Influence of cooling rate on phase transformation of TC21 alloy

Yi Hong Wang; Hong Chao Kou; Zhi Shou Zhu; Hui Chang; Lian Zhou; Jin Shan Li

doi:10.3969/j.issn.1005-5053.2010.1.002

Influence of cooling rate on phase transformation of TC21 alloy

Yi Hong Wang, Hong Chao Kou, Zhi Shou Zhu, Hui Chang, Lian Zhou, Jin Shan Li

材料学院

科研成果: 期刊稿件 › 文章 › 同行评审

8 引用（Scopus）

摘要

The effects of cooling rates from elevated temperature on phase transformations in TC21 alloy were investigated by using end quenching. Samples from different regions (cooling rates) were analyzed by using optical micrograph (0M), Xray diffractometry (XRD), transmission electron microscopy (TEM), and Vickers microhardness. The results show that cooling rates above 122°C/s result in a martensitic transformation, a massive transformation being observed between 122 and 3°C/s, this transformation being gradually replaced by diffusion controlled Widmanst?tten α formation with decreasing cooling rate. These α layers was of two types, type 1 having a smoother appearance, type 2 having a zig-zagged appearance. With the cooling rates decreasing, the microhardness of TC21 alloy decreased after increased. When the cooling rates was smaller than 8°C/s, the microhardness of TC21 alloy decreased dramatically.

源语言	英语
页（从-至）	6-10
页数	5
期刊	Hangkong Cailiao Xuebao/Journal of Aeronautical Materials
卷	30
期	1
DOI	https://doi.org/10.3969/j.issn.1005-5053.2010.1.002
出版状态	已出版 - 2月 2010

访问文件

10.3969/j.issn.1005-5053.2010.1.002

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{535cd6d4b03843e086afd6d984e53b41,

title = "Influence of cooling rate on phase transformation of TC21 alloy",

abstract = "The effects of cooling rates from elevated temperature on phase transformations in TC21 alloy were investigated by using end quenching. Samples from different regions (cooling rates) were analyzed by using optical micrograph (0M), Xray diffractometry (XRD), transmission electron microscopy (TEM), and Vickers microhardness. The results show that cooling rates above 122°C/s result in a martensitic transformation, a massive transformation being observed between 122 and 3°C/s, this transformation being gradually replaced by diffusion controlled Widmanst?tten α formation with decreasing cooling rate. These α layers was of two types, type 1 having a smoother appearance, type 2 having a zig-zagged appearance. With the cooling rates decreasing, the microhardness of TC21 alloy decreased after increased. When the cooling rates was smaller than 8°C/s, the microhardness of TC21 alloy decreased dramatically.",

keywords = "End quenching, Microhardness, Phase transformation, TC21 titanium alloy",

author = "Wang, {Yi Hong} and Kou, {Hong Chao} and Zhu, {Zhi Shou} and Hui Chang and Lian Zhou and Li, {Jin Shan}",

year = "2010",

month = feb,

doi = "10.3969/j.issn.1005-5053.2010.1.002",

language = "英语",

volume = "30",

pages = "6--10",

journal = "Hangkong Cailiao Xuebao/Journal of Aeronautical Materials",

issn = "1005-5053",

publisher = "Science Press ",

number = "1",

}

TY - JOUR

T1 - Influence of cooling rate on phase transformation of TC21 alloy

AU - Wang, Yi Hong

AU - Kou, Hong Chao

AU - Zhu, Zhi Shou

AU - Chang, Hui

AU - Zhou, Lian

AU - Li, Jin Shan

PY - 2010/2

Y1 - 2010/2

N2 - The effects of cooling rates from elevated temperature on phase transformations in TC21 alloy were investigated by using end quenching. Samples from different regions (cooling rates) were analyzed by using optical micrograph (0M), Xray diffractometry (XRD), transmission electron microscopy (TEM), and Vickers microhardness. The results show that cooling rates above 122°C/s result in a martensitic transformation, a massive transformation being observed between 122 and 3°C/s, this transformation being gradually replaced by diffusion controlled Widmanst?tten α formation with decreasing cooling rate. These α layers was of two types, type 1 having a smoother appearance, type 2 having a zig-zagged appearance. With the cooling rates decreasing, the microhardness of TC21 alloy decreased after increased. When the cooling rates was smaller than 8°C/s, the microhardness of TC21 alloy decreased dramatically.

AB - The effects of cooling rates from elevated temperature on phase transformations in TC21 alloy were investigated by using end quenching. Samples from different regions (cooling rates) were analyzed by using optical micrograph (0M), Xray diffractometry (XRD), transmission electron microscopy (TEM), and Vickers microhardness. The results show that cooling rates above 122°C/s result in a martensitic transformation, a massive transformation being observed between 122 and 3°C/s, this transformation being gradually replaced by diffusion controlled Widmanst?tten α formation with decreasing cooling rate. These α layers was of two types, type 1 having a smoother appearance, type 2 having a zig-zagged appearance. With the cooling rates decreasing, the microhardness of TC21 alloy decreased after increased. When the cooling rates was smaller than 8°C/s, the microhardness of TC21 alloy decreased dramatically.

KW - End quenching

KW - Microhardness

KW - Phase transformation

KW - TC21 titanium alloy

UR - http://www.scopus.com/inward/record.url?scp=77949883178&partnerID=8YFLogxK

U2 - 10.3969/j.issn.1005-5053.2010.1.002

DO - 10.3969/j.issn.1005-5053.2010.1.002

M3 - 文章

AN - SCOPUS:77949883178

SN - 1005-5053

VL - 30

SP - 6

EP - 10

JO - Hangkong Cailiao Xuebao/Journal of Aeronautical Materials

JF - Hangkong Cailiao Xuebao/Journal of Aeronautical Materials

IS - 1

ER -

Influence of cooling rate on phase transformation of TC21 alloy

摘要

访问文件

其它文件与链接

指纹

引用此