TY - JOUR
T1 - Effect of CrSi2 on the ablation resistance of a ZrSi2-Y2O3/SiC coating prepared by SAPS
AU - Liu, Fei
AU - Li, Hejun
AU - Zhang, Wei
AU - Yao, Xiyuan
AU - Fu, Qiangang
AU - He, Xinhai
N1 - Publisher Copyright:
© 2021 Elsevier Ltd and Techna Group S.r.l.
PY - 2021/6/1
Y1 - 2021/6/1
N2 - To improve the ablation resistance of carbon/carbon (C/C) composites, a proportional amount of ZrSi2-CrSi2-Y2O3 mixed particles were deposited on the surface of SiC-coated C/C composites by supersonic air plasma spraying (SAPS) to form a ZrSi2-CrSi2-Y2O3/SiC coating. The microstructure and phase compositions of the coating were studied by SEM, EDS, XRD and its anti-ablation performance was tested by oxyacetylene torch. The experimental results showed that the ZrSi2-CrSi2-Y2O3 outer coating had a dense microstructure without obvious pores and microcracks, and the thickness reached approximately 150 μm. In the process of being eroded and scoured by the oxyacetylene flame, the coating exhibited excellent anti-ablation property, which was attributed to the mosaic microstructure formed by ZrO2 and a Si-O-Cr liquid film on the coating surface. After experiencing an ablation time of 80 s, the linear ablation rate and the mass ablation rate of the coating were -1.0 ± 0.03 μm s-1 and -0.16 ± 0.014 mg s-1, respectively.
AB - To improve the ablation resistance of carbon/carbon (C/C) composites, a proportional amount of ZrSi2-CrSi2-Y2O3 mixed particles were deposited on the surface of SiC-coated C/C composites by supersonic air plasma spraying (SAPS) to form a ZrSi2-CrSi2-Y2O3/SiC coating. The microstructure and phase compositions of the coating were studied by SEM, EDS, XRD and its anti-ablation performance was tested by oxyacetylene torch. The experimental results showed that the ZrSi2-CrSi2-Y2O3 outer coating had a dense microstructure without obvious pores and microcracks, and the thickness reached approximately 150 μm. In the process of being eroded and scoured by the oxyacetylene flame, the coating exhibited excellent anti-ablation property, which was attributed to the mosaic microstructure formed by ZrO2 and a Si-O-Cr liquid film on the coating surface. After experiencing an ablation time of 80 s, the linear ablation rate and the mass ablation rate of the coating were -1.0 ± 0.03 μm s-1 and -0.16 ± 0.014 mg s-1, respectively.
KW - Ablation resistance
KW - Carbon/carbon composites
KW - Supersonic air plasma spraying
KW - ZrSi-CrSi-YO coating
UR - http://www.scopus.com/inward/record.url?scp=85101340559&partnerID=8YFLogxK
U2 - 10.1016/j.ceramint.2021.02.059
DO - 10.1016/j.ceramint.2021.02.059
M3 - 文章
AN - SCOPUS:85101340559
SN - 0272-8842
VL - 47
SP - 15030
EP - 15038
JO - Ceramics International
JF - Ceramics International
IS - 11
ER -