Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill

Yuhua Shi; Peng Shang; Shibei Wang; Nieyong Huang

doi:10.1109/ICMA49215.2020.9233840

Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill

Yuhua Shi, Peng Shang, Shibei Wang, Nieyong Huang

Engineering University of PAP

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

2 引用（Scopus）

摘要

The BTA (Boring and Trepanning Association) deep-hole drilling is a self-guided machining method. The cutting force and its distribution of cutting tooth and guide pads of the BTA drill plays an essential role in the manufacturing process. This paper aims to analyze the influence of the teeth location and geometric dimensions of BTA drill on the drilling process, and study cutting force distribution of unit cutting tooth of three typical BTA drills. It ran experiments on three typical BTA drills cutting the different diameter cylinder workpiece based on the experimental platforms of BTA drilling and cutting force measuring system. The results show that the cutting force components of unit cutting tooth of three typical BTA drills present the non-uniform distribution which is increasing as the radius increases. The teeth location and geometric dimensions of BTA drills only affect the radial force of unit tooth, but has negligible impact on the main cutting force and axial force of the unit tooth and the drilling force distribution of unit tooth along the radius. The results provide reference information for designing and optimizing the staggered teeth BTA drill.

源语言	英语
主期刊名	2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020
出版商	Institute of Electrical and Electronics Engineers Inc.
页	530-535
页数	6
ISBN（电子版）	9781728164151
DOI	https://doi.org/10.1109/ICMA49215.2020.9233840
出版状态	已出版 - 13 10月 2020
已对外发布	是
活动	17th IEEE International Conference on Mechatronics and Automation, ICMA 2020 - Beijing, 中国期限: 13 10月 2020 → 16 10月 2020

出版系列

姓名	2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020

会议

会议	17th IEEE International Conference on Mechatronics and Automation, ICMA 2020
国家/地区	中国
市	Beijing
时期	13/10/20 → 16/10/20

访问文件

10.1109/ICMA49215.2020.9233840

其它文件与链接

链接到 Scopus 的出版物

引用此

Shi, Y., Shang, P., Wang, S., & Huang, N. (2020). Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill. 在 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020 (页码 530-535). 文章 9233840 (2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICMA49215.2020.9233840

Shi, Yuhua ; Shang, Peng ; Wang, Shibei 等. / Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill. 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 页码 530-535 (2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020).

@inproceedings{1f612059a5cd4004943ef90b7c2fa103,

title = "Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill",

abstract = "The BTA (Boring and Trepanning Association) deep-hole drilling is a self-guided machining method. The cutting force and its distribution of cutting tooth and guide pads of the BTA drill plays an essential role in the manufacturing process. This paper aims to analyze the influence of the teeth location and geometric dimensions of BTA drill on the drilling process, and study cutting force distribution of unit cutting tooth of three typical BTA drills. It ran experiments on three typical BTA drills cutting the different diameter cylinder workpiece based on the experimental platforms of BTA drilling and cutting force measuring system. The results show that the cutting force components of unit cutting tooth of three typical BTA drills present the non-uniform distribution which is increasing as the radius increases. The teeth location and geometric dimensions of BTA drills only affect the radial force of unit tooth, but has negligible impact on the main cutting force and axial force of the unit tooth and the drilling force distribution of unit tooth along the radius. The results provide reference information for designing and optimizing the staggered teeth BTA drill.",

keywords = "BTA drill, Cutting force distribution, Cutting force measuring, Unit cutting tooth",

author = "Yuhua Shi and Peng Shang and Shibei Wang and Nieyong Huang",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 17th IEEE International Conference on Mechatronics and Automation, ICMA 2020 ; Conference date: 13-10-2020 Through 16-10-2020",

year = "2020",

month = oct,

day = "13",

doi = "10.1109/ICMA49215.2020.9233840",

language = "英语",

series = "2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "530--535",

booktitle = "2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020",

}

Shi, Y, Shang, P, Wang, S & Huang, N 2020, Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill. 在 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020., 9233840, 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020, Institute of Electrical and Electronics Engineers Inc., 页码 530-535, 17th IEEE International Conference on Mechatronics and Automation, ICMA 2020, Beijing, 中国, 13/10/20. https://doi.org/10.1109/ICMA49215.2020.9233840

Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill. / Shi, Yuhua; Shang, Peng; Wang, Shibei 等.
2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 页码 530-535 9233840 (2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill

AU - Shi, Yuhua

AU - Shang, Peng

AU - Wang, Shibei

AU - Huang, Nieyong

PY - 2020/10/13

Y1 - 2020/10/13

N2 - The BTA (Boring and Trepanning Association) deep-hole drilling is a self-guided machining method. The cutting force and its distribution of cutting tooth and guide pads of the BTA drill plays an essential role in the manufacturing process. This paper aims to analyze the influence of the teeth location and geometric dimensions of BTA drill on the drilling process, and study cutting force distribution of unit cutting tooth of three typical BTA drills. It ran experiments on three typical BTA drills cutting the different diameter cylinder workpiece based on the experimental platforms of BTA drilling and cutting force measuring system. The results show that the cutting force components of unit cutting tooth of three typical BTA drills present the non-uniform distribution which is increasing as the radius increases. The teeth location and geometric dimensions of BTA drills only affect the radial force of unit tooth, but has negligible impact on the main cutting force and axial force of the unit tooth and the drilling force distribution of unit tooth along the radius. The results provide reference information for designing and optimizing the staggered teeth BTA drill.

AB - The BTA (Boring and Trepanning Association) deep-hole drilling is a self-guided machining method. The cutting force and its distribution of cutting tooth and guide pads of the BTA drill plays an essential role in the manufacturing process. This paper aims to analyze the influence of the teeth location and geometric dimensions of BTA drill on the drilling process, and study cutting force distribution of unit cutting tooth of three typical BTA drills. It ran experiments on three typical BTA drills cutting the different diameter cylinder workpiece based on the experimental platforms of BTA drilling and cutting force measuring system. The results show that the cutting force components of unit cutting tooth of three typical BTA drills present the non-uniform distribution which is increasing as the radius increases. The teeth location and geometric dimensions of BTA drills only affect the radial force of unit tooth, but has negligible impact on the main cutting force and axial force of the unit tooth and the drilling force distribution of unit tooth along the radius. The results provide reference information for designing and optimizing the staggered teeth BTA drill.

KW - BTA drill

KW - Cutting force distribution

KW - Cutting force measuring

KW - Unit cutting tooth

UR - http://www.scopus.com/inward/record.url?scp=85096510959&partnerID=8YFLogxK

U2 - 10.1109/ICMA49215.2020.9233840

DO - 10.1109/ICMA49215.2020.9233840

M3 - 会议稿件

AN - SCOPUS:85096510959

T3 - 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020

SP - 530

EP - 535

BT - 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 17th IEEE International Conference on Mechatronics and Automation, ICMA 2020

Y2 - 13 October 2020 through 16 October 2020

ER -

Shi Y, Shang P, Wang S, Huang N. Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill. 在 2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020. Institute of Electrical and Electronics Engineers Inc. 2020. 页码 530-535. 9233840. (2020 IEEE International Conference on Mechatronics and Automation, ICMA 2020). doi: 10.1109/ICMA49215.2020.9233840

Cutting Process and Force Distribution of Three Typical BTA Drills for BTA Deep Hole Drill

摘要

出版系列

会议

访问文件

其它文件与链接

指纹

引用此