Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment

Yao Wu Zhang; Wei Dong Zeng; Yi Gang Zhou; Kai Xuan Wang; Yi Dai; Yong Qing Zhao

doi:10.3969/j.issn.1007-2012.2009.06.019

Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment

Yao Wu Zhang, Wei Dong Zeng, Yi Gang Zhou, Kai Xuan Wang, Yi Dai, Yong Qing Zhao

School of Materials Sience and Engineering

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

The process of hot-pushing pipe-bending was simulated with different factors and different levels being chosen in the virtual orthogonal experiment. Based on the quantification of the value and the uniformity of the pipe thickness to the average value and variance of thickness, rationalized technological parameters were then obtained including bending angle, expanding ratio, initial bending radius, pushing speed and the influence of the friction coefficient. The verifying experiment shows that the results of the numerical simulation and orthogonal experiment were accurate and effectual and the pipe quality met the requirement on the wall thickness and uniformity.

Original language	English
Pages (from-to)	91-95
Number of pages	5
Journal	Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
Volume	16
Issue number	6
DOIs	https://doi.org/10.3969/j.issn.1007-2012.2009.06.019
State	Published - Dec 2009

Keywords

Hot-pushing pipe-bending
Numerical simulation
Parameter optimization
Virtual orthogonal experiment

Access to Document

10.3969/j.issn.1007-2012.2009.06.019

Cite this

@article{8def9d098e5e4d478a4ec603b9b25133,

title = "Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment",

abstract = "The process of hot-pushing pipe-bending was simulated with different factors and different levels being chosen in the virtual orthogonal experiment. Based on the quantification of the value and the uniformity of the pipe thickness to the average value and variance of thickness, rationalized technological parameters were then obtained including bending angle, expanding ratio, initial bending radius, pushing speed and the influence of the friction coefficient. The verifying experiment shows that the results of the numerical simulation and orthogonal experiment were accurate and effectual and the pipe quality met the requirement on the wall thickness and uniformity.",

keywords = "Hot-pushing pipe-bending, Numerical simulation, Parameter optimization, Virtual orthogonal experiment",

author = "Zhang, {Yao Wu} and Zeng, {Wei Dong} and Zhou, {Yi Gang} and Wang, {Kai Xuan} and Yi Dai and Zhao, {Yong Qing}",

year = "2009",

month = dec,

doi = "10.3969/j.issn.1007-2012.2009.06.019",

language = "英语",

volume = "16",

pages = "91--95",

journal = "Suxing Gongcheng Xuebao/Journal of Plasticity Engineering",

issn = "1007-2012",

publisher = "Beijing Res. Inst. of Mechanical and Elec. Technology",

number = "6",

}

TY - JOUR

T1 - Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment

AU - Zhang, Yao Wu

AU - Zeng, Wei Dong

AU - Zhou, Yi Gang

AU - Wang, Kai Xuan

AU - Dai, Yi

AU - Zhao, Yong Qing

PY - 2009/12

Y1 - 2009/12

N2 - The process of hot-pushing pipe-bending was simulated with different factors and different levels being chosen in the virtual orthogonal experiment. Based on the quantification of the value and the uniformity of the pipe thickness to the average value and variance of thickness, rationalized technological parameters were then obtained including bending angle, expanding ratio, initial bending radius, pushing speed and the influence of the friction coefficient. The verifying experiment shows that the results of the numerical simulation and orthogonal experiment were accurate and effectual and the pipe quality met the requirement on the wall thickness and uniformity.

AB - The process of hot-pushing pipe-bending was simulated with different factors and different levels being chosen in the virtual orthogonal experiment. Based on the quantification of the value and the uniformity of the pipe thickness to the average value and variance of thickness, rationalized technological parameters were then obtained including bending angle, expanding ratio, initial bending radius, pushing speed and the influence of the friction coefficient. The verifying experiment shows that the results of the numerical simulation and orthogonal experiment were accurate and effectual and the pipe quality met the requirement on the wall thickness and uniformity.

KW - Hot-pushing pipe-bending

KW - Numerical simulation

KW - Parameter optimization

KW - Virtual orthogonal experiment

UR - http://www.scopus.com/inward/record.url?scp=72449140682&partnerID=8YFLogxK

U2 - 10.3969/j.issn.1007-2012.2009.06.019

DO - 10.3969/j.issn.1007-2012.2009.06.019

M3 - 文章

AN - SCOPUS:72449140682

SN - 1007-2012

VL - 16

SP - 91

EP - 95

JO - Suxing Gongcheng Xuebao/Journal of Plasticity Engineering

JF - Suxing Gongcheng Xuebao/Journal of Plasticity Engineering

IS - 6

ER -

Optimal design of technological parameters for hot-pushing pipe-bending based on virtual orthogonal experiment

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this