Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes

Xueli Wang, Fuguo Li, Tianyu Xu, Xinkai Ma, Botong Hou, Liang Luo, Bang Liu

科研成果: 期刊稿件文章同行评审

16 引用 (Scopus)

摘要

Microstructure and microhardness evolution of a metastable Ti-10V-2Fe-3Al (Ti-1023) alloy were systematically investigated under uniaxial tension (UT), single torsion (ST), and simultaneous tension-torsion (STT) deformation at ambient temperature. The results show that stress-induced α″ martensite transformation has been activated which its volume fraction depends heavily on the deformation modes. There are groups of α″ structures with various morphology generated from the grain boundaries of separate β grains, which long strip-like and block-shaped structures after UT, zig-zag, needle-shaped, and block-shaped structures after ST, a combination of zig-zag, needle-shaped, block-shaped, and strip-shaped structures after STT were observed. Moreover, there is an apparent dynamic grain refinement and accumulation of geometrically necessary dislocations (GNDs) by UT, ST and STT deformation, and STT deformation mode is more conducive to the two effects. The average Vickers microhardness of as-received, UT, ST, and STT samples are ~295 HV, ~311 HV, ~324 HV, and ~351 HV. It is closely related to the dynamic grain refinement caused by the TRIP effect and GNDs accumulated.

源语言英语
文章编号160484
期刊Journal of Alloys and Compounds
881
DOI
出版状态已出版 - 10 11月 2021

指纹

探究 'Microstructure and microhardness evolution of Ti-10V-2Fe-3Al alloy under tensile/torsional deformation modes' 的科研主题。它们共同构成独一无二的指纹。

引用此