Corrigendum to “High cycle fatigue performance and corresponding fracture behaviors of GH4169 studs formed by thread warm rolling process” [Int. J. Fatigue 193 (2025) 108808] (International Journal of Fatigue (2025) 193, (S0142112325000052), (10.1016/j.ijfatigue.2025.108808))

The authors regret to inform that there are correction in Fig. 13 & acknowledgements section. Please find below for further details. Corrigenda 1 (Fig. 13):[Figure presented] Fig. 13. The fatigue striation spacing of the fractured RF sample at varying distances from the fatigue source zone. Fatigue sample data: R=0.06, σ_max=800 MPa, N_f =420215 cycles. (a) Located 0.35 mm from the fatigue source zone. (b) Located 2.00 mm from the fatigue source zone. (c) Located 3.65 mm from the fatigue source zone. (d) The overall morphology of stable fatigue crack propagation zone. should be amended to[Figure presented] Fig. 13. The fatigue striation spacing of the fractured RF sample at varying distances from the fatigue source zone. Fatigue sample data: R=0.06, σ_max=800 MPa, N_f =420215 cycles. (a) Located 0.35 mm from the fatigue source zone. (b) Located 2.00 mm from the fatigue source zone. (c) Located 3.65 mm from the fatigue source zone. (d) The overall morphology of stable fatigue crack propagation zone. Note: Only the Fig. 13 itself has been corrected; the title has not been changed. Corrigenda 2 (Acknowledgment): “This work was supported by the National Natural Science Foundation of China (NSFC) (Grant No. 51974258), and National College Students Innovation and Entrepreneurship Training Program.” should be amended to “This work was supported by the National Science and Technology Major Project (Grant No. 2024ZD0600100), the National Natural Science Foundation of China (Grant No. 51974258), and National College Students Innovation and Entrepreneurship Training Program.” After we double-checked, the rest of the paper was corrected according to the reviewer's comments, the only these two issues should be amended in the online version. The authors would like to apologise for any inconvenience caused.