Laser sintering of copper-matrix powder materials

Zuoxing Guo; Jiandong Hu; Qingfeng Guan; Yulong Li

Laser sintering of copper-matrix powder materials

Zuoxing Guo, Jiandong Hu, Qingfeng Guan, Yulong Li

Jilin University

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

A CO₂ laser was used to sinter the copper-matrix green compact, interdiffusion of elements occurred, forming the novel phases such as ε and η which could hardly be seen by conventional sintering. The properties of sintered material were measured, the results are that density, wear resistance and impact toughness are much higher than the conventional sintering.

源语言	英语
页（从-至）	119-121
页数	3
期刊	Yingyong Jiguang/Applied Laser Technology
卷	17
期	3
出版状态	已出版 - 6月 1997
已对外发布	是

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{3547daee0e1a4b06b2a7a5e0d53e5963,

title = "Laser sintering of copper-matrix powder materials",

abstract = "A CO2 laser was used to sinter the copper-matrix green compact, interdiffusion of elements occurred, forming the novel phases such as ε and η which could hardly be seen by conventional sintering. The properties of sintered material were measured, the results are that density, wear resistance and impact toughness are much higher than the conventional sintering.",

author = "Zuoxing Guo and Jiandong Hu and Qingfeng Guan and Yulong Li",

year = "1997",

month = jun,

language = "英语",

volume = "17",

pages = "119--121",

journal = "Yingyong Jiguang/Applied Laser Technology",

issn = "1000-372X",

publisher = "Shanghai Scientific and Technical Publishers",

number = "3",

}

TY - JOUR

T1 - Laser sintering of copper-matrix powder materials

AU - Guo, Zuoxing

AU - Hu, Jiandong

AU - Guan, Qingfeng

AU - Li, Yulong

PY - 1997/6

Y1 - 1997/6

N2 - A CO2 laser was used to sinter the copper-matrix green compact, interdiffusion of elements occurred, forming the novel phases such as ε and η which could hardly be seen by conventional sintering. The properties of sintered material were measured, the results are that density, wear resistance and impact toughness are much higher than the conventional sintering.

AB - A CO2 laser was used to sinter the copper-matrix green compact, interdiffusion of elements occurred, forming the novel phases such as ε and η which could hardly be seen by conventional sintering. The properties of sintered material were measured, the results are that density, wear resistance and impact toughness are much higher than the conventional sintering.

UR - http://www.scopus.com/inward/record.url?scp=0031152286&partnerID=8YFLogxK

M3 - 文章

AN - SCOPUS:0031152286

SN - 1000-372X

VL - 17

SP - 119

EP - 121

JO - Yingyong Jiguang/Applied Laser Technology

JF - Yingyong Jiguang/Applied Laser Technology

IS - 3

ER -

Laser sintering of copper-matrix powder materials

摘要

其它文件与链接

指纹

引用此