TY - GEN
T1 - Manufacturing process for circular-arc curvilinear cylindrical gears with predesigned fourth order transmission error
AU - Su, Jinzhan
AU - Fang, Zongde
PY - 2010
Y1 - 2010
N2 - A fourth order transmission error was employed to improve the stability and tooth strength of circular-arc curvilinear cylindrical gears. The coefficient of fourth order polynomial curve was determined, the imaginary rack cutter which formed by the rotation of a head cutter and the imaginary pinion were introduced to determine the pinion and gear tooth surfaces, respectively. The numerical simulation of meshing shows: 1) the fourth order transmission error can be achieved by the proposed method; 2) the stability transmission can be performed by increasing the angle of the transfer point of the cycle of meshing; 3) the tooth fillet strength can be enhanced.
AB - A fourth order transmission error was employed to improve the stability and tooth strength of circular-arc curvilinear cylindrical gears. The coefficient of fourth order polynomial curve was determined, the imaginary rack cutter which formed by the rotation of a head cutter and the imaginary pinion were introduced to determine the pinion and gear tooth surfaces, respectively. The numerical simulation of meshing shows: 1) the fourth order transmission error can be achieved by the proposed method; 2) the stability transmission can be performed by increasing the angle of the transfer point of the cycle of meshing; 3) the tooth fillet strength can be enhanced.
KW - Assembly errors
KW - Circular-arc curvilinear cylindrical gear
KW - Fourth order transmission error
KW - Tooth surface generation
UR - http://www.scopus.com/inward/record.url?scp=78650878715&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMM.37-38.623
DO - 10.4028/www.scientific.net/AMM.37-38.623
M3 - 会议稿件
AN - SCOPUS:78650878715
SN - 9780878492220
T3 - Applied Mechanics and Materials
SP - 623
EP - 627
BT - Advances in Engineering Design and Optimization
T2 - International Conference on Engineering Design and Optimization, ICEDO 2010
Y2 - 28 October 2010 through 30 October 2010
ER -