TY - GEN
T1 - A Bridgeless Cuk PFC Converter Based on One Cycle Control
AU - Wang, Aiben
AU - Huangfu, Yigeng
AU - Zhao, Ben
N1 - Publisher Copyright:
© 2020 IEEE.
PY - 2020/11/6
Y1 - 2020/11/6
N2 - A one cycle control method based on bridgeless Cuk PFC converter is presented in this paper. The converter's operation modes in positive half cycle under one cycle control is analyzed, then it was simulated by PSIM. It is shown in simulation results that the converter under this one cycle control has a higher power-factor and a lower THD, and can resist input voltage disturbances effectively. In addition, the output diode D3 turns off under ZCS, which reduced the conduction loss of the converter.
AB - A one cycle control method based on bridgeless Cuk PFC converter is presented in this paper. The converter's operation modes in positive half cycle under one cycle control is analyzed, then it was simulated by PSIM. It is shown in simulation results that the converter under this one cycle control has a higher power-factor and a lower THD, and can resist input voltage disturbances effectively. In addition, the output diode D3 turns off under ZCS, which reduced the conduction loss of the converter.
KW - bridgeless cuk converter
KW - one cycle control
KW - power factor correction
KW - total harmonic distortion
UR - http://www.scopus.com/inward/record.url?scp=85100924969&partnerID=8YFLogxK
U2 - 10.1109/CAC51589.2020.9327598
DO - 10.1109/CAC51589.2020.9327598
M3 - 会议稿件
AN - SCOPUS:85100924969
T3 - Proceedings - 2020 Chinese Automation Congress, CAC 2020
SP - 4674
EP - 4678
BT - Proceedings - 2020 Chinese Automation Congress, CAC 2020
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2020 Chinese Automation Congress, CAC 2020
Y2 - 6 November 2020 through 8 November 2020
ER -