基于运动法的航空发动机高速燃油齿轮泵卸荷槽设计与验证

Jiangfeng Fu, Zhijie Zhao, Xianwei Liu, Shijie Wei, Jian Cui, Pengfei Wei

科研成果: 期刊稿件文章同行评审

3 引用 (Scopus)

摘要

The inherent oil trapping problem of gear pump becomes more and more serious because of high pressure,high speed and high temperature. The traditional relief groove design method has been difficult to meet the design requirements of high-performance fuel pump. For this reason,a design method of relief groove is pro⁃ posed based on motion method,and the effects of gear parameters on the performance of trapped oil are analysed from a global perspective of the whole pump,based on the constructed trapped oil model,and then the gear pa⁃ rameters are determined to provide constraint conditions for further design of relief groove. Then,the design of re⁃ lief groove of a certain type of fuel gear pump is studied based on the law of gear motion and the design principles of relief groove. Through the flow field simulation method,the oil trapping characteristics of the new relief groove and the traditional structure relief groove are simulated and compared under multiple working conditions. Finally,the effectiveness of the design method of the relief groove is verified by the prototype test. The research results show that:compared with the traditional rectangular relief groove,the maximum trapped oil pressure under the same working conditions is reduced by 63.4 MPa,the flow pulsation rate is reduced by 33.5%,the cavitation ar⁃ ea is smaller,and the working performance is better. These improvements can significantly alleviate the adverse effects of trapped oil. The gear pump has high volumetric efficiency and long-term anti-cavitation ability with new relief groove.

投稿的翻译标题Design and verification of relief groove for aero-engine high-speed fuel gear pump based on motion method
源语言繁体中文
文章编号2302047
期刊Tuijin Jishu/Journal of Propulsion Technology
45
5
DOI
出版状态已出版 - 5月 2024

关键词

  • Aero-engine
  • Fuel pump
  • Gear pump
  • Relief groove design
  • Trapped oil model

指纹

探究 '基于运动法的航空发动机高速燃油齿轮泵卸荷槽设计与验证' 的科研主题。它们共同构成独一无二的指纹。

引用此