Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution

Qinling Bi; Weimin Liu; Jiqiang Ma; Jun Yang; Yuping Pu; Qunji Xue

doi:10.1016/j.triboint.2009.03.004

Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution

Qinling Bi, Weimin Liu, Jiqiang Ma, Jun Yang, Yuping Pu, Qunji Xue

CAS - Lanzhou Institute of Chemical Physics

科研成果: 期刊稿件 › 文章 › 同行评审

31 引用（Scopus）

摘要

The tribocorrosion property of a Ni-17.5Si-29.3Cr alloy against a Si₃N₄ ball was studied in comparison with AISI321 stainless steel using a ball-on-disk reciprocating tribotester in 1 M sulfuric acid (H₂SO₄) solution. The effects of load and sliding speed on the tribocorrosion properties of the alloy were investigated. The results indicated that the wear rate of the alloy increased while the friction coefficient decreased with increasing load. The wear rate of the alloy increased linearly with increasing sliding speed and the friction coefficient increased in the initial stages and then remained constant with increasing sliding speed. The wear mechanisms were mainly microploughing, uniform corrosion and pitting corrosion. Under the experimental conditions of the present study, the Ni-17.5Si-29.3Cr alloy showed excellent corrosion-resistence and anti-wear ability compared with AISI321 stainless steel.

源语言	英语
页（从-至）	1081-1087
页数	7
期刊	Tribology International
卷	42
期	7
DOI	https://doi.org/10.1016/j.triboint.2009.03.004
出版状态	已出版 - 7月 2009
已对外发布	是

访问文件

10.1016/j.triboint.2009.03.004

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{8dc86ce672b54351a2ef6df93be7cfea,

title = "Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution",

abstract = "The tribocorrosion property of a Ni-17.5Si-29.3Cr alloy against a Si3N4 ball was studied in comparison with AISI321 stainless steel using a ball-on-disk reciprocating tribotester in 1 M sulfuric acid (H2SO4) solution. The effects of load and sliding speed on the tribocorrosion properties of the alloy were investigated. The results indicated that the wear rate of the alloy increased while the friction coefficient decreased with increasing load. The wear rate of the alloy increased linearly with increasing sliding speed and the friction coefficient increased in the initial stages and then remained constant with increasing sliding speed. The wear mechanisms were mainly microploughing, uniform corrosion and pitting corrosion. Under the experimental conditions of the present study, the Ni-17.5Si-29.3Cr alloy showed excellent corrosion-resistence and anti-wear ability compared with AISI321 stainless steel.",

keywords = "HSO, Ni-17.5Si-29.3Cr alloy, Tribocorrosion, Wear",

author = "Qinling Bi and Weimin Liu and Jiqiang Ma and Jun Yang and Yuping Pu and Qunji Xue",

year = "2009",

month = jul,

doi = "10.1016/j.triboint.2009.03.004",

language = "英语",

volume = "42",

pages = "1081--1087",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

number = "7",

}

TY - JOUR

T1 - Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution

AU - Bi, Qinling

AU - Liu, Weimin

AU - Ma, Jiqiang

AU - Yang, Jun

AU - Pu, Yuping

AU - Xue, Qunji

PY - 2009/7

Y1 - 2009/7

N2 - The tribocorrosion property of a Ni-17.5Si-29.3Cr alloy against a Si3N4 ball was studied in comparison with AISI321 stainless steel using a ball-on-disk reciprocating tribotester in 1 M sulfuric acid (H2SO4) solution. The effects of load and sliding speed on the tribocorrosion properties of the alloy were investigated. The results indicated that the wear rate of the alloy increased while the friction coefficient decreased with increasing load. The wear rate of the alloy increased linearly with increasing sliding speed and the friction coefficient increased in the initial stages and then remained constant with increasing sliding speed. The wear mechanisms were mainly microploughing, uniform corrosion and pitting corrosion. Under the experimental conditions of the present study, the Ni-17.5Si-29.3Cr alloy showed excellent corrosion-resistence and anti-wear ability compared with AISI321 stainless steel.

AB - The tribocorrosion property of a Ni-17.5Si-29.3Cr alloy against a Si3N4 ball was studied in comparison with AISI321 stainless steel using a ball-on-disk reciprocating tribotester in 1 M sulfuric acid (H2SO4) solution. The effects of load and sliding speed on the tribocorrosion properties of the alloy were investigated. The results indicated that the wear rate of the alloy increased while the friction coefficient decreased with increasing load. The wear rate of the alloy increased linearly with increasing sliding speed and the friction coefficient increased in the initial stages and then remained constant with increasing sliding speed. The wear mechanisms were mainly microploughing, uniform corrosion and pitting corrosion. Under the experimental conditions of the present study, the Ni-17.5Si-29.3Cr alloy showed excellent corrosion-resistence and anti-wear ability compared with AISI321 stainless steel.

KW - HSO

KW - Ni-17.5Si-29.3Cr alloy

KW - Tribocorrosion

KW - Wear

UR - http://www.scopus.com/inward/record.url?scp=67349173966&partnerID=8YFLogxK

U2 - 10.1016/j.triboint.2009.03.004

DO - 10.1016/j.triboint.2009.03.004

M3 - 文章

AN - SCOPUS:67349173966

SN - 0301-679X

VL - 42

SP - 1081

EP - 1087

JO - Tribology International

JF - Tribology International

IS - 7

ER -

Tribocorrosion behavior of Ni-17.5Si-29.3Cr alloy in sulfuric acid solution

摘要

访问文件

其它文件与链接

指纹

引用此