Shot peening parameters optimization based on residual stress-induced deformation of large fan blades

Jiyin Zhang; Changfeng Yao; Liang Tan; Minchao Cui; Zhiqiang Lin; Wei Han; Xianglu Min

doi:10.1016/j.tws.2021.107467

Shot peening parameters optimization based on residual stress-induced deformation of large fan blades

Jiyin Zhang, Changfeng Yao, Liang Tan, Minchao Cui, Zhiqiang Lin, Wei Han, Xianglu Min

机电学院

科研成果: 期刊稿件 › 文章 › 同行评审

23 引用（Scopus）

摘要

Deformation of fan blades after shot peening is investigated. A finite element analysis (FEA) model of deformation induced by compressive residual stress (CRS) reveals that the difference in CRS between blade back and blade basin is the main cause of deformation. An FEA model of the influence of shot peening parameters on residual stress shows that to minimize deformation, the parameters should be optimized to give a CRS in the blade back −80 MPa to −50 MPa greater than that in the blade basin. An experimental study shows that the optimized parameters greatly reduce blade deformation caused by shot peening.

源语言	英语
文章编号	107467
期刊	Thin-Walled Structures
卷	161
DOI	https://doi.org/10.1016/j.tws.2021.107467
出版状态	已出版 - 4月 2021

访问文件

10.1016/j.tws.2021.107467

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{0c2752d528074eeeb980183daeb81554,

title = "Shot peening parameters optimization based on residual stress-induced deformation of large fan blades",

abstract = "Deformation of fan blades after shot peening is investigated. A finite element analysis (FEA) model of deformation induced by compressive residual stress (CRS) reveals that the difference in CRS between blade back and blade basin is the main cause of deformation. An FEA model of the influence of shot peening parameters on residual stress shows that to minimize deformation, the parameters should be optimized to give a CRS in the blade back −80 MPa to −50 MPa greater than that in the blade basin. An experimental study shows that the optimized parameters greatly reduce blade deformation caused by shot peening.",

keywords = "Compressive residual stress, Deformation, Fan blade, Finite element analysis, Shot peening",

author = "Jiyin Zhang and Changfeng Yao and Liang Tan and Minchao Cui and Zhiqiang Lin and Wei Han and Xianglu Min",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier Ltd",

year = "2021",

month = apr,

doi = "10.1016/j.tws.2021.107467",

language = "英语",

volume = "161",

journal = "Thin-Walled Structures",

issn = "0263-8231",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Shot peening parameters optimization based on residual stress-induced deformation of large fan blades

AU - Zhang, Jiyin

AU - Yao, Changfeng

AU - Tan, Liang

AU - Cui, Minchao

AU - Lin, Zhiqiang

AU - Han, Wei

AU - Min, Xianglu

PY - 2021/4

Y1 - 2021/4

N2 - Deformation of fan blades after shot peening is investigated. A finite element analysis (FEA) model of deformation induced by compressive residual stress (CRS) reveals that the difference in CRS between blade back and blade basin is the main cause of deformation. An FEA model of the influence of shot peening parameters on residual stress shows that to minimize deformation, the parameters should be optimized to give a CRS in the blade back −80 MPa to −50 MPa greater than that in the blade basin. An experimental study shows that the optimized parameters greatly reduce blade deformation caused by shot peening.

AB - Deformation of fan blades after shot peening is investigated. A finite element analysis (FEA) model of deformation induced by compressive residual stress (CRS) reveals that the difference in CRS between blade back and blade basin is the main cause of deformation. An FEA model of the influence of shot peening parameters on residual stress shows that to minimize deformation, the parameters should be optimized to give a CRS in the blade back −80 MPa to −50 MPa greater than that in the blade basin. An experimental study shows that the optimized parameters greatly reduce blade deformation caused by shot peening.

KW - Compressive residual stress

KW - Deformation

KW - Fan blade

KW - Finite element analysis

KW - Shot peening

UR - http://www.scopus.com/inward/record.url?scp=85100023800&partnerID=8YFLogxK

U2 - 10.1016/j.tws.2021.107467

DO - 10.1016/j.tws.2021.107467

M3 - 文章

AN - SCOPUS:85100023800

SN - 0263-8231

VL - 161

JO - Thin-Walled Structures

JF - Thin-Walled Structures

M1 - 107467

ER -

Shot peening parameters optimization based on residual stress-induced deformation of large fan blades

摘要

访问文件

其它文件与链接

指纹

引用此