Microstructural characteristics of Ni-Sb eutectic alloys under substantial undercooling and containerless solidification conditions

Both Ni-36 wt pct Sb and Ni-52.8 wt pct Sb eutectic alloys were highly undercooled and rapidly solidified with the glass-fluxing method and drop-tube technique. Bulk samples of Ni-36 pct Sb and Ni-52.8 pct Sb eutectic alloys were undercooled by up to 225 K (0.16 T_E) and 218 K (0.16 T_E), respectively, with the glass-fluxing method. A transition from lamellar eutectic to anomalous eutectic was revealed beyond a critical undercooling ΔT₁*, which was complete at an undercooling of ΔT₂*. For Ni-36 pct Sb, ΔT₁* ≈ 60 K and ΔT₂* ≈ 218 K; for Ni-52.8 pct Sb, ΔT₁ ≈ 40 K and ΔT₂* 139 K. Under a drop-tube containerless solidification condition, the eutectic microstructures of these two eutectic alloys also exhibit such a "lamellar eutectic-anomalous eutectic" morphology transition. Meanwhile, a kind of spherical anomalous eutectic grain was found in a Ni-36 pct Sb eutectic alloy processed by the drop-tube technique, which was ascribed to the good spatial symmetry of the temperature field and concentration field caused by a reduced gravity condition during free fall. During the rapid solidification of a Ni-52.8 pct Sb eutectic alloy, surface nucleation dominates the nucleation event, even when the undercooling is relatively large. Theoretical calculations on the basis of the current eutectic growth and dendritic growth models reveal that γ-Ni₅Sb₂ dendritic growth displaces eutectic growth at large undercoolings in these two eutectic alloys. The tendency of independent nucleation of the two eutectic phases and their cooperative dendrite growth are responsible for the lamellar eutectic-anomalous eutectic microstructural transition.