Analysis of the influence of geometric structure on the rotationally induced ingress

Zhenxia Liu, Jun Ma, Jianping Hu, Lifen Zhang

科研成果: 书/报告/会议事项章节会议稿件同行评审

2 引用 (Scopus)

摘要

Rotating air inside the wheel-space creates a radial gradient of pressure which drives the gas ingress through the rim seal. This kind of reason for the gas ingestion is called rotationally induced ingress (RI). The minimum sealing flow rate was proportional to the seal-clearance. The geometric structure, including the position of the seal-clearance, is also important to predict the minimum sealing flow rate for RI ingestion. This paper gets the sealing efficiency and the flow results of different geometric structure through the method of 3D steady compressible CFD (Computational Fluid Dynamics). Because the analysis of the influence of geometry is given under the condition of RI ingestion, a 3D model without turbine blades has been chosen. Some experiments initially revealed that the different sealclearance positions have different sealing efficiency. However, what position would have best sealing efficiency was not given. If the position of seal-clearance is selected in the rotor disc or the static disc, the effect of the "pump" of the rotor disc is more obvious, which makes the gas ingestion serious. When the position of seal-clearance is near the rotor disc, the gas is fully mixed with the cooling air after the ingestion and then flows to the side of the static disc. Therefore, the sealing efficiency of the structure, whose seal-clearance position is near the rotor disc, will be higher than that, whose seal-clearance position is close to the static disc. When the fluid flows to the static disc, the velocity triangle shows that a barrier will be created between the cavity and mainstream in a particular sealclearance position, which makes the efficiency higher than other positions.

源语言英语
主期刊名Heat Transfer
出版商American Society of Mechanical Engineers (ASME)
ISBN(电子版)9780791850886
DOI
出版状态已出版 - 2017
活动ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017 - Charlotte, 美国
期限: 26 6月 201730 6月 2017

出版系列

姓名Proceedings of the ASME Turbo Expo
5B-2017

会议

会议ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017
国家/地区美国
Charlotte
时期26/06/1730/06/17

指纹

探究 'Analysis of the influence of geometric structure on the rotationally induced ingress' 的科研主题。它们共同构成独一无二的指纹。

引用此