Realizing the perfect sound absorption and broadening effective band using porous material and micro-perforated plate

The noise attenuation ability of a single material or structure, especially for low-frequency noise, is limited by its thickness. Aiming to achieve high-efficiency noise attenuation at low frequencies, this paper proposes the methods of porous material filling and micro-perforated plate (MPP) embedding to design a perfect sound absorber at different frequencies using the under-loss Helmholtz resonator (HR). Based on the transfer matrix method, the theoretical calculation models of the sound absorption coefficients of the HR, Helmholtz resonator with porous material (HRP), and Helmholtz resonator with micro-perforated plates (HRM) are constructed. Based on the theoretical models, the under-loss absorber HR1 with the peak absorption at 243 Hz, and the HRP and HRM with perfect absorption at 212 Hz and 157 Hz are designed, respectively. The impedance analysis and complex frequency plane method are used to analyze the sound absorption mechanisms of the HR1, HRP, and HRM. The accuracy of the theoretical model is verified by the finite element method. Finally, the three acoustic absorbers are manufactured using 3D printing technology, and the absorption coefficients are evaluated experimentally. The experimental results show that the HR1 has a high working frequency at 245 Hz and a narrow bandwidth of high-efficiency sound absorption (α > 0.8), which is only 12 Hz. The working frequency of the HRP is 214 Hz, and its high-efficiency sound absorption bandwidth is 54 Hz. The HRP has the lowest working frequency at 157 Hz and the widest high-efficiency sound absorption bandwidth of 58 Hz among the three absorbers. The research results presented in this paper provide a reference for the realization of low-frequency broadband noise attenuation designs and have certain application potential in noise control.