Modelling of ultrasonic vibration-assisted forming considering the distribution of ultrasonic field with structure deformation

Ultrasonic vibration-assisted (UVA) forming is typically used to promote the forming quality of complex structures due to the acoustic-plastic effect. Ultrasonic vibration (UV) is always applied via the contact of tools with the structure surface; thus a distribution of ultrasonic field exists owing to the propagation and attenuation of ultrasonic waves, which may vary with structural deformation. This makes the prediction and control of ultrasonic effect extremely difficult in achieving high forming quality. To develop a new coupling model considering the interaction between ultrasonic field and deformation field, UVA tensile experiments of superalloy sheet were performed first. The experimental results demonstrated that UV had a local effect on the tensile specimen, resulting in non-uniform distribution of temperature, strain and dislocation density. During the modelling, the intensity of ultrasonic field was quantified by acoustic energy density, which can be calculated using vibration velocity. A dislocation-based constitutive relation was also established, in which ultrasonic-related functions were introduced to reflect the effect of ultrasonic field on structural deformation. Then, a sequential coupling modelling method was proposed. Through the cyclic calculation of ultrasonic field and deformation field, the simulation of UVA forming considering the distribution of ultrasonic field with structure deformation was realised. With the coupling model, the non-uniform distribution of deformation accompanied by a non-uniform ultrasonic field during UVA forming was revealed. When applied to a complex W-bending process, the targeted softening effect on the W-bending specimen was precisely predicted. The coupling model is expected to lay a foundation for the optimisation and control of the UVA forming process.