High Tc Superconducting Step-edge Junctions and Their Properties in Millimeter-wave Band

Y. J. Feng; L. Kang; X. B. Wang; S. Z. Yang; J. P. Zuo; H. B. Wang; W. W. Xu; Q. H. Cheng; P. H. Wu; S. L. Yan; L. Zhou

doi:10.1109/77.403172

High Tc Superconducting Step-edge Junctions and Their Properties in Millimeter-wave Band

Y. J. Feng, L. Kang, X. B. Wang, S. Z. Yang, J. P. Zuo, H. B. Wang, W. W. Xu, Q. H. Cheng, P. H. Wu, S. L. Yan, L. Zhou

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用（Scopus）

摘要

Superconducting step-edge junctions were fabricated on step-edges in (100) LaAlO3 substrates by sputter-deposited epitaxial YBaCuO and TIBaCaCuO thin films. The substrate steps were patterned by ion beam etching using metal film as a mask. The transport properties of the junctions were characterized by four-probe electrical measurements. The critical current-normal resistance product (ICRN) was larger than 0.2mV (77K) for most of the junctions. Clear Shapiro steps were observed in the current-voltage characteristics of the junctions with 36GHz or 95GHz millimeter-wave irradiation. The high frequency properties of these high Tc Josephson junctions showed that they were quite suitable for the Josephson harmonic mixer used in the digital phase locked millimeter and sub-millimeter wave sources.

源语言	英语
页（从-至）	2798-2800
页数	3
期刊	IEEE Transactions on Applied Superconductivity
卷	5
期	2
DOI	https://doi.org/10.1109/77.403172
出版状态	已出版 - 6月 1995
已对外发布	是

访问文件

10.1109/77.403172

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{32c2a37b8a954681b4d71ec592066067,

title = "High Tc Superconducting Step-edge Junctions and Their Properties in Millimeter-wave Band",

abstract = "Superconducting step-edge junctions were fabricated on step-edges in (100) LaAlO3 substrates by sputter-deposited epitaxial YBaCuO and TIBaCaCuO thin films. The substrate steps were patterned by ion beam etching using metal film as a mask. The transport properties of the junctions were characterized by four-probe electrical measurements. The critical current-normal resistance product (ICRN) was larger than 0.2mV (77K) for most of the junctions. Clear Shapiro steps were observed in the current-voltage characteristics of the junctions with 36GHz or 95GHz millimeter-wave irradiation. The high frequency properties of these high Tc Josephson junctions showed that they were quite suitable for the Josephson harmonic mixer used in the digital phase locked millimeter and sub-millimeter wave sources.",

author = "Feng, {Y. J.} and L. Kang and Wang, {X. B.} and Yang, {S. Z.} and Zuo, {J. P.} and Wang, {H. B.} and Xu, {W. W.} and Cheng, {Q. H.} and Wu, {P. H.} and Yan, {S. L.} and L. Zhou",

year = "1995",

month = jun,

doi = "10.1109/77.403172",

language = "英语",

volume = "5",

pages = "2798--2800",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - High Tc Superconducting Step-edge Junctions and Their Properties in Millimeter-wave Band

AU - Feng, Y. J.

AU - Kang, L.

AU - Wang, X. B.

AU - Yang, S. Z.

AU - Zuo, J. P.

AU - Wang, H. B.

AU - Xu, W. W.

AU - Cheng, Q. H.

AU - Wu, P. H.

AU - Yan, S. L.

AU - Zhou, L.

PY - 1995/6

Y1 - 1995/6

N2 - Superconducting step-edge junctions were fabricated on step-edges in (100) LaAlO3 substrates by sputter-deposited epitaxial YBaCuO and TIBaCaCuO thin films. The substrate steps were patterned by ion beam etching using metal film as a mask. The transport properties of the junctions were characterized by four-probe electrical measurements. The critical current-normal resistance product (ICRN) was larger than 0.2mV (77K) for most of the junctions. Clear Shapiro steps were observed in the current-voltage characteristics of the junctions with 36GHz or 95GHz millimeter-wave irradiation. The high frequency properties of these high Tc Josephson junctions showed that they were quite suitable for the Josephson harmonic mixer used in the digital phase locked millimeter and sub-millimeter wave sources.

AB - Superconducting step-edge junctions were fabricated on step-edges in (100) LaAlO3 substrates by sputter-deposited epitaxial YBaCuO and TIBaCaCuO thin films. The substrate steps were patterned by ion beam etching using metal film as a mask. The transport properties of the junctions were characterized by four-probe electrical measurements. The critical current-normal resistance product (ICRN) was larger than 0.2mV (77K) for most of the junctions. Clear Shapiro steps were observed in the current-voltage characteristics of the junctions with 36GHz or 95GHz millimeter-wave irradiation. The high frequency properties of these high Tc Josephson junctions showed that they were quite suitable for the Josephson harmonic mixer used in the digital phase locked millimeter and sub-millimeter wave sources.

UR - http://www.scopus.com/inward/record.url?scp=0029327849&partnerID=8YFLogxK

U2 - 10.1109/77.403172

DO - 10.1109/77.403172

M3 - 文章

AN - SCOPUS:0029327849

SN - 1051-8223

VL - 5

SP - 2798

EP - 2800

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2

ER -

High Tc Superconducting Step-edge Junctions and Their Properties in Millimeter-wave Band

摘要

访问文件

其它文件与链接

指纹

引用此