Abstract
At p = 3-10 MPa, G = 300-600 kg/(m2·s), Δfsub = 30°C-90°C, and q = 0-190 kW/m2, the experiments on steam-water two-phase flow instabilities have been performed. The test sections are parallel inclined internally ribbed pipes with an outer diameter of φ38.1 mm, a wall thickness of 7.5 mm, a obliquity of 19.5 and a length more than 15 m length. Based on the experimental results, the effects of pressure, mass velocity, inlet subcooling and asymmetrical heat flux on steam-water two-phase flow density wave oscillation were analyzed. The experimental results showed that the flow system were more stable as pressure increased. As an increase in mass velocity, critical heat flux increased but critical steam quality decreased. Inlet subcooling had a monotone effect on density wave oscillation, when inlet subcooling decreased, critical heat flux decreased. Under a certain working condition, critical heat flux on asymmetrically heating parallel pipes is higher than that on symmetrically heating parallel pipes, that means the system with symmetrically heating parallel pips was more stable.
Original language | English |
---|---|
Pages (from-to) | 11-14 |
Number of pages | 4 |
Journal | Hedongli Gongcheng/Nuclear Power Engineering |
Volume | 26 |
Issue number | 1 |
State | Published - Feb 2005 |
Externally published | Yes |
Keywords
- Density wave oscillation
- Parallel inclined internally ribbed pipes
- Steam and water two-phase flow