (2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010). doi: 10.1109/CAIDCD.2010.5681340

Research on the key technology of product design on basis of Six Sigma

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this