High temperature deformation behaviour of Ti-5Al-5Mo-5V-3Cr during thermomechanical processing

K. Hua; X. Y. Xue; H. C. Kou; J. K. Fan; B. Tang; J. S. Li

doi:10.1179/1432891714Z.000000000677

High temperature deformation behaviour of Ti-5Al-5Mo-5V-3Cr during thermomechanical processing

K. Hua, X. Y. Xue, H. C. Kou, J. K. Fan, B. Tang, J. S. Li

材料学院

Northwestern Polytechnical University Xian

科研成果: 期刊稿件 › 文章 › 同行评审

9 引用（Scopus）

摘要

The flow stress behaviour of Ti-5553 titanium alloy during hot compression deformation was studied by thermal simulation test at the deformation temperature of 750-900°C and the strain rate of 0·001-0·1 s^-1 on the Gleeble-3500 thermal and mechanical simulator. The results show that the flow stress was controlled by both strain rate and deformation temperature. The flow stress decreased with the increasing deformation temperature, and increased with the increasing strain rate until the flow stress reached the peak value, then the flow stress remained constant. The flow behaviours were described by hyperbolic sine constitutive equation, and the average activation energy was calculated. Meanwhile the dynamic recrystallisation phenomenon has been observed during hot deformation.

源语言	英语
页（从-至）	S4202-S4206
期刊	Materials Research Innovations
卷	18
DOI	https://doi.org/10.1179/1432891714Z.000000000677
出版状态	已出版 - 1 7月 2014

访问文件

10.1179/1432891714Z.000000000677

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{979393a84aa94cc587fd0c51cdeb954e,

title = "High temperature deformation behaviour of Ti-5Al-5Mo-5V-3Cr during thermomechanical processing",

abstract = "The flow stress behaviour of Ti-5553 titanium alloy during hot compression deformation was studied by thermal simulation test at the deformation temperature of 750-900°C and the strain rate of 0·001-0·1 s-1 on the Gleeble-3500 thermal and mechanical simulator. The results show that the flow stress was controlled by both strain rate and deformation temperature. The flow stress decreased with the increasing deformation temperature, and increased with the increasing strain rate until the flow stress reached the peak value, then the flow stress remained constant. The flow behaviours were described by hyperbolic sine constitutive equation, and the average activation energy was calculated. Meanwhile the dynamic recrystallisation phenomenon has been observed during hot deformation.",

keywords = "Activation energy, Flow stress, Hot deformation, Ti-5553 titanium alloy",

author = "K. Hua and Xue, {X. Y.} and Kou, {H. C.} and Fan, {J. K.} and B. Tang and Li, {J. S.}",

note = "Publisher Copyright: {\textcopyright} W. S. Maney & Son Ltd. 2014.",

year = "2014",

month = jul,

day = "1",

doi = "10.1179/1432891714Z.000000000677",

language = "英语",

volume = "18",

pages = "S4202--S4206",

journal = "Materials Research Innovations",

issn = "1432-8917",

publisher = "Maney Publishing",

}

TY - JOUR

T1 - High temperature deformation behaviour of Ti-5Al-5Mo-5V-3Cr during thermomechanical processing

AU - Hua, K.

AU - Xue, X. Y.

AU - Kou, H. C.

AU - Fan, J. K.

AU - Tang, B.

AU - Li, J. S.

PY - 2014/7/1

Y1 - 2014/7/1

N2 - The flow stress behaviour of Ti-5553 titanium alloy during hot compression deformation was studied by thermal simulation test at the deformation temperature of 750-900°C and the strain rate of 0·001-0·1 s-1 on the Gleeble-3500 thermal and mechanical simulator. The results show that the flow stress was controlled by both strain rate and deformation temperature. The flow stress decreased with the increasing deformation temperature, and increased with the increasing strain rate until the flow stress reached the peak value, then the flow stress remained constant. The flow behaviours were described by hyperbolic sine constitutive equation, and the average activation energy was calculated. Meanwhile the dynamic recrystallisation phenomenon has been observed during hot deformation.

AB - The flow stress behaviour of Ti-5553 titanium alloy during hot compression deformation was studied by thermal simulation test at the deformation temperature of 750-900°C and the strain rate of 0·001-0·1 s-1 on the Gleeble-3500 thermal and mechanical simulator. The results show that the flow stress was controlled by both strain rate and deformation temperature. The flow stress decreased with the increasing deformation temperature, and increased with the increasing strain rate until the flow stress reached the peak value, then the flow stress remained constant. The flow behaviours were described by hyperbolic sine constitutive equation, and the average activation energy was calculated. Meanwhile the dynamic recrystallisation phenomenon has been observed during hot deformation.

KW - Activation energy

KW - Flow stress

KW - Hot deformation

KW - Ti-5553 titanium alloy

UR - http://www.scopus.com/inward/record.url?scp=84907833591&partnerID=8YFLogxK

U2 - 10.1179/1432891714Z.000000000677

DO - 10.1179/1432891714Z.000000000677

M3 - 文章

AN - SCOPUS:84907833591

SN - 1432-8917

VL - 18

SP - S4202-S4206

JO - Materials Research Innovations

JF - Materials Research Innovations

ER -

High temperature deformation behaviour of Ti-5Al-5Mo-5V-3Cr during thermomechanical processing

摘要

访问文件

其它文件与链接

指纹

引用此