The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition

Fencheng Liu; Jian Gao; Fenggang Liu; Yang Xu; Qifan You; Chunping Huang; Xiaoan Hu; Haizhong Zheng; Xin Lin

doi:10.1016/j.triboint.2023.108835

The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition

Fencheng Liu, Jian Gao, Fenggang Liu, Yang Xu, Qifan You, Chunping Huang, Xiaoan Hu, Haizhong Zheng, Xin Lin

材料学院

Nanchang Hangkong University

科研成果: 期刊稿件 › 文章 › 同行评审

25 引用（Scopus）

摘要

The effect of crystal orientation and heat treatment on microstructure and wear properties of Inconel 718 superalloy fabricated by laser directed energy deposition (LDED) were analyzed and compared with forged samples. Fully heat treated samples presented the lowest wear rate and better resistance to friction compared with other condition samples. The direct aging treated samples also had better wear resistance attributed to its microhardness and microstructure and were mainly abrasive wear with a large amount of wear debris and deeper scratches on the worn surface. As for the anisotropy of microstructure in LDED samples, the wear properties in different crystal orientations were different, and better wear performance was obtained in the section which is vertical to the deposition direction.

源语言	英语
文章编号	108835
期刊	Tribology International
卷	188
DOI	https://doi.org/10.1016/j.triboint.2023.108835
出版状态	已出版 - 10月 2023

访问文件

10.1016/j.triboint.2023.108835

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{beabfd0d88db4c9f85da11905cb6106e,

title = "The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition",

abstract = "The effect of crystal orientation and heat treatment on microstructure and wear properties of Inconel 718 superalloy fabricated by laser directed energy deposition (LDED) were analyzed and compared with forged samples. Fully heat treated samples presented the lowest wear rate and better resistance to friction compared with other condition samples. The direct aging treated samples also had better wear resistance attributed to its microhardness and microstructure and were mainly abrasive wear with a large amount of wear debris and deeper scratches on the worn surface. As for the anisotropy of microstructure in LDED samples, the wear properties in different crystal orientations were different, and better wear performance was obtained in the section which is vertical to the deposition direction.",

keywords = "Anisotropy, Laser directed energy deposition, Ni-based superalloy, Wear property",

author = "Fencheng Liu and Jian Gao and Fenggang Liu and Yang Xu and Qifan You and Chunping Huang and Xiaoan Hu and Haizhong Zheng and Xin Lin",

note = "Publisher Copyright: {\textcopyright} 2023 Elsevier Ltd",

year = "2023",

month = oct,

doi = "10.1016/j.triboint.2023.108835",

language = "英语",

volume = "188",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition

AU - Liu, Fencheng

AU - Gao, Jian

AU - Liu, Fenggang

AU - Xu, Yang

AU - You, Qifan

AU - Huang, Chunping

AU - Hu, Xiaoan

AU - Zheng, Haizhong

AU - Lin, Xin

PY - 2023/10

Y1 - 2023/10

N2 - The effect of crystal orientation and heat treatment on microstructure and wear properties of Inconel 718 superalloy fabricated by laser directed energy deposition (LDED) were analyzed and compared with forged samples. Fully heat treated samples presented the lowest wear rate and better resistance to friction compared with other condition samples. The direct aging treated samples also had better wear resistance attributed to its microhardness and microstructure and were mainly abrasive wear with a large amount of wear debris and deeper scratches on the worn surface. As for the anisotropy of microstructure in LDED samples, the wear properties in different crystal orientations were different, and better wear performance was obtained in the section which is vertical to the deposition direction.

AB - The effect of crystal orientation and heat treatment on microstructure and wear properties of Inconel 718 superalloy fabricated by laser directed energy deposition (LDED) were analyzed and compared with forged samples. Fully heat treated samples presented the lowest wear rate and better resistance to friction compared with other condition samples. The direct aging treated samples also had better wear resistance attributed to its microhardness and microstructure and were mainly abrasive wear with a large amount of wear debris and deeper scratches on the worn surface. As for the anisotropy of microstructure in LDED samples, the wear properties in different crystal orientations were different, and better wear performance was obtained in the section which is vertical to the deposition direction.

KW - Anisotropy

KW - Laser directed energy deposition

KW - Ni-based superalloy

KW - Wear property

UR - http://www.scopus.com/inward/record.url?scp=85166587818&partnerID=8YFLogxK

U2 - 10.1016/j.triboint.2023.108835

DO - 10.1016/j.triboint.2023.108835

M3 - 文章

AN - SCOPUS:85166587818

SN - 0301-679X

VL - 188

JO - Tribology International

JF - Tribology International

M1 - 108835

ER -

The anisotropic wear and friction property of Inconel 718 superalloy fabricated by laser directed energy deposition

摘要

访问文件

其它文件与链接

指纹

引用此