Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite

Z. Chen; L. Zhang; L. Cheng; Y. Xu

doi:10.4028/www.scientific.net/kem.249.25

Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite

Z. Chen, L. Zhang, L. Cheng, Y. Xu

材料学院

Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 会议文章 › 同行评审

1 引用（Scopus）

摘要

Oxide fiber/oxide matrix composites have been considered as an important and very attractive subpart of ceramic matrix composites because of their inherent stability in oxidization atmospheres at high temperature. Nextel 720 fibers reinforced mullite-corundum ceramic matrix composite was prepared by chemical vapor infiltration followed by sintering process. A mixed matrix including γ-alumina and silica was obtained by chemical vapor infiltration at 550°C using AlCl₃-SiCl₄-H ₂-CO₂ system. Then the mixture was crystallized into mullite-corundum matrix by sintering at 1260°C. Effects of (H ₂+CO₂)/(AlCl₃+SiCl₄) flow ratio and total pressure on weight gain of preform were analyzed. SEM photographs of the composite showed the matrix surrounding filaments was dense and uniform.

源语言	英语
页（从-至）	25-30
页数	6
期刊	Key Engineering Materials
卷	249
DOI	https://doi.org/10.4028/www.scientific.net/kem.249.25
出版状态	已出版 - 2003
活动	Composite Materials III: Proceedings of the 3rd China Cross-Strait Conference on Composite Materials - Wuhan, 中国期限: 7 5月 2003 → 12 5月 2003

访问文件

10.4028/www.scientific.net/kem.249.25

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{bf064bf8430646baaabdccf6797e5390,

title = "Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite",

abstract = "Oxide fiber/oxide matrix composites have been considered as an important and very attractive subpart of ceramic matrix composites because of their inherent stability in oxidization atmospheres at high temperature. Nextel 720 fibers reinforced mullite-corundum ceramic matrix composite was prepared by chemical vapor infiltration followed by sintering process. A mixed matrix including γ-alumina and silica was obtained by chemical vapor infiltration at 550°C using AlCl3-SiCl4-H 2-CO2 system. Then the mixture was crystallized into mullite-corundum matrix by sintering at 1260°C. Effects of (H 2+CO2)/(AlCl3+SiCl4) flow ratio and total pressure on weight gain of preform were analyzed. SEM photographs of the composite showed the matrix surrounding filaments was dense and uniform.",

keywords = "Chemical vapor infiltration, Microstructure, Nextel 720/mullite-corundum, Sintering",

author = "Z. Chen and L. Zhang and L. Cheng and Y. Xu",

year = "2003",

doi = "10.4028/www.scientific.net/kem.249.25",

language = "英语",

volume = "249",

pages = "25--30",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications Ltd",

note = "Composite Materials III: Proceedings of the 3rd China Cross-Strait Conference on Composite Materials ; Conference date: 07-05-2003 Through 12-05-2003",

}

TY - JOUR

T1 - Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite

AU - Chen, Z.

AU - Zhang, L.

AU - Cheng, L.

AU - Xu, Y.

PY - 2003

Y1 - 2003

N2 - Oxide fiber/oxide matrix composites have been considered as an important and very attractive subpart of ceramic matrix composites because of their inherent stability in oxidization atmospheres at high temperature. Nextel 720 fibers reinforced mullite-corundum ceramic matrix composite was prepared by chemical vapor infiltration followed by sintering process. A mixed matrix including γ-alumina and silica was obtained by chemical vapor infiltration at 550°C using AlCl3-SiCl4-H 2-CO2 system. Then the mixture was crystallized into mullite-corundum matrix by sintering at 1260°C. Effects of (H 2+CO2)/(AlCl3+SiCl4) flow ratio and total pressure on weight gain of preform were analyzed. SEM photographs of the composite showed the matrix surrounding filaments was dense and uniform.

AB - Oxide fiber/oxide matrix composites have been considered as an important and very attractive subpart of ceramic matrix composites because of their inherent stability in oxidization atmospheres at high temperature. Nextel 720 fibers reinforced mullite-corundum ceramic matrix composite was prepared by chemical vapor infiltration followed by sintering process. A mixed matrix including γ-alumina and silica was obtained by chemical vapor infiltration at 550°C using AlCl3-SiCl4-H 2-CO2 system. Then the mixture was crystallized into mullite-corundum matrix by sintering at 1260°C. Effects of (H 2+CO2)/(AlCl3+SiCl4) flow ratio and total pressure on weight gain of preform were analyzed. SEM photographs of the composite showed the matrix surrounding filaments was dense and uniform.

KW - Chemical vapor infiltration

KW - Microstructure

KW - Nextel 720/mullite-corundum

KW - Sintering

UR - http://www.scopus.com/inward/record.url?scp=0141828929&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/kem.249.25

DO - 10.4028/www.scientific.net/kem.249.25

M3 - 会议文章

AN - SCOPUS:0141828929

SN - 1013-9826

VL - 249

SP - 25

EP - 30

JO - Key Engineering Materials

JF - Key Engineering Materials

T2 - Composite Materials III: Proceedings of the 3rd China Cross-Strait Conference on Composite Materials

Y2 - 7 May 2003 through 12 May 2003

ER -

Preparation and Microstructure of Nextel 720/Mullite-Corundum Composite

摘要

访问文件

其它文件与链接

指纹

引用此