Study on Residual Stress in Disc-Milling Grooving of Blisks

Hongmin Xin, Taotao Xing, Hui Dai, Jian Zhang, Changfeng Yao, Minchao Cui, Qinggui Zhang

科研成果: 期刊稿件文章同行评审

5 引用 (Scopus)

摘要

The disc-milling method is expected to increase the grooving efficiency of blisks. However, there are few studies about the residual stress on a blisk during disc-milling grooving. In this study, a single-factor experiment and an orthogonal experiment of blisk disc-milling and grooving were designed to obtain the residual stress. Surface subsurface residual stress were also studied. The results showed that the surface of the milling groove bore compressive stress. Residual stress decreased with increasing spindle speed and increased with increasing feed speed and spindle rotation angle. Moreover, residual stress was most sensitive to spindle rotation angle and least sensitive to feed speed. A higher residual stress produced on the machined surface led to a deeper layer of residual stress.

源语言英语
文章编号7261
期刊Materials
15
20
DOI
出版状态已出版 - 10月 2022

指纹

探究 'Study on Residual Stress in Disc-Milling Grooving of Blisks' 的科研主题。它们共同构成独一无二的指纹。

引用此