@inproceedings{57b6c191f9a843119affdd52d65b68b4,
title = "Experimental research on surface roughness and topography of aluminum alloy 7055 under high-speed milling",
abstract = "This study focuses on optimizing high-speed milling parameters to minimize surface roughness (Ra). High-speed milling experiments were conducted on aluminum alloy 7055 specimens prepared by five levels and four factors. The influence of milling speed, feed per tooth, milling depth and milling width on surface roughness were investigated. Detailed 3D surface topography was observed to analyze the mechanism of milling parameters on surface roughness. Results of this study indicate that the surface roughness increases gradually with the increase of feed per tooth and milling width; it decreases gradually with milling speed increasing; and the milling depth has little influence on surface roughness. The influence of feed per tooth on surface topography was more significant than that of milling speed. Appropriately by selecting processing parameters, the minimum surface roughness 0.17μm can be obtained.",
keywords = "Aluminum alloy, High-speed milling, Surface roughness, Surface topography",
author = "Yao, {Chang Feng} and Liang Tan and Wei Zuo and Zhang, {Ding Hua}",
year = "2013",
doi = "10.4028/www.scientific.net/AMM.328.916",
language = "英语",
isbn = "9783037857120",
series = "Applied Mechanics and Materials",
pages = "916--920",
booktitle = "Mechanical Science and Engineering III",
note = "2013 3rd International Conference on Mechanical Science and Engineering, ICMSE 2013 ; Conference date: 01-03-2013 Through 03-03-2013",
}