TY - JOUR
T1 - Experimental Investigation of the Effect of Microstructure on Coalbed Methane Adsorption Characteristics Affected by Chemical Solvents
AU - Zheng, Chunshan
AU - Liu, Shuaili
AU - Han, Feilin
AU - Jiang, Bingyou
AU - Zhao, Yang
AU - Chen, Zhongwei
N1 - Publisher Copyright:
© 2025 American Chemical Society.
PY - 2025/1/14
Y1 - 2025/1/14
N2 - Coalbed methane (CBM) reservoir modification based on chemical solvent treatment could change the coal microstructure, which further affects the adsorption capacity and flow characteristics of this clean energy. Coal samples were extracted by tetrahydrofuran (THF), carbon disulfide (CS2), and hydrochloric acid (HCl). Low-pressure nitrogen adsorption, carbon dioxide adsorption, Fourier transform infrared spectroscopy, and methane isothermal adsorption test were adopted. The variations of pore structure and chemical composition in coal were evaluated by density functional theory, Barrett-Joyner-Halenda model, and peak fitting method, and their impacts on methane adsorption characteristics were studied. Results show that (1) the micropores less than 2 nm show a bimodal distribution. After acidification, micropore specific surface areas of coal samples I and II increase by 16.79% and 11.72%, respectively, while that of coal sample III-HCl decreases by 4.29% closely related to carbonate and silicate minerals in coal. Microporous specific surface areas of sample II-CS2 and III-CS2 affected by solvent rise by 4.28% and 4.17%, respectively. (2) Among the three original coal samples, the highest level of OH-OH hydrogen bonds content is observed. Solvents have a tendency to interact with −CH2 groups, which shorten the length of fat chains and increase the number of branched chains. THF tends to dissolve C-O-C groups and carbonyl C═O groups. Following CS2 treatment, samples II and III show 38.42% and 47.76% decrease in aromatic C═C area, respectively. (3) The methane adsorption capability in three coal samples is I > III > II. Except for sample I-HCl and sample III-THF, other coal samples have a lower methane adsorption capability than raw coal. Methane adsorption is reduced not just by a decrease in the number of micropores but also by aliphatic groups, aromatic structures, and oxygen-containing structures. Relevant results could deliver guiding significance for understanding methane adsorption and flow characteristics in coal after chemical solvent modification.
AB - Coalbed methane (CBM) reservoir modification based on chemical solvent treatment could change the coal microstructure, which further affects the adsorption capacity and flow characteristics of this clean energy. Coal samples were extracted by tetrahydrofuran (THF), carbon disulfide (CS2), and hydrochloric acid (HCl). Low-pressure nitrogen adsorption, carbon dioxide adsorption, Fourier transform infrared spectroscopy, and methane isothermal adsorption test were adopted. The variations of pore structure and chemical composition in coal were evaluated by density functional theory, Barrett-Joyner-Halenda model, and peak fitting method, and their impacts on methane adsorption characteristics were studied. Results show that (1) the micropores less than 2 nm show a bimodal distribution. After acidification, micropore specific surface areas of coal samples I and II increase by 16.79% and 11.72%, respectively, while that of coal sample III-HCl decreases by 4.29% closely related to carbonate and silicate minerals in coal. Microporous specific surface areas of sample II-CS2 and III-CS2 affected by solvent rise by 4.28% and 4.17%, respectively. (2) Among the three original coal samples, the highest level of OH-OH hydrogen bonds content is observed. Solvents have a tendency to interact with −CH2 groups, which shorten the length of fat chains and increase the number of branched chains. THF tends to dissolve C-O-C groups and carbonyl C═O groups. Following CS2 treatment, samples II and III show 38.42% and 47.76% decrease in aromatic C═C area, respectively. (3) The methane adsorption capability in three coal samples is I > III > II. Except for sample I-HCl and sample III-THF, other coal samples have a lower methane adsorption capability than raw coal. Methane adsorption is reduced not just by a decrease in the number of micropores but also by aliphatic groups, aromatic structures, and oxygen-containing structures. Relevant results could deliver guiding significance for understanding methane adsorption and flow characteristics in coal after chemical solvent modification.
UR - http://www.scopus.com/inward/record.url?scp=85215064452&partnerID=8YFLogxK
U2 - 10.1021/acs.langmuir.4c04081
DO - 10.1021/acs.langmuir.4c04081
M3 - 文章
C2 - 39741432
AN - SCOPUS:85215064452
SN - 0743-7463
VL - 41
SP - 774
EP - 786
JO - Langmuir
JF - Langmuir
IS - 1
ER -