FIRST 5T 3D: Interferometric performances of a laser written bream combiner for FIRST/SUBARU

G. Martin, K. Barjot, M. Lallement, H. D. Kenchington-Smith, E. Huby, S. Lacour, C. D'Amico, R. Stoian, S. Vievard, O. Guyon, G. Zhang, G. Cheng

科研成果: 书/报告/会议事项章节会议稿件同行评审

摘要

FIRST (Fibered Imager foR a Single Telescope instrument) is an on-sky instrument at SUBARU Telescope that enables high-contrast imaging and spectroscopy, thanks to a unique combination of pairwise combination of sub-apertures using a Photonic Integrated Circuit that allows spatial filtering by single-mode waveguides and cross-dispersion in the visible (~ 600-800 nm), a high-efficiency alternative to sparse aperture masking. To reduce crosstalk observed in planar PICs, and therefore increase the instrument's stability and sensitivity, we have designed and fabricated a series of 3D laser-written optical PICs with 5T beam combiners. Different laser powers were used to address different single-mode spectral ranges. The multi-aperture beam combiner consists of five input waveguides spaced by 250 μm. Each input is split into four waveguides and the twenty channels undergo pairwise recombination, using Y-junctions, to produce ten outputs. In this work, we present the interferometric performances of these 3D PICs when exposed to a point-like light source (single star) or a two-points-like light source (binary) on the FIRST/SUBARU instrument replica built at LESIA - Observatoire de Paris. In previous work, we identified the optimal 5T 3D device, as being single-mode between 550-800 nm and showing good internal transmission in all input channels, above 45% at 635nm. The internal transmission (sum of the output values obtained for the four waveguides of the 1x4 splitter as normalized to the output signal obtained from the straight waveguide used as a reference) was measured. Two inputs achieved 80% transmission. The PIC was installed in the FIRST/SUBARU optical bench simulator at LESIA, to inject light into five inputs simultaneously and scan the fringes using independent MEMS segments, inducing a relative OPD modulation. The results of this study, comparing the signature obtained for a single source (star) as compared to a binary, will be presented in this work. We will show that both polarizations are guided, with no crosstalk, and analyze the interferometric performances as a function of the source type, showing that the binary companion can be detected.

源语言英语
主期刊名Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI
编辑Ramon Navarro, Ralf Jedamzik
出版商SPIE
ISBN(电子版)9781510675230
DOI
出版状态已出版 - 2024
活动Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI 2024 - Yokohama, 日本
期限: 16 6月 202422 6月 2024

出版系列

姓名Proceedings of SPIE - The International Society for Optical Engineering
13100
ISSN(印刷版)0277-786X
ISSN(电子版)1996-756X

会议

会议Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI 2024
国家/地区日本
Yokohama
时期16/06/2422/06/24

指纹

探究 'FIRST 5T 3D: Interferometric performances of a laser written bream combiner for FIRST/SUBARU' 的科研主题。它们共同构成独一无二的指纹。

引用此