Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy

Z. Yang; Y. C. Guo; J. P. Li; F. He; F. Xia; M. X. Liang

doi:10.1016/j.msea.2007.08.069

Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy

Z. Yang, Y. C. Guo, J. P. Li, F. He, F. Xia, M. X. Liang

Xi'an Technological University

科研成果: 期刊稿件 › 文章 › 同行评审

128 引用（Scopus）

摘要

A newly developed magnesium alloy Mg-5Gd-4Y-0.5Zn-0.5Zr (GWZ540) was hot extruded and then compressed at temperatures between 573 and 673 K and strain rates ranging from 2 × 10^-4 to 2 × 10^-1 s^-1. The stress-strain behaviors and volume fraction of dynamic recrystallized (DRX) grains were determined. It is shown that the form of the flow stress curves is sensitive to temperature and strain rate and DRX mechanisms of the alloy varied as deformation progresses. High density dislocation was formed at boundaries of coarse grains and around some particles of second phase at first. Dislocation cell walls then were formed and converted into subgrain boundaries. New recrystallized grains were formed finally at the base of subgrain boundaries and particles of second phase.

源语言	英语
页（从-至）	487-491
页数	5
期刊	Materials Science and Engineering: A
卷	485
期	1-2
DOI	https://doi.org/10.1016/j.msea.2007.08.069
出版状态	已出版 - 25 6月 2008
已对外发布	是

访问文件

10.1016/j.msea.2007.08.069

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{3bef65aeda92402f8a5d37a18433549c,

title = "Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy",

abstract = "A newly developed magnesium alloy Mg-5Gd-4Y-0.5Zn-0.5Zr (GWZ540) was hot extruded and then compressed at temperatures between 573 and 673 K and strain rates ranging from 2 × 10-4 to 2 × 10-1 s-1. The stress-strain behaviors and volume fraction of dynamic recrystallized (DRX) grains were determined. It is shown that the form of the flow stress curves is sensitive to temperature and strain rate and DRX mechanisms of the alloy varied as deformation progresses. High density dislocation was formed at boundaries of coarse grains and around some particles of second phase at first. Dislocation cell walls then were formed and converted into subgrain boundaries. New recrystallized grains were formed finally at the base of subgrain boundaries and particles of second phase.",

keywords = "Deformation, Dynamic recrystallization, Mg alloy, Mg-5Gd-4Y-0.5Zn-0.5Zr, Microstructure evolution",

author = "Z. Yang and Guo, {Y. C.} and Li, {J. P.} and F. He and F. Xia and Liang, {M. X.}",

year = "2008",

month = jun,

day = "25",

doi = "10.1016/j.msea.2007.08.069",

language = "英语",

volume = "485",

pages = "487--491",

journal = "Materials Science and Engineering: A",

issn = "0921-5093",

publisher = "Elsevier Ltd",

number = "1-2",

}

TY - JOUR

T1 - Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy

AU - Yang, Z.

AU - Guo, Y. C.

AU - Li, J. P.

AU - He, F.

AU - Xia, F.

AU - Liang, M. X.

PY - 2008/6/25

Y1 - 2008/6/25

N2 - A newly developed magnesium alloy Mg-5Gd-4Y-0.5Zn-0.5Zr (GWZ540) was hot extruded and then compressed at temperatures between 573 and 673 K and strain rates ranging from 2 × 10-4 to 2 × 10-1 s-1. The stress-strain behaviors and volume fraction of dynamic recrystallized (DRX) grains were determined. It is shown that the form of the flow stress curves is sensitive to temperature and strain rate and DRX mechanisms of the alloy varied as deformation progresses. High density dislocation was formed at boundaries of coarse grains and around some particles of second phase at first. Dislocation cell walls then were formed and converted into subgrain boundaries. New recrystallized grains were formed finally at the base of subgrain boundaries and particles of second phase.

AB - A newly developed magnesium alloy Mg-5Gd-4Y-0.5Zn-0.5Zr (GWZ540) was hot extruded and then compressed at temperatures between 573 and 673 K and strain rates ranging from 2 × 10-4 to 2 × 10-1 s-1. The stress-strain behaviors and volume fraction of dynamic recrystallized (DRX) grains were determined. It is shown that the form of the flow stress curves is sensitive to temperature and strain rate and DRX mechanisms of the alloy varied as deformation progresses. High density dislocation was formed at boundaries of coarse grains and around some particles of second phase at first. Dislocation cell walls then were formed and converted into subgrain boundaries. New recrystallized grains were formed finally at the base of subgrain boundaries and particles of second phase.

KW - Deformation

KW - Dynamic recrystallization

KW - Mg alloy

KW - Mg-5Gd-4Y-0.5Zn-0.5Zr

KW - Microstructure evolution

UR - http://www.scopus.com/inward/record.url?scp=42149090563&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2007.08.069

DO - 10.1016/j.msea.2007.08.069

M3 - 文章

AN - SCOPUS:42149090563

SN - 0921-5093

VL - 485

SP - 487

EP - 491

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

IS - 1-2

ER -

Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy

摘要

访问文件

其它文件与链接

指纹

引用此