TY - JOUR
T1 - Hybridizing piezoelectric and electromagnetic mechanisms with dynamic bistability for enhancing low-frequency rotational energy harvesting
AU - Fang, Shitong
AU - Xing, Juntong
AU - Chen, Keyu
AU - Fu, Xinlei
AU - Zhou, Shengxi
AU - Liao, Wei Hsin
N1 - Publisher Copyright:
© 2021 Author(s).
PY - 2021/12/13
Y1 - 2021/12/13
N2 - This Letter proposes a rotational energy harvester with hybrid piezoelectric and electromagnetic mechanisms and dynamic bistability. It consists of a piezoelectric stack with a force magnification frame and two connected springs, and two electromagnetic coils with inner impact stoppers. On the one hand, the hybrid energy transduction is applied in the gravity-based rotational energy harvester to enhance the energy output. On the other hand, the dynamic bistability by utilizing the centrifugal force is proposed to improve low-frequency performances. Simulation and experiments demonstrate that the proposed harvester starts to exhibit the bistability as the rotational frequency is increased from zero with subsequent interwell, chaotic, and intrawell motions, among which the interwell motions can increase the peak power from piezoelectric and electromagnetic parts by 24.99% and 57.41%, respectively. Specifically, the maximum total output power in experiments is measured to be 2.98 mW at 7.5 Hz and the spring stiffness of 4200 N/m. Moreover, the total power and frequency bandwidth are both higher but broader/narrower with a higher spring stiffness or impact distance, respectively.
AB - This Letter proposes a rotational energy harvester with hybrid piezoelectric and electromagnetic mechanisms and dynamic bistability. It consists of a piezoelectric stack with a force magnification frame and two connected springs, and two electromagnetic coils with inner impact stoppers. On the one hand, the hybrid energy transduction is applied in the gravity-based rotational energy harvester to enhance the energy output. On the other hand, the dynamic bistability by utilizing the centrifugal force is proposed to improve low-frequency performances. Simulation and experiments demonstrate that the proposed harvester starts to exhibit the bistability as the rotational frequency is increased from zero with subsequent interwell, chaotic, and intrawell motions, among which the interwell motions can increase the peak power from piezoelectric and electromagnetic parts by 24.99% and 57.41%, respectively. Specifically, the maximum total output power in experiments is measured to be 2.98 mW at 7.5 Hz and the spring stiffness of 4200 N/m. Moreover, the total power and frequency bandwidth are both higher but broader/narrower with a higher spring stiffness or impact distance, respectively.
UR - http://www.scopus.com/inward/record.url?scp=85121514204&partnerID=8YFLogxK
U2 - 10.1063/5.0073705
DO - 10.1063/5.0073705
M3 - 文章
AN - SCOPUS:85121514204
SN - 0003-6951
VL - 119
JO - Applied Physics Letters
JF - Applied Physics Letters
IS - 24
M1 - 243903
ER -