Formation of twin-density gradient induced by 9R structure transformation and boundary migration to improve performance in GH4586 superalloy

Ke Chen, Jiao Luo

科研成果: 期刊稿件文章同行评审

摘要

In this work, the evolution mechanisms of microstructure subjected to deformation and heat treatment were thoroughly investigated using scanning electron microscope (SEM), electron backscatter diffraction (EBSD) and transmission electron microscope (TEM) observations. During deformation, γ matrix transformed into 9R structure via gliding of a/6[112¯] partial and then transformed into twin structure via gliding of a/6[112¯] and a/6[12¯1] partials. Besides, fast grain boundary migration rate was beneficial for the development of twin boundaries (TBs). However, severe interaction between pre-existed TBs and dislocations dominated by activation of (12¯1)[011] slip system would cause deviation of rotation angle and shift of rotation axis, leading to decreasing TBs density. During heat treatment, stored-energy-driven boundary migration was weakened due to consumption of stored energy, and curvature-driven boundary migration became dominated at different regions, reducing the positive effects of boundary migration on TBs development. Based on the above analysis, a novel design of microstructure with gradient TBs density by controlling-strain deformation and gradient-temperature heat treatment was proposed. Due to gradient strain, TBs density increased from the low-strain (LS) region to the high-strain (HS) region induced by 9R structure transformation and boundary migration. Due to gradient temperature, TBs density decreased obviously in the low-strain and high-temperature (LS-HT) region under the effect of grains annexation, while it only decreased slightly in the high-strain and low-temperature (HS-LT) region due to the poorer grain boundary mobility. Then, tensile strength and fracture toughness tests were carried out to evaluate the performance of gradient microstructure. The results showed that the as-prepared microstructure improved tensile strength by 13.6% from the intermediate transition (IT) region to the HS-LT region and fracture toughness by 11.7% from the IT region to the LS-HT region. Finally, the influence of as-prepared gradient microstructure on mechanical properties was thoroughly discussed.

源语言英语
文章编号114796
期刊Materials Characterization
221
DOI
出版状态已出版 - 3月 2025

指纹

探究 'Formation of twin-density gradient induced by 9R structure transformation and boundary migration to improve performance in GH4586 superalloy' 的科研主题。它们共同构成独一无二的指纹。

引用此