Effect of geometric defects on the mechanical properties of additive manufactured Ti6Al4V lattice structures

Lattice structures realized by additive manufacturing (AM) have the great potential for a broad range of engineering applications. However, the lattice structures are involved in geometric defects. This paper focuses the effect of geometric defects on the mechanical properties of Ti6Al4V lattice structures manufactured by laser powder bed fusion (L-PBF), three cell topologies, i.e., body centered cubic with vertical struts (BCCZ), face centered cubic with vertical struts (FCCZ), and face and body centered cubic with vertical struts (FBCCZ) were studied. X-ray computed tomography was used to extract the shape and the distribution of process-induced geometric defects of these three kinds of samples. Probability density distributions of geometric defects in each layer were also established to analyze the effect of the printing sequence on geometric defects. Then these distributions of geometric defects were inputted into Abaqus to build the modified statistical models to study the effect of geometric defects on mechanical properties. It is shown that the deviation of the cross-section radius exhibits normal distribution and the deviation of the center axis offset exhibits logarithmic distribution. And the middle layer of the sample has a better manufacturing precision. The modified statistical model can predict the mechanical properties within an error of 5 %. The strut thickness deviation had a more significant effect on the mechanical properties than the strut waviness.