An investigation into the influence of processing parameters on the surface quality of AlSi10Mg parts by SLM process

Arfan Majeed, Jingxiang Lv, Yingfeng Zhang, Muhammad Muzamil, Ali Waqas, Khalid Shamim, Muhammad Ejaz Qureshi, Fahad Zafar

科研成果: 书/报告/会议事项章节会议稿件同行评审

32 引用 (Scopus)

摘要

Selective laser melting (SLM) uses powder fusion for the manufacturing of the products in the layer by layer manner. Aluminum alloy AlSi10Mg is broadly used in the aerospace and automotive industry due to its good physical and mechanical features. In this study, we have used different levels of scan speed, laser power and overlap rate for manufacturing of test samples. The aim of the study is to optimize the processing parameters for achieving the best quality products in the additive manufacturing of AlSi10Mg alloy by using SLM technology. A 3-factor, 3-level full factorial Design of Experiments (DoE) with a total of 27 tests, was employed for gathering of experimental data. Finally, we have used the analysis of variance for the optimization of process parameters, and optimized the process parameters for achieving the best surface quality product of AlSi10Mg alloy by SLM process.

源语言英语
主期刊名Proceedings of 2019 16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019
出版商Institute of Electrical and Electronics Engineers Inc.
143-147
页数5
ISBN(电子版)9781538677292
DOI
出版状态已出版 - 13 3月 2019
活动16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019 - Islamabad, 巴基斯坦
期限: 8 1月 201912 1月 2019

出版系列

姓名Proceedings of 2019 16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019

会议

会议16th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2019
国家/地区巴基斯坦
Islamabad
时期8/01/1912/01/19

指纹

探究 'An investigation into the influence of processing parameters on the surface quality of AlSi10Mg parts by SLM process' 的科研主题。它们共同构成独一无二的指纹。

引用此