Study on the surface modification and the adhesion performance of Polytetrafluoroethylene

Jun Wei Gu; Qiu Yu Zhang; Chao Xie; Jie Kong; Ying Han; Yu Sheng Tang

Study on the surface modification and the adhesion performance of Polytetrafluoroethylene

Jun Wei Gu, Qiu Yu Zhang, Chao Xie, Jie Kong, Ying Han, Yu Sheng Tang

化学与化工学院

科研成果: 期刊稿件 › 文章 › 同行评审

3 引用（Scopus）

摘要

The surface of Polytetrafluoroethylene (PTFE) sheet is pretreated using Argon plasma technique, and then the surface is modified by thermal-induced graft polymerization of glycidyl-methacrylate (GMA). The effects of different plasma treatment conditions and different monomer volume fraction of GMA on the bonding strength between PTFE and steel and the water contact angle of grafted PTFE are studied. Meantime, the grafted PTFE is characterized by means of X-ray Photoelectron Spectroscopy (XPS). The results show that GMA is successfully grafted onto the surface of PTFE, and the bonding strength between the grafted PTFE and steel is increased from 24.6 N·cm^-2 to 284.6 N·cm^-2 when the plasma treatment time is 5 min, the power is 50 W, the pressure is 50 Pa and the grafted monomer volume fraction of GMA is 20%.

源语言	英语
页（从-至）	79-83+91
期刊	Xi'an Shiyou Daxue Xuebao (Ziran Kexue Ban)/Journal of Xi'an Shiyou University, Natural Sciences Edition
卷	22
期	4
出版状态	已出版 - 7月 2007

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{109af77856424e079f5b2465bbb3a18b,

title = "Study on the surface modification and the adhesion performance of Polytetrafluoroethylene",

abstract = "The surface of Polytetrafluoroethylene (PTFE) sheet is pretreated using Argon plasma technique, and then the surface is modified by thermal-induced graft polymerization of glycidyl-methacrylate (GMA). The effects of different plasma treatment conditions and different monomer volume fraction of GMA on the bonding strength between PTFE and steel and the water contact angle of grafted PTFE are studied. Meantime, the grafted PTFE is characterized by means of X-ray Photoelectron Spectroscopy (XPS). The results show that GMA is successfully grafted onto the surface of PTFE, and the bonding strength between the grafted PTFE and steel is increased from 24.6 N·cm-2 to 284.6 N·cm-2 when the plasma treatment time is 5 min, the power is 50 W, the pressure is 50 Pa and the grafted monomer volume fraction of GMA is 20%.",

keywords = "Glycidyl-methacrylate, Graft, Modification, Polytetrafluoroethylene",

author = "Gu, {Jun Wei} and Zhang, {Qiu Yu} and Chao Xie and Jie Kong and Ying Han and Tang, {Yu Sheng}",

year = "2007",

month = jul,

language = "英语",

volume = "22",

pages = "79--83+91",

journal = "Xi'an Shiyou Daxue Xuebao (Ziran Kexue Ban)/Journal of Xi'an Shiyou University, Natural Sciences Edition",

issn = "1673-064X",

publisher = "Xi'an Petroleum Institute",

number = "4",

}

TY - JOUR

T1 - Study on the surface modification and the adhesion performance of Polytetrafluoroethylene

AU - Gu, Jun Wei

AU - Zhang, Qiu Yu

AU - Xie, Chao

AU - Kong, Jie

AU - Han, Ying

AU - Tang, Yu Sheng

PY - 2007/7

Y1 - 2007/7

N2 - The surface of Polytetrafluoroethylene (PTFE) sheet is pretreated using Argon plasma technique, and then the surface is modified by thermal-induced graft polymerization of glycidyl-methacrylate (GMA). The effects of different plasma treatment conditions and different monomer volume fraction of GMA on the bonding strength between PTFE and steel and the water contact angle of grafted PTFE are studied. Meantime, the grafted PTFE is characterized by means of X-ray Photoelectron Spectroscopy (XPS). The results show that GMA is successfully grafted onto the surface of PTFE, and the bonding strength between the grafted PTFE and steel is increased from 24.6 N·cm-2 to 284.6 N·cm-2 when the plasma treatment time is 5 min, the power is 50 W, the pressure is 50 Pa and the grafted monomer volume fraction of GMA is 20%.

AB - The surface of Polytetrafluoroethylene (PTFE) sheet is pretreated using Argon plasma technique, and then the surface is modified by thermal-induced graft polymerization of glycidyl-methacrylate (GMA). The effects of different plasma treatment conditions and different monomer volume fraction of GMA on the bonding strength between PTFE and steel and the water contact angle of grafted PTFE are studied. Meantime, the grafted PTFE is characterized by means of X-ray Photoelectron Spectroscopy (XPS). The results show that GMA is successfully grafted onto the surface of PTFE, and the bonding strength between the grafted PTFE and steel is increased from 24.6 N·cm-2 to 284.6 N·cm-2 when the plasma treatment time is 5 min, the power is 50 W, the pressure is 50 Pa and the grafted monomer volume fraction of GMA is 20%.

KW - Glycidyl-methacrylate

KW - Graft

KW - Modification

KW - Polytetrafluoroethylene

UR - http://www.scopus.com/inward/record.url?scp=34548336666&partnerID=8YFLogxK

M3 - 文章

AN - SCOPUS:34548336666

SN - 1673-064X

VL - 22

SP - 79-83+91

JO - Xi'an Shiyou Daxue Xuebao (Ziran Kexue Ban)/Journal of Xi'an Shiyou University, Natural Sciences Edition

JF - Xi'an Shiyou Daxue Xuebao (Ziran Kexue Ban)/Journal of Xi'an Shiyou University, Natural Sciences Edition

IS - 4

ER -

Study on the surface modification and the adhesion performance of Polytetrafluoroethylene

摘要

其它文件与链接

指纹

引用此