Microstructure and ambient mechanical properties of Nb-Ti-Cr-Si based ultrahigh temperature alloy by consumable arc melting

Baohui Guo, Xiping Guo

科研成果: 期刊稿件文章同行评审

2 引用 (Scopus)

摘要

The ingot of Nb-Ti-Cr-Si based ultrahigh temperature alloy was prepared by vacuum consumable arc melting, and the ambient mechanical properties of the alloy were measured. The results show that the chemical components are distributed uniformly at different positions of the master alloy except Cr whose concentration in the central of the ingot top is lower than that of other positions. The microstructure of the ingot is mainly composed of primary Nbss dendrites, Nbss/(Nb, X)5Si3 eutectic which exhibit typically lamellar or petal-like morphologies, and fine Nbss/Cr2Nb eutectic colonies. However, some (Nb, X)3Si are present at the top of the ingot alloy. The primary Nbss becomes coarser and directionally solidified character of Nbss/(Nb, X)5Si3 eutectic colonies disappear gradually from the edge to the central of the ingot. The volume of the fine Nbss/Cr2Nb eutectic colonies is reduced. The ambient tensile strength reaches 378.7 MPa, and the ambient fracture toughness is about 13.4 MPa·m1/2 for the Nb-Ti-Cr-Si alloy. In addition, ambient fracture mechanism is characterized by brittle quasicleavage mode in both fracture and tensile morphology.

源语言英语
页(从-至)1387-1392
页数6
期刊Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
42
7
出版状态已出版 - 7月 2013

指纹

探究 'Microstructure and ambient mechanical properties of Nb-Ti-Cr-Si based ultrahigh temperature alloy by consumable arc melting' 的科研主题。它们共同构成独一无二的指纹。

引用此