Microstructural Evolution and the Irradiation Sensitivity of Different Phases of a High Nb-Containing TiAl Alloy under He Ions Implantation at Room-and Elevated Temperatures

A high Nb-containing TiAl alloy Ti-45Al-8.5Nb-(W, B, Y) with nearly lamellar micro-structure has been irradiated by 200 kV He²⁺ to a fluence of 1 × 10²¹ ions/m² with a dose of about 1.1 dpa at 298 K and 773 K in this work. It is found that an amorphous layer formed on the surface, and no helium bubbles can be observed in the alloy after room temperature ion implantation. The surface roughness of the alloy increases significantly with the bombardment of helium ions, indi-cating that the ion implantation increases the surface defects. The high-temperature ion implantation leads to the phenomenon of blistering on the alloy surface, and helium bubbles are observed in both α2 and γ phases of the alloy irradiated at 773 K. The average size of the helium bubbles in the α2 (15~20 nm) is larger than that in the γ (3~5 nm) phase, while the helium bubble density is opposite. Moreover, the growth mechanism of helium bubble is also investigated. By means of nanoindentation, an obvious irradiation hardening phenomenon is measured after the room temperature ion implantation. In addition, the irradiation sensitivity of different phases is also dis-cussed in this work. The results show that the γ phase has the highest irradiation sensitivity, α2 phase second, β phase minimum. The results of this work, especially microstructure evolution and the evaluation of phase-related irradiation sensitivity during ion implantation, can be expected to provide experimental evidence for the applications of TiAl intermetallic compounds in the nuclear industries.