每年的科研成果
每年的科研成果
搜索结果
-
2021
Exprimental Study of Atomization Feature of Coaxial Parallel Flow Airspray Nozzle
Li, Y., Suo, J., Zhu, Y. & Liu, Z., 31 8月 2021.科研成果: 会议稿件 › 论文 › 同行评审
1 引用 （Scopus） -
2019
Analysis on Flame Kernels of a high-speed diffusion jet flame via 3D tomographic measurements
Chi, Y., Lei, Q., Liu, B., Xia, Y. & Fan, W., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
An improved camera calibration method for 3D flame measurements based on tomographic reconstruction
Xia, Y., Lei, Q., Chi, Y., Fan, W. & Tao, B., 2019.科研成果: 会议稿件 › 论文 › 同行评审
2 引用 （Scopus） -
Comparative Study of Detonation Initiation Methods via High-repetition Rate Chemiluminescence Imaging at 150 kHz
Zheng, J., Lei, Q., He, J. & Fan, W., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
Effects of inclined injection conditions on a rotating detonation engine performance studied via numerical simulations
Zhu, Y., Fan, W., Wang, Z. & Wang, K., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
Long time operations of the valveless scheme to produce high frequency detonations without the purge process
Wang, K., Zhao, M., Wang, Z., Sun, T., Tan, F., Zhu, Y. & Fan, W., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
Rare failure event analysis of structures under mixed uncertainties
Wei, P., Bi, S., Zhang, Y. & Beer, M., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
Single detonation backpressure suppression tests on different isolators in a valveless airbreathing pulse detonation engine
Li, Q., Wang, K., Wang, Y., Fan, M., Wang, Z., Sun, T. & Fan, W., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
The influence of directions of pre-detonator on the characteristics of re-initiation process
Wang, Z., Wang, K., Li, W., Fan, M., Li, Q. & Fan, W., 2019.科研成果: 会议稿件 › 论文 › 同行评审
-
2017
A comparative study of obstacle-induced detonation initiation and flame jet detonation initiation in chambers at the same scale
Chi, Y., Fan, W., He, J. & Zheng, J., 2017.科研成果: 会议稿件 › 论文 › 同行评审
-
Experimental study of the nozzle-ejector effect on the performance of a pulse detonation engine
Wang, Z., Wang, Y., Liu, X., Li, H., Zhang, K. & Zheng, L., 2017.科研成果: 会议稿件 › 论文 › 同行评审
-
Experimental study on the performance of a pulse detonation rocket engine with injected flows
Zhang, Q., Fan, W., Wang, K., Lu, W. & Wang, Y., 2017.科研成果: 会议稿件 › 论文 › 同行评审
-
2015
Calculation study of heat generation in counter-rotating cylindrical roller bearing
Zhu, P., Liu, Z., Gao, W., Zhao, J. & Yaguo, L., 2015, 页码 91-97. 7 页码.科研成果: 会议稿件 › 论文 › 同行评审
3 引用 （Scopus） -
Signal processing for temperature measurement in harsh environments using diode laser absorption spectroscopy
Tao, B., Zhang, Y. J., Hu, Z., Zhao, X. & Fan, W., 2015.科研成果: 会议稿件 › 论文 › 同行评审
-
The performance study of axial breather with honeycomb in the aero-engine lubrication system
Zhao, J., Liu, Z., Zhu, P., Lu, Y. & Ren, G., 2015, 页码 128-132. 5 页码.科研成果: 会议稿件 › 论文 › 同行评审
-
The research on the real-time and full-enveloped model identification of turbofan engine's hydro-mechanical actuator
Xiao, H., Li, W. & Li, H., 2015, 页码 133-136. 4 页码.科研成果: 会议稿件 › 论文 › 同行评审
-
2013
A numerical model for unsteady oil film motion in aero-engine bearing chambers and experimental verification
Liu, Z., Zhao, J., Hu, J. & Lu, Y., 2013.科研成果: 会议稿件 › 论文 › 同行评审
-
2005
Axial location of casing treatment in multistage axial flow compressors
Zhu, J., Wu, Y. & Chu, W., 2005, 页码 365-371. 7 页码.科研成果: 会议稿件 › 论文 › 同行评审
-
The effects of bend skewed groove casing treatment on performance and flow field near endwall of an axial compressor
Zhu, J. & Chu, W., 2005, 页码 14147-14154. 8 页码.科研成果: 会议稿件 › 论文 › 同行评审
-
The effects of stepped tip gap on performance and flowfield of a subsonic axial-flow compressor rotor
Lu, X., Zhu, J., Chu, W. & Wang, R., 2005, 页码 373-380. 8 页码.科研成果: 会议稿件 › 论文 › 同行评审