A comparative study of internal heat transfer enhancement of impingement/effusion cooling roughened by solid rib and slit rib

In the present study, we conducted a conjugate heat transfer (CHT) analysis for double-wall cooling with impingement and effusion, incorporating various types of ribs, using the Reynolds-averaged Navier-Stokes (RANS) method and the modified shear stress transport (SST) turbulence closure model (SST-KIC), accounting for the Kato-Launder modification (K), intermittency (I), and crossflow (C) transition effects. We comprehensively discussed the impact of slit type (parallel, inclined, convergent, and divergent), open-area ratio (β = 5%, 20%, and 40%), and jet Reynolds number on the turbulent flow and heat transfer in a double-wall cooling with slit ribs. Our findings indicated that the introduction of slit ribs significantly improved heat transfer and its uniformity on the target wall, albeit with a slight increase in pressure loss. The overall Nusselt number and thermal-hydraulic performance (THP) in cases with slit ribs gradually decreased with β, yet remained up to 17% and 13% higher than those observed on a smooth target wall. Notably, the open-area ratio of the slit rib exhibited a more pronounced effect on heat transfer over the target plate. For the divergent slit rib within the Reynolds number range of 4000-16 000, the heat transfer enhancement ratio reached the highest value at β of 0.05. In addition, we computed the entropy production caused by fluid friction and heat transfer, as well as the overall entropy production in double-wall cooling at different β and Re. The analysis revealed that the slit rib target plate performed better than the solid rib target plate, showing a distinct advantage in terms of total entropy production.