@inproceedings{4521957d6a69476a97ced1364e8dadc1,
title = "Research on the curvature radius of roller-trace in the forming process of conventional spinning",
abstract = "Based on the 3D FE model of conventional spinning, the influence of curvature radius of roller-trace on the conventional spinning process has been studied. It is found that when the curvature radius of roller-trace is smaller, the maximum of thinning rate and hoop compressive stress increases dramatically with the increasing of the radius, and curvature radius does little effect on the forming process when it is up to a critical value. To obtain a more reasonable selection criterion of curvature radius of roller-trace, a new index named flange width has been put forward, which represents the comprehensive effect of workpiece diameter and mandrel diameter in the forming process of conventional spinning. Further research has been done and the selection criterion of curvature radius is obtained: the smaller the flange width is or the larger the workpiece thickness or the entry tangential angle is, the larger the range of reasonable curvature radius is.",
keywords = "ABAQUS/explicit, Conventional spinning, Curvature radius of roller-trace, FEM",
author = "Ma Fei and He Yang and Mei Zhan",
year = "2006",
doi = "10.4028/www.scientific.net/msf.532-533.277",
language = "英语",
isbn = "0878494219",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "277--280",
editor = "Chengyu Jiang and Geng Liu and Dinghua Zhang and Xipeng Xu",
booktitle = "Advances in Materials Manufacturing Science and Technology II - Selected Papers from the 12th International Manufacturing Conference in China",
note = "12th International Manufacturing Conference in China, IMCC2006 ; Conference date: 21-09-2006 Through 23-09-2006",
}