No photo of 文亚 李

View Scopus Profile

Li Wenya

Professor

Calculated based on number of publications stored in Pure and citations from Scopus
20032025

Research activity per year

Filter
Conference contribution

Search results

  • 2023

    Numerical simulation of rotary friction welding of a titanium alloy

    Chen, W., Xu, Y., Vairis, A., Bikmeyev, A. & Li, W., 2023, Advanced Manufacturing. American Society of Mechanical Engineers (ASME), v003t03a051. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2019

    Cold sprayed FeCoNiCrMn High Entropy Alloy (HEA) coating: Microstructure and tribological property

    Yin, S., Lupol, R., Li, W., Xu, Y., Song, B., Yan, X. & Kuang, M., 2019, International Thermal Spray Conference and Exposition, ITSC 2019: New Waves of Thermal Spray Technology for Sustainable Growth. Azarmi, F., Lau, Y., Veilleux, J., Widener, C., Toma, F., Koivuluoto, H., Balani, K., Li, H. & Shinoda, K. (eds.). ASM International, p. 45-52 8 p. (Proceedings of the International Thermal Spray Conference; vol. 2019-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Homogeneous Grain Refinement and Ductility Enhancement in AZ31B Magnesium Alloy Using Friction Stir Processing

    Patel, V., Li, W., Wen, Q., Su, Y. & Li, N., 2019, Magnesium Technology, 2019. Jordon, J. B., Orlov, D., Joshi, V. V. & Neelameggham, N. R. (eds.). Springer International Publishing, p. 83-87 5 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    10 Scopus citations

  • Stationary Shoulder Friction Stir Processing: A Low Heat Input Grain Refinement Technique for Magnesium Alloy

    Patel, V., Li, W., Wen, Q., Su, Y. & Li, N., 2019, Friction Stir Welding and Processing X. Sato, Y., Yan, D., Upadhyay, P., Mishra, R. & Hovanski, Y. (eds.). Springer International Publishing, p. 209-215 7 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations
  • 2018

    An investigation into the mechanism for enhanced mechanical properties in friction stir welded AA2024-T3 joints coated with cold spraying

    Li, N., Li, W., Yang, X., Xu, Y., Feng, Y. & Vairis, A., 2018, ASM International - International Thermal Spray Conference, ITSC 2018. Azarmi, F., Eden, T., Li, H., Toma, F.-L., Balani, K., Hussain, T. & Shinoda, K. (eds.). ASM International, p. 126-133 8 p. (Proceedings of the International Thermal Spray Conference; vol. 2018-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Anisotropic response of cold sprayed copper deposits

    Yang, R. & Li, W., 2018, ASM International - International Thermal Spray Conference, ITSC 2018. Azarmi, F., Eden, T., Li, H., Toma, F.-L., Balani, K., Hussain, T. & Shinoda, K. (eds.). ASM International, p. 187-193 7 p. (Proceedings of the International Thermal Spray Conference; vol. 2018-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2017

    Design of cold spray nozzle to optimize the particle velocity by numerical simulation

    Han, T. P., Li, W. Y., Guo, X. P. & Yang, X. W., 2017, International Thermal Spray Conference and Exposition, ITSC 2017. ASM International, p. 595-599 5 p. (Proceedings of the International Thermal Spray Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Microstructural evolution and mechanical property enhancement of a cold sprayed Cu-Zn alloy coating by post-spray friction stir processing

    Huang, C. J., Xie, Y. C., Verdy, C., Planche, M. P., Liao, H. L., Montavon, G., Li, W. Y. & Feng, Y., 2017, International Thermal Spray Conference and Exposition, ITSC 2017. ASM International, p. 425-428 4 p. (Proceedings of the International Thermal Spray Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2015

    Residual stresses analysis of cold sprayed coatings by numerical simulation

    Li, W., Yang, K. & Zhang, D., 2015, ASM International - International Thermal Spray Conference and Exposition, ITSC 2015. Agarwal, A., Lau, Y.-C., Widener, C. A., Turunen, E., Bolelli, G., Concustell, A., McDonald, A. & Toma, F.-L. (eds.). ASM International, p. 846-850 5 p. (Proceedings of the International Thermal Spray Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2014

    Numerical study of residual stresses and distortion in quenched large complicated thin-wall A357 aluminum alloy workpieces

    Yang, X., Li, W., Zhu, J., Lai, Z. & Nong, Z., 2014, Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014. Papp, R., MacKenzie, S., Goldstein, R. & Ferguson, B. L. (eds.). ASM International, p. 156-162 7 p. (Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2013

    Effect of substrate hardness and spray angle on the deposition behavior of cold sprayed Ti particles

    Yin, S., Suo, X. K., Liao, H. L., Wang, X. F. & Li, W. Y., 2013, International Thermal Spray Conference and Exposition, ITSC 2013: Innovative Coating Solutions for the Global Economy. ASM International, p. 660-665 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • High temperature oxidation behavior of cold sprayed Ni-Al2O 3 composite coating

    Huang, C. J., Li, W. Y., Yu, M. & Liao, H., 2013, International Thermal Spray Conference and Exposition, ITSC 2013: Innovative Coating Solutions for the Global Economy. ASM International, p. 227-234 8 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Prediction of critical velocity during cold spraying based on a coupled thermomechanical eulerian model

    Wang, F. F., Li, W. Y., Huang, C. J., Yu, M. & Liao, H. L., 2013, International Thermal Spray Conference and Exposition, ITSC 2013: Innovative Coating Solutions for the Global Economy. ASM International, p. 701-706 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2012

    Effect of SiC particle size on microstructure and properties of cold sprayed Al5056/SiCp composite coatings

    Yu, M., Li, W., Suo, X. & Liao, H., 2012, International Thermal Spray Conference and Exposition, ITSC 2012 - Air, Land, Water and the Human Body: Thermal Spray Science and Applications. ASM International, p. 298-304 7 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • EfFect of substrate preheating on bonding strength of cold-sprayed Mg coatings

    Suo, X. K., Yu, M., Planche, M. P., Liao, H., Yu, M. & Li, W. Y., 2012, International Thermal Spray Conference and Exposition, ITSC 2012 - Air, Land, Water and the Human Body: Thermal Spray Science and Applications. ASM International, p. 317-322 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Impacting behavior of large oxidized copper particles in cold spraying

    Li, W., Yu, M., Guo, X. & Liao, H., 2012, International Thermal Spray Conference and Exposition, ITSC 2012 - Air, Land, Water and the Human Body: Thermal Spray Science and Applications. ASM International, p. 277-282 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • 2011

    Effect of process parameters on welding variables during linear friction welding of Ti-6Al-4V alloy

    Ma, T. J., Chen, X. & Li, W. Y., 2011, Advanced Manufacturing Technology. p. 979-983 5 p. (Advanced Materials Research; vol. 314-316).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations

  • Microstructure and wear behavior of SiCp-reinforced magnesium matrix composite by cold spraying

    Suo, X., Guo, X., Li, W., Planche, M. P., Zhang, C. & Liao, H., 2011, Advanced Manufacturing Technology. p. 253-258 6 p. (Advanced Materials Research; vol. 314-316).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Nonuniformity of mechanical property in the weld zone of friction stir welded 7050 aluminum alloy joint

    Tian, Y. W., Xu, F., Li, W. Y. & Tang, Z. B., 2011, Manufacturing Process Technology. p. 3560-3563 4 p. (Advanced Materials Research; vol. 189-193).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations
  • 2010

    Adaptive and dynamic service composition using Q-learning

    Wang, H., Zhouy, X., Zhou, X., Liu, W. & Li, W., 2010, Proceedings - 22nd International Conference on Tools with Artificial Intelligence, ICTAI 2010. p. 145-152 8 p. 5670027. (Proceedings - International Conference on Tools with Artificial Intelligence, ICTAI; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    25 Scopus citations

  • Adaptive service composition based on reinforcement learning

    Wang, H., Zhou, X., Zhou, X., Liu, W., Li, W. & Bouguettaya, A., 2010, Service-Oriented Computing - 8th International Conference, ICSOC 2010, Proceedings. p. 92-107 16 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 6470 LNCS).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    70 Scopus citations
  • 2009

    Explicit finite element analysis of the plunge stage of tool in friction stir welding

    Li, W. Y., Yu, M., Li, J. & Gao, D., 2009, 10th International Symposium on Eco-Materials Processing and Design, ISEPD 2009. Trans Tech Publications Ltd, p. 233-236 4 p. (Materials Science Forum; vol. 620 622).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    8 Scopus citations

  • Fracture characteristics of vacuum diffusion bonded TA2 titanium to 1Cr18Ni9Ti stainless steel joint with Nb+Ni interlayers

    Li, J. L., Huo, L. P., Zhang, F. S., Xiong, J. T. & Li, W. Y., 2009, 10th International Symposium on Eco-Materials Processing and Design, ISEPD 2009. Trans Tech Publications Ltd, p. 399-402 4 p. (Materials Science Forum; vol. 620 622).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    14 Scopus citations

  • Influence of spray materials and their surface oxidation on the critical velocity in cold spraying

    Li, C. J., Wang, H. T., Zhang, Q., Yang, G. J., Li, W. Y. & Liao, H. L., 2009, Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. p. 342-347 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    1 Scopus citations

  • Modeling aspects of high velocity impact of particles in cold spraying by explicit finite element analysis

    Li, W. Y., Li, C. J. & Liao, H., 2009, Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. p. 432-441 10 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    2 Scopus citations
  • 2008

    Linear friction welding of Ti-6AI-4V alloy: Microstructure characterization

    Ma, T. J., Li, W. Y., Xu, Q. Z., Zhang, Y., Li, J. L. & Yang, S. Q., 2008, Materials Science Forum - Advanced Welding and Micro Joining/Packaging for the 21st Century - Selected peer reviewed papers from the International Welding/Joining Conference-Korea 2007, IWJC 2007. Lee, C. H., Lee, J.-B., Lee, J.-B., Park, D.-H. & Na, S.-J. (eds.). Trans Tech Publications Ltd, p. 405-408 4 p. (Materials Science Forum; vol. 580-582).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    7 Scopus citations
  • 2004

    Characterization of microstructure of nanostructured Fe-Si coating deposited by cold spraying

    Li, C. J., Li, W. Y., Ma, W. H. & Fukanuma, H., 2004, Proceedings of the International Thermal Spray Conference. p. 371-377 7 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations

  • Formation of TiO2 photocatalyst through cold spraying

    Li, C. J., Yang, G. J., Huang, X. C., Li, W. Y. & Ohmori, A., 2004, Proceedings of the International Thermal Spray Conference. p. 315-319 5 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    23 Scopus citations

  • Impact fusion phenomenon during cold spraying of zinc

    Li, C. J., Li, W. Y. & Fukanuma, H., 2004, Proceedings of the International Thermal Spray Conference. p. 335-340 6 p. (Proceedings of the International Thermal Spray Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

    9 Scopus citations