Preparation and laser performances of Nd                         3+                         :GSGG ceramic powder raw materials

Shuming Wang; Xin Lin; Qing Ye; Jiangshan Li; Xiaofang Zhang; Ruiping Wang; Yanru Wang

doi:10.1016/j.jmst.2018.11.021

Preparation and laser performances of Nd ³⁺ :GSGG ceramic powder raw materials

Shuming Wang, Xin Lin, Qing Ye, Jiangshan Li, Xiaofang Zhang, Ruiping Wang, Yanru Wang

School of Materials Sience and Engineering

University of Science and Technology Beijing

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

This paper explores a new laser working material: gallium scandium gadolinium (GSGG), which was successfully prepared by one step co-precipitation method, and the potential properties of this Nd ³⁺ doped laser ceramic raw materials were proposed. The size of the prepared powder was uniform and mainly about 65 nm. The GSGG phase could be obtained after a heat-treatment of 1000 °C for 4 h, and the characterized fluorescence decay curves showed that about 1 at.% concentration of Nd ³⁺ in Nd ³⁺ :GSGG precursor presented optimum fluorescence intensity at 1.06 μm waveband.

Original language	English
Pages (from-to)	926-929
Number of pages	4
Journal	Journal of Materials Science and Technology
Volume	35
Issue number	5
DOIs	https://doi.org/10.1016/j.jmst.2018.11.021
State	Published - May 2019

Keywords

Laser properties
Nd :GSGG
One step co-precipitation

Access to Document

10.1016/j.jmst.2018.11.021

Cite this

@article{109f335ec9ad4f4aa5ce9843fd48a481,

title = " Preparation and laser performances of Nd 3+ :GSGG ceramic powder raw materials ",

abstract = " This paper explores a new laser working material: gallium scandium gadolinium (GSGG), which was successfully prepared by one step co-precipitation method, and the potential properties of this Nd 3+ doped laser ceramic raw materials were proposed. The size of the prepared powder was uniform and mainly about 65 nm. The GSGG phase could be obtained after a heat-treatment of 1000 °C for 4 h, and the characterized fluorescence decay curves showed that about 1 at.% concentration of Nd 3+ in Nd 3+ :GSGG precursor presented optimum fluorescence intensity at 1.06 μm waveband.",

keywords = "Laser properties, Nd :GSGG, One step co-precipitation",

author = "Shuming Wang and Xin Lin and Qing Ye and Jiangshan Li and Xiaofang Zhang and Ruiping Wang and Yanru Wang",

note = "Publisher Copyright: {\textcopyright} 2019",

year = "2019",

month = may,

doi = "10.1016/j.jmst.2018.11.021",

language = "英语",

volume = "35",

pages = "926--929",

journal = "Journal of Materials Science and Technology",

issn = "1005-0302",

publisher = "Chinese Society of Metals",

number = "5",

}

Preparation and laser performances of Nd ³⁺ :GSGG ceramic powder raw materials . / Wang, Shuming; Lin, Xin; Ye, Qing et al.
In: Journal of Materials Science and Technology, Vol. 35, No. 5, 05.2019, p. 926-929.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Preparation and laser performances of Nd 3+ :GSGG ceramic powder raw materials

AU - Wang, Shuming

AU - Lin, Xin

AU - Ye, Qing

AU - Li, Jiangshan

AU - Zhang, Xiaofang

AU - Wang, Ruiping

AU - Wang, Yanru

PY - 2019/5

Y1 - 2019/5

N2 - This paper explores a new laser working material: gallium scandium gadolinium (GSGG), which was successfully prepared by one step co-precipitation method, and the potential properties of this Nd 3+ doped laser ceramic raw materials were proposed. The size of the prepared powder was uniform and mainly about 65 nm. The GSGG phase could be obtained after a heat-treatment of 1000 °C for 4 h, and the characterized fluorescence decay curves showed that about 1 at.% concentration of Nd 3+ in Nd 3+ :GSGG precursor presented optimum fluorescence intensity at 1.06 μm waveband.

AB - This paper explores a new laser working material: gallium scandium gadolinium (GSGG), which was successfully prepared by one step co-precipitation method, and the potential properties of this Nd 3+ doped laser ceramic raw materials were proposed. The size of the prepared powder was uniform and mainly about 65 nm. The GSGG phase could be obtained after a heat-treatment of 1000 °C for 4 h, and the characterized fluorescence decay curves showed that about 1 at.% concentration of Nd 3+ in Nd 3+ :GSGG precursor presented optimum fluorescence intensity at 1.06 μm waveband.

KW - Laser properties

KW - Nd :GSGG

KW - One step co-precipitation

UR - http://www.scopus.com/inward/record.url?scp=85060892205&partnerID=8YFLogxK

U2 - 10.1016/j.jmst.2018.11.021

DO - 10.1016/j.jmst.2018.11.021

M3 - 文章

AN - SCOPUS:85060892205

SN - 1005-0302

VL - 35

SP - 926

EP - 929

JO - Journal of Materials Science and Technology

JF - Journal of Materials Science and Technology

IS - 5

ER -

Preparation and laser performances of Nd ³⁺ :GSGG ceramic powder raw materials

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this