Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming

Y. L. Hu, X. Lin, S. Y. Zhang, Y. M. Jiang, X. F. Lu, H. O. Yang, W. D. Huang

科研成果: 期刊稿件文章同行评审

153 引用 (Scopus)

摘要

In this study, the effect of solution heat treatments on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming was investigated. The microstructure of deposit was mainly composed of columnar grains, which didn't change until the solution temperature reached 1200 °C after solution heat treatment. Due to the large size Laves phase which can pin grain boundary and obstruct grain boundary migration, the recrystallization fully occurred when the solution temperature exceeded 1200 °C. With the increment of the solution temperature, the average diffusion coefficient of solute elements and the dissolution velocity increased obviously. Besides, the volume fraction and size of Laves phase decreased, and the dislocation density decreased apparently. As a result, the microhardness and yield strength decreased with the increment of the solution temperature, but the tensile strength didn't change much after solution heat treatment, and the elongation increased significantly with the solution temperature improving. The room-temperature tensile properties in different states of Inconel 625 fabricated by laser solid forming were higher than those of Inconel 625 fabricated by casting.

源语言英语
页(从-至)330-344
页数15
期刊Journal of Alloys and Compounds
767
DOI
出版状态已出版 - 30 10月 2018

指纹

探究 'Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming' 的科研主题。它们共同构成独一无二的指纹。

引用此