Fabrication of 3D Nextel™ 720/Mullite at low temperature

Fu Ping Zhang; Zhao Feng Chen; Li Tong Zhang; Lai Fei Cheng; Yong Dong Xu

Fabrication of 3D Nextel™ 720/Mullite at low temperature

Fu Ping Zhang, Zhao Feng Chen, Li Tong Zhang, Lai Fei Cheng, Yong Dong Xu

材料学院

Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

2 引用（Scopus）

摘要

3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC₂ H₅)₄) and aluminum-s-butoxide (Al (OC₃ H₇)₃) as precursor through cycle infiltration at relative low temperature(≤ 1200°C).

源语言	英语
页（从-至）	33-36
页数	4
期刊	Hangkong Cailiao Xuebao/Journal of Aeronautical Materials
卷	22
期	2
出版状态	已出版 - 6月 2002

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{201045a22eba44289d756d528e84fec3,

title = "Fabrication of 3D Nextel{\texttrademark} 720/Mullite at low temperature",

abstract = "3D Nextel{\texttrademark} 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(≤ 1200°C).",

keywords = "3D Nextel{\texttrademark} 720/Mullite, Densification of composites, Precursor infiltration and pyrolysis",

author = "Zhang, {Fu Ping} and Chen, {Zhao Feng} and Zhang, {Li Tong} and Cheng, {Lai Fei} and Xu, {Yong Dong}",

year = "2002",

month = jun,

language = "英语",

volume = "22",

pages = "33--36",

journal = "Hangkong Cailiao Xuebao/Journal of Aeronautical Materials",

issn = "1005-5053",

publisher = "Science Press ",

number = "2",

}

TY - JOUR

T1 - Fabrication of 3D Nextel™ 720/Mullite at low temperature

AU - Zhang, Fu Ping

AU - Chen, Zhao Feng

AU - Zhang, Li Tong

AU - Cheng, Lai Fei

AU - Xu, Yong Dong

PY - 2002/6

Y1 - 2002/6

N2 - 3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(≤ 1200°C).

AB - 3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(≤ 1200°C).

KW - 3D Nextel™ 720/Mullite

KW - Densification of composites

KW - Precursor infiltration and pyrolysis

UR - http://www.scopus.com/inward/record.url?scp=0036627746&partnerID=8YFLogxK

M3 - 文章

AN - SCOPUS:0036627746

SN - 1005-5053

VL - 22

SP - 33

EP - 36

JO - Hangkong Cailiao Xuebao/Journal of Aeronautical Materials

JF - Hangkong Cailiao Xuebao/Journal of Aeronautical Materials

IS - 2

ER -

Fabrication of 3D Nextel™ 720/Mullite at low temperature

摘要

其它文件与链接

指纹

引用此