Preparation and properties of nano-SiC particle reinforced Al-Mg composite

Chao Wu; Ai Zhi Sun; Yong Sheng Liu; Cheng Chang Jia; Bo Wen Liu; Chuan Zhou; Xiao Hong

doi:10.19591/j.cnki.cn11-1974/tf.2017.03.004

Preparation and properties of nano-SiC particle reinforced Al-Mg composite

Chao Wu, Ai Zhi Sun, Yong Sheng Liu, Cheng Chang Jia, Bo Wen Liu, Chuan Zhou, Xiao Hong

科研成果: 期刊稿件 › 文章 › 同行评审

3 引用（Scopus）

摘要

The Al-Mg composites reinforced by nano-SiC particles (SiC_p, average particle size 40 nm) in different particle contents of 0%, 0.5%, 1.0%, 2.0%, and 5.0% by mass were prepared by spark plasma sintering (SPS) in this paper. The microstructures of nano-SiC_p reinforced Al-Mg composites (SiC_p/Al-Mg) were observed by scanning electron microscope (SEM), the mechanical properties of the composites were tested, and the optimum SiC_p content was defined. The results show that, the composite hardness increases with the increase of the nano-SiC_p content, the tensile strength increases first and then decreases. The SiC_p/Al-Mg composites with 1.0% nano-SiC_p show the best performance, the relative density and tensile strength reaches 98.36% and 301.5 MPa, respectively.

源语言	英语
页（从-至）	182-187
页数	6
期刊	Fenmo Yejin Jishu/Powder Metallurgy Technology
卷	35
期	3
DOI	https://doi.org/10.19591/j.cnki.cn11-1974/tf.2017.03.004
出版状态	已出版 - 27 6月 2017
已对外发布	是

访问文件

10.19591/j.cnki.cn11-1974/tf.2017.03.004

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{4f2a4a5a205f43b8bf380e7a24b7bfdb,

title = "Preparation and properties of nano-SiC particle reinforced Al-Mg composite",

abstract = "The Al-Mg composites reinforced by nano-SiC particles (SiCp, average particle size 40 nm) in different particle contents of 0%, 0.5%, 1.0%, 2.0%, and 5.0% by mass were prepared by spark plasma sintering (SPS) in this paper. The microstructures of nano-SiCp reinforced Al-Mg composites (SiCp/Al-Mg) were observed by scanning electron microscope (SEM), the mechanical properties of the composites were tested, and the optimum SiCp content was defined. The results show that, the composite hardness increases with the increase of the nano-SiCp content, the tensile strength increases first and then decreases. The SiCp/Al-Mg composites with 1.0% nano-SiCp show the best performance, the relative density and tensile strength reaches 98.36% and 301.5 MPa, respectively.",

keywords = "Al-Mg composites, Nano-SiC, Particle reinforcement, Tensile strength",

author = "Chao Wu and Sun, {Ai Zhi} and Liu, {Yong Sheng} and Jia, {Cheng Chang} and Liu, {Bo Wen} and Chuan Zhou and Xiao Hong",

year = "2017",

month = jun,

day = "27",

doi = "10.19591/j.cnki.cn11-1974/tf.2017.03.004",

language = "英语",

volume = "35",

pages = "182--187",

journal = "Fenmo Yejin Jishu/Powder Metallurgy Technology",

issn = "1001-3784",

publisher = "University of Science and Technology Beijing",

number = "3",

}

TY - JOUR

T1 - Preparation and properties of nano-SiC particle reinforced Al-Mg composite

AU - Wu, Chao

AU - Sun, Ai Zhi

AU - Liu, Yong Sheng

AU - Jia, Cheng Chang

AU - Liu, Bo Wen

AU - Zhou, Chuan

AU - Hong, Xiao

PY - 2017/6/27

Y1 - 2017/6/27

N2 - The Al-Mg composites reinforced by nano-SiC particles (SiCp, average particle size 40 nm) in different particle contents of 0%, 0.5%, 1.0%, 2.0%, and 5.0% by mass were prepared by spark plasma sintering (SPS) in this paper. The microstructures of nano-SiCp reinforced Al-Mg composites (SiCp/Al-Mg) were observed by scanning electron microscope (SEM), the mechanical properties of the composites were tested, and the optimum SiCp content was defined. The results show that, the composite hardness increases with the increase of the nano-SiCp content, the tensile strength increases first and then decreases. The SiCp/Al-Mg composites with 1.0% nano-SiCp show the best performance, the relative density and tensile strength reaches 98.36% and 301.5 MPa, respectively.

AB - The Al-Mg composites reinforced by nano-SiC particles (SiCp, average particle size 40 nm) in different particle contents of 0%, 0.5%, 1.0%, 2.0%, and 5.0% by mass were prepared by spark plasma sintering (SPS) in this paper. The microstructures of nano-SiCp reinforced Al-Mg composites (SiCp/Al-Mg) were observed by scanning electron microscope (SEM), the mechanical properties of the composites were tested, and the optimum SiCp content was defined. The results show that, the composite hardness increases with the increase of the nano-SiCp content, the tensile strength increases first and then decreases. The SiCp/Al-Mg composites with 1.0% nano-SiCp show the best performance, the relative density and tensile strength reaches 98.36% and 301.5 MPa, respectively.

KW - Al-Mg composites

KW - Nano-SiC

KW - Particle reinforcement

KW - Tensile strength

UR - http://www.scopus.com/inward/record.url?scp=85027333464&partnerID=8YFLogxK

U2 - 10.19591/j.cnki.cn11-1974/tf.2017.03.004

DO - 10.19591/j.cnki.cn11-1974/tf.2017.03.004

M3 - 文章

AN - SCOPUS:85027333464

SN - 1001-3784

VL - 35

SP - 182

EP - 187

JO - Fenmo Yejin Jishu/Powder Metallurgy Technology

JF - Fenmo Yejin Jishu/Powder Metallurgy Technology

IS - 3

ER -

Preparation and properties of nano-SiC particle reinforced Al-Mg composite

摘要

访问文件

其它文件与链接

指纹

引用此