Effect of FSW process on anisotropic of titanium alloy T-joint

Yu Su, Wenya Li, Fuyang Gao, Achilles Vairis

科研成果: 期刊稿件文章同行评审

15 引用 (Scopus)

摘要

A T-joint with two welds in the same welding direction was successfully connected for an α titanium alloy using friction stir welding (FSW). The texture and joint properties under different stress directions were analyzed. Results show that grains undergo obvious recrystallization in stir zone (SZ), and the grain of SZ in the first weld is coarser compared to the SZ in the second weld due to secondary welding heat cycle. The welding temperature exceeding or not exceeding β transus greatly affects the final microstructure of the SZ, but does not affect its texture type. The Schmid factors are higher in rolling direction than those in normal direction, so the base material and SZ are more likely to deform when stress is applied in the rolling direction, which results in a lower microhardness in this direction. In addition, the effect of anisotropy on mechanical property was weaker in SZ than in base material.

源语言英语
页(从-至)25-33
页数9
期刊Materials and Manufacturing Processes
37
1
DOI
出版状态已出版 - 2022

指纹

探究 'Effect of FSW process on anisotropic of titanium alloy T-joint' 的科研主题。它们共同构成独一无二的指纹。

引用此