Investigations on microstructure and properties of five TiZr-based refractory multi-principal element alloys for clinical metallic biomaterials

The development of new materials with high strength, ductility, low modulus, wear resistance, and good biocompatibility remains a requirement in the field of clinical biomaterials. Based on the concept of high-entropy alloys, five TiZr-based refractory multi-principal element alloys (RMPEAs), i.e. MoTiZr, NbTiZr, MoTiVZr, NbTiVZr, and NbMoTiZr were designed and their microstructure, mechanical properties, elastic properties, and biocompatibility were assessed in this study. Results indicate that NbTiZr and NbTiVZr RMPEAs are single-phase BCC alloys, while the other alloys exhibit multiphase structures. In terms of mechanical behaviors, NbMoTiZr RMPEA has the highest hardness (496±15 HV) among the five alloys and also combines a high yield strength and good ductility, with values of 1275 MPa and 21.66%, respectively. According to atomic calculations, the ideal shear strengths of the five alloys on the {110} plane are all lower than those on the {112} plane. Furthermore, NbMoTiZr RMPEA also exhibits a lower Young's modulus than that of Ti6Al4V, which can reduce “stress shielding” effects. The in vitro biocompatibility evaluation revealed that NbMoTiZr RMPEA can support cell adhesion and proliferation of MC3T3-E1 cells and exhibits good biocompatibility comparable to Ti6Al4V. These results demonstrate the remarkable potential of NbMoTiZr RMPEA for orthopedic bioimplant applications.