TY - JOUR
T1 - Solid-liquid interface and growth rate range of Al2O3-based eutectic in situ composites grown by laser floating zone melting
AU - Ren, Qun
AU - Su, Haijun
AU - Zhang, Jun
AU - Yao, Bin
AU - Ma, Weidan
AU - Liu, Lin
AU - Fu, Hengzhi
AU - Huang, Taiwen
AU - Guo, Min
AU - Yang, Wenchao
N1 - Publisher Copyright:
© 2015 Elsevier B.V.
PY - 2016/3/25
Y1 - 2016/3/25
N2 - Directionally solidified Al2O3/Er3Al5O12(EAG) eutectic in situ composites are prepared by laser floating zone melting (LFZM) to investigate the solid-liquid interface characteristic and growth rate range under non-equilibrium solidification conditions. The solid-liquid (S-L) interface is in situ obtained by rapidly quenching, and its microstructure morphology and primary phase based on different eutectic compositions are analyzed. In stable growth zone, the composite presents typically "Chinese script" (CS) irregular eutectic structure consisting of interpenetrated Al2O3 and EAG phases, but in quenched region the regular eutectic lamellae and CS structure are coexisted. Primary Al2O3 phase in hypoeutectic composition is found both in S-L interface front and quenched region. Different from the stable growth zone, in quenched region as the solidification rate increases, the eutectic lamellae spacing does not show obvious decrease. The minimum eutectic lamellae spacing is refined to about 200 nm when the solidification rate is increased up to 100 μm/s. On the basis, according to the Jackson-Hunt (J-H) model, the maximum solidification rate in quenched region is calculated to be smaller than 1.26 × 103 μm/s, and the undercooling degree is 4.15 K.
AB - Directionally solidified Al2O3/Er3Al5O12(EAG) eutectic in situ composites are prepared by laser floating zone melting (LFZM) to investigate the solid-liquid interface characteristic and growth rate range under non-equilibrium solidification conditions. The solid-liquid (S-L) interface is in situ obtained by rapidly quenching, and its microstructure morphology and primary phase based on different eutectic compositions are analyzed. In stable growth zone, the composite presents typically "Chinese script" (CS) irregular eutectic structure consisting of interpenetrated Al2O3 and EAG phases, but in quenched region the regular eutectic lamellae and CS structure are coexisted. Primary Al2O3 phase in hypoeutectic composition is found both in S-L interface front and quenched region. Different from the stable growth zone, in quenched region as the solidification rate increases, the eutectic lamellae spacing does not show obvious decrease. The minimum eutectic lamellae spacing is refined to about 200 nm when the solidification rate is increased up to 100 μm/s. On the basis, according to the Jackson-Hunt (J-H) model, the maximum solidification rate in quenched region is calculated to be smaller than 1.26 × 103 μm/s, and the undercooling degree is 4.15 K.
KW - Eutectic solidification
KW - In situ composite
KW - Laser floating zone melting
KW - Oxide eutectics
KW - Solid-liquid interface
UR - http://www.scopus.com/inward/record.url?scp=84952879178&partnerID=8YFLogxK
U2 - 10.1016/j.jallcom.2015.12.045
DO - 10.1016/j.jallcom.2015.12.045
M3 - 文章
AN - SCOPUS:84952879178
SN - 0925-8388
VL - 662
SP - 634
EP - 639
JO - Journal of Alloys and Compounds
JF - Journal of Alloys and Compounds
ER -